WenmarOpen by Wenmar Pro

Service bulletins for the 2026 Ford Escape

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

34 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
SSM 552112026-10-06. Over-the-air update. ENGINE; FUEL/PROPULSION SYSTEM; UNKNOWN OR OTHER. 2023-2026 Escape and 2025-2026 Bronco Sport vehicles equipped with a 1.5L EcoBoost engine may require removal of the turbocharger wastegate control actuator linkage for various reasons. The Workshop Manual (WSM), Section 303-04 Fuel Charging and Controls - Turbocharger - 1.5L EcoBoost > Removal and Installation > Wastegate Control Actuator Linkage service procedure has been added. In addition, the wastegate control actuator linkage rod with retaining clips (6K682) and actuator linkage rubber boot seal (9E416) have been released as lower-level components to complete the repair without replacing the entire turbocharger wastegate control actuator assembly.
SSM 546312026-03-11. Service bulletin. ENGINE. Some 2020-2026 Escape and 2022-2026 Maverick 2.5L Duratec hybrid vehicles may require various repairs on the exhaust system. This may require removal of the exhaust heat exchanger. WSM, Section 309-00 Exhaust System > 2.5L Duratec hybrid > Removal and Installation > Exhaust Heat Exchanger has been revised to eliminate the need to remove the muffler assembly. The procedure steps and labor times have been updated to reflect this adjustment.
SSM 545402026-02-04. Service bulletin. ENGINE. Some 2025-2026 Escape/Bronco Sport vehicles equipped with a 1.5L EcoBoost engine may require replacement of the engine thermostat due to various concerns. Workshop Manual (WSM), Section 303-03A Engine Cooling > Thermostat Housing > Removal and Installation has been updated with a revised service procedure eliminating the need to remove the generator assembly to gain access to the thermostat housing.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.