WenmarOpen by Wenmar Pro

Service bulletins for the 2026 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

56 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
SSM 552282026-10-12. Service bulletin. ENGINE; UNKNOWN OR OTHER. Some 2020-2026 Aviator/Explorer/F-150/Bronco/Ranger vehicles equipped with a 2.7L or 3.0L (non-diesel) engine may need the front engine cover removed and reinstalled for various reasons. The Workshop Manual (WSM), Section 303-01 Engine > Removal and Installation > Engine Front Cover service procedure has been updated to include a new essential special service tool (ESST) guide pin alignment tool (303-1790) that is used to align the engine front cover to the engine block, preventing the O-ring seal on the engine oil galley feed tube from getting damaged during installation.
SSM 546782026-04-06. Service bulletin. ENGINE. Some 2021-2026 F-150 vehicles equipped with a 5.0L/5.2L engine, 2021-2025 F-Super Duty/F-53 Motorhome/F59 Commercial Stripped Chassis vehicles equipped with a 6.8L/7.3L engine and 2021-2025 E-Series/F-650/F-750 vehicles equipped with a 7.3L engine may exhibit a rattle/scraping noise upon startup that may remain after the engine is running. Workshop Manual (WSM),
SSM 546562026-03-18. Service bulletin. UNKNOWN OR OTHER; ENGINE; POWER TRAIN. Some 2025-2026 F-150 vehicles built on 01-Oct-2025 and through 15-Dec-2025 may exhibit a "Check 4x4" message with diagnostic trouble code (DTC) U2002:9E stored in the all terrain control module (ATCM). This may be due to the 4L switch being stuck on due to excess material on the lower center instrument panel trim panel keeping the switch depressed. To correct the condition, replace the lower center instrument panel trim panel. Refer to Workshop Manual (WSM), Section 412-00 > Removal and Installation > Heating, Ventilation and Air Conditioning (HVAC) Control Module for reference of all hidden fasteners. For claiming, use causal part 15042C74 and labor operation MT15042C74SSM up to 1.3 hours.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.