WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

210 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Brakes are shown. Show all

Bulletins, newest first
SSM 552402026-10-13. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; SERVICE BRAKES. Some 2021-2024 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. This may be due to pin fitment at the brake fluid level sensor connector. To resolve this concern, replace the brake fluid reservoir and replace the brake fluid level sensor electrical connector C1052 with service pigtail wiring kit 3U2Z-14S411-BXAB. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
SSM 544312025-12-10. Service bulletin. SERVICE BRAKES. Some 2021-2024 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. Replace the brake fluid reservoir and the brake fluid level sensor electrical connector. Do not disconnect the brake fluid level sensor electrical connector, cut the connector 3-4 inches (75-100 mm) from the connector end and leave the brake fluid level sensor electrical connector attached to brake fluid reservoir. Include these parts in the same package when returning warranty replacement brake fluid reservoirs. The brake fluid reservoir with the electrical connector still connected should be packaged in the original box to protect it during shipping. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
SSM 543622025-11-12. Service bulletin. SERVICE BRAKES; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2025 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. Replace the brake fluid reservoir and the brake fluid level sensor electrical connector. Do not disconnect the brake fluid level sensor electrical connector, cut the connector 3-4 inches (75-100 mm) from the connector end and leave the brake fluid level sensor electrical connector attached to brake fluid reservoir. Include these parts in the same package when returning warranty replacement brake fluid reservoirs. The brake fluid reservoir with the electrical connector still connected should be packaged in the original box to protect it during shipping. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
SU4 P4 BRONCO2023-11-03. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:INFOTAINMENT; SERVICE BRAKES. Software Update SU4 P4 for 2022-2023 Bronco is now available. Quality improvements include: - Prevent unintended Fuel level MIL after future OTA updates. -Various Apple Carplay quality improvements -Electronic Brake Boost (EBB) interaction enhancement during neutral tow operation.
SSM 512612023-01-06. Service bulletin. SERVICE BRAKES. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
SSM 512272023-01-05. Service bulletin. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; ENGINE AND ENGINE COOLING. Some 2021-2023 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit noises coming from the brake pedal while applying and/or releasing the brake pedal or while the vehicle is off without brake pedal application. A single click and/or clunk may be heard during brake pedal application and again on brake pedal release and is considered normal. Clicking may also be heard while the vehicle is off, and without the brake pedal being applied. The clicking heard with the vehicle off is due to the EBB going through the normal shut-down process. The amount of noise will vary between EBB modules and replacement of the EBB module is not expected to reduce the noises.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.