Service bulletins for the 2022 Ford Edge
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
101 on file from NHTSA, as of 2026-10-19.
About C1001 on the 2022 Ford Edge: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
Only bulletins with trouble code: C1001 are shown. Show all
| SSM 50456 | 2022-02-16. Service bulletin. BACK OVER PREVENTION; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM:WIRING. Some 2021-2022 Edge vehicles may exhibit various image issues such as infrared, distorted, glitching, flickering or fuzzy image in the rear view camera with DTC C1001 stored in the Image Processing Module B or Sync module and/or B115E stored in the body control module (BCM). This may be due to a poor circuit connection. Inspect both male and female sides of connectors C4357 and C2383A for loose, bent, or damaged terminals. Refer to Workshop Manual (WSM), Section 100-00 General Information > Wire Terminal Inspection and Removal. If there is damage detected, refer to cell 005 of the wiring diagram to perform the repair procedure. In addition to the wiring inspection, make sure the IPMB and the APIM are in the latest software level. If there is no damage, continue with the normal diagnosis. |
|---|
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.