WenmarOpen by Wenmar Pro

Recalls that may apply to the 2011 Ford Explorer

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
24V0310002024-01-19. STRUCTURE:BODY:ROOF AND PILLARS. Ford Motor Company (Ford) is recalling certain 2011-2019 Explorer vehicles. The A-pillar trim retention clips may not be properly engaged, allowing the trim to detach.
21V7460002021-09-22. SUSPENSION:REAR. Ford Motor Company (Ford) is recalling certain 2011-2013 Explorer vehicles originally sold, or currently registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. These vehicles may be equipped with a cross-axis ball joint (CABJ) replacement part that could seize, and result in a fracture of the outboard section of the rear suspension toe link.
19V4350002019-06-10. SUSPENSION:REAR. Ford Motor Company (Ford) is recalling certain 2011-2017 Explorer vehicles. The rear suspension toe links may fracture due to stress on the rear suspension. Built 2010-05-17 to 2017-01-25.
15V1710002015-03-24. STRUCTURE:BODY:DOOR. Ford Motor Company (Ford) is recalling certain model year 2011-2013 Explorer vehicles. In the affected vehicles, the interior door handle return spring may unseat, resulting in interior door handle that does not return to the fully stowed position after actuation. Built 2011-02-01 to 2012-01-31.
14V2860002014-05-29. STEERING:ELECTRIC POWER ASSIST SYSTEM. Ford Motor Company (Ford) is recalling certain model year 2011-2013 Ford Explorer vehicles manufactured May 17, 2010, through February 28, 2012. The affected vehicles may experience an intermittent connection in the electric power steering gear, which can cause a loss of the motor position sensor signal resulting in a shut down of the power steering assist. Built 2010-05-17 to 2012-02-28.
11V0630002011-02-02. SEATS. FORD IS RECALLING CERTAIN MODEL YEAR 2011 EXPLORER VEHICLES MANUFACTURED FROM JULY 15, 2010, THROUGH DECEMBER 13, 2010, EQUIPPED WITH SECOND ROW 60% SEATS WITH MANUAL RECLINER MECHANISMS THAT MAY HAVE COMPONENTS THAT ARE OUT OF DIMENSIONAL SPECIFICATION. THESE SEATS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS."
Canada: Transport Canada, as of 2026-10-19
20240262024-01-22. Structure. Issue: On certain vehicles, the exterior A-pillar trim on either side of the windshield may not be properly attached. As a result, the trim(s) could loosen and separate from the vehicle. Safety Risk: Trim that detaches from the vehicle could create a road hazard for others and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the A-pillar trim.
20192802019-06-11. Suspension. Issue: On certain vehicles, the rear suspension toe link(s) could break. This could cause a sudden loss of vehicle stability. Note: This problem is more likely to occur on vehicles that are driven on rough roads. Safety Risk: A loss of vehicle stability could cause a loss of control and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to install improved rear suspension toe links.
20175772017-11-28. Suspension. On certain vehicles operated in Alberta, Saskatchewan and Manitoba, soil properties unique to these areas could cause an accumulation of soil to occur at the attachment point of the rear suspension toe link. This could impede the toe link's travel, causing bending stresses and potential fracture. A fractured toe link would affect vehicle handling and could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the toe links with revised parts. Note: This is an expansion of recall 2017-224.
20151272015-03-24. Structure. On certain vehicles, the return spring within the interior door handle assembly could become unseated, resulting in an interior handle that does not return to the fully stowed position after actuation. This could allow a door to unlatch during a side impact crash, which could increase the risk of injury to a seat occupant. Correction: Dealers will inspect, and repair or replace the interior handles as necessary.
20141942014-05-28. Steering. On certain vehicles, a fault in the Electric Power Steering (EPS) system could result in an immediate loss of power steering assist without warning to the driver. This would unexpectedly increase the steering effort force necessary to steer the vehicle at lower vehicle speeds, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will affect repairs as necessary and will reprogram the EPS controller with updated software. In the event that an EPS fault occurs, this updated software would allow for continued EPS function while displaying visual and audible warnings to the driver until the end of the drive cycle.
20140022014-01-08. Steering. A safety defect may exist in certain service parts installed after September 1st, 2013. Replacement steering gear assemblies could contain a defect potentially resulting in steering lockup and an inability to steer the vehicle. This would increase the risk of a crash causing injury and/or damage to property. Correction: Owners of affected vehicles will be notified based on warranty and dealer service records and affected parts will be replaced.
20123252012-09-28. Accessories. Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label identifies the vehicle type as "TRU/CAM" instead of "MPV/VTUM". Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
20110462011-01-31. Seats And Restraints. On certain vehicles, the second row 60% seat (with a manual recliner mechanism) may have components that are out of dimensional specifications and thereby may not comply with the seatback strength requirements of the Canada Motor Vehicle Safety Standards 207 - Anchorage of Seats. In the event of a crash, the seatback may not provide the required strength, increasing the risk of injury to the seat occupant. Correction: Dealers will replace the manual recliner mechanism.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.