WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Ford Bronco Sport

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

114 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Heating and air conditioning are shown. Show all

Bulletins, newest first
SSM 518742023-09-02. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Some 2021-2023 Bronco Sport and 2020-2023 Escape vehicles may exhibit a rattle or flapping noise coming from the rear air extractors while driving. This may be due to the normal operation of the rear air extractors. To determine if this is a normal condition, perform a road test at 40 mph (65 km/h) or above. Inspect if the noise is coming from the rear extractors. During the road test alternate air conditioning (A/C) between fresh mode and air re-circulation mode. If the noise is eliminated when the A/C is in fresh mode, this is considered a normal characteristic of the vehicle and no repairs should be performed.
SSM 517242023-06-28. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; EQUIPMENT. Some 2021-2023 Bronco Sport vehicles equipped with a 1.5L engine may exhibit: insufficient cooling from the air conditioning (A/C), under hood popping/knocking/hissing noises and/or under hood smoke, coolant stains and/or spills on to the A/C compressor and clutch assembly. The compressor clutch might fail after operating the A/C system if the exterior of the compressor gets wet. Perform pin point test J, refer to the Workshop Manual, Section 412-00 Climate Control System > General Information > Diagnosis and Testing. If a compressor clutch failure is identified, replace the compressor clutch only. Do not replace the A/C compressor if no performance issues are identified. Document the PPT J results in the warranty claim. For claiming, use causal part 19V649 and applicable labor operations in Section 11 of the Service Labor Time Standards (SLTS) Manual.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.