Service bulletins for the 2016 Ford F-150
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
283 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Trailer hitch are shown. Show all
| TSB18-2106 | 2018-05-21. Service bulletin. TRAILER HITCHES. Some 2018 Expedition/Navigator vehicles built on or before 24-Feb-2018, 2017-2018 F-Super Duty built on or before 26-Feb-2018 and Transit vehicles built on or before 26-Feb-2018 and 2015-2018 F-150 vehicles built on or before 3-Mar-2018 may exhibit a trailer connected and/or disconnected message in the IPC without a trailer connected. Follow the Service Procedure steps to correct the condition. |
|---|---|
| SSM 46507 | 2017-08-01. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; TRAILER HITCHES; EQUIPMENT. Some 2015-2017 F-150, 2017 F-Super Duty vehicles may have concerns where the instrument cluster defaults back to the trailer tow setup screen every key cycle with no trailer attached. Refer to the Information Display section of the Owners Manual or the following steps to correct this concern. Type 1 and 2 Cluster small display Use the information display controls on the steering wheel and the information display menu. Navigate to Towing and press OK, select Trailer Options and press OK, choose Select Trailer and press OK, finally select No Active Trailer and press OK. Type 3 Cluster large display Use the information display controls on the steering wheel and the information display menu. Navigate to Towing tab, select Trailer Setup and press OK, then press OK to enter Trailer Options, select Change Trailer Selected and press OK, finally select No Active Trailer and press OK. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.