WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Ford Escape

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

173 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Brakes are shown. Show all

Bulletins, newest first
SSM 512612023-01-06. Service bulletin. SERVICE BRAKES. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
SSM 511202022-10-11. Service bulletin. SERVICE BRAKES, HYDRAULIC. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
SSM 500642021-09-04. Service bulletin. SERVICE BRAKES, ELECTRIC:SOFTWARE/PROGRAMMING. Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
SSM 474202018-09-10. Service bulletin. SERVICE BRAKES; EQUIPMENT; ENGINE. Some 2018 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit an oily substance near the bellhousing area that could be perceived as an engine oil leak. This condition could be caused by assembly grease on the end of the crankshaft. Clean the area with Motorcraftù Brake Metal Parts Cleaner PM-4-A and compressed air. Add 1 oz. of Rotunda white engine oil dye 164-TP33200601 or equivalent to the engine and road test for 10 miles. Reinspect suspect area with Rotunda pure ultraviolet (UV) black light 164-TP8695 or 164-R3748 or equivalent. If evidence of white dye is found, follow Workshop Manual (WSM), Section 300-00 for engine oil leak diagnosis.
18U17-S12018-07-23. Service bulletin. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER; EQUIPMENT; SERVICE BRAKES, AIR:DISC:CALIPER. Certain 2018 Model Year Escape and MKC Vehicles - Rear Brake Caliper Bolt Torque

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.