Recalls that may apply to the 1994 Dodge Ram
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about Suspension are shown.
| 99V214000 | 1999-08-09. SUSPENSION:FRONT:SHOCK ABSORBER. VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. (2500 AND 3500 SERIES 4X4 REGULAR CAB PICKUP PRODUCED BEFORE MARCH 21, 1995; 2500 AND 3500 SERIES 4X4 CLUB CAB PICKUP PRODUCED BEFORE JUNE 8, 1995; AND 3500 SERIES 4X2/4X4 CHASSIS CAB TRUCKS PRODUCED BEFORE JUNE 21, 1995). THE FRONT SUSPENSION SPRING/SHOCK TOWERS CAN CRACK AND EVENTUALLY SEPARATE FROM THE VEHICLE FRAME. THE SHOCK TOWER COULD DAMAGE THE REAR WHEEL BRAKE LINES RESULTING IN LOSS OF REAR BRAKE SYSTEM PRESSURE. Built 1993-07-01 to 1995-06-30. |
|---|---|
| 94V202000 | 1994-10-18. SUSPENSION:FRONT. THE FRONT SUSPENSION TRACK BAR BRACKET ATTACHMENT HAS INADEQUATE FATIGUE STRENGTH AND CAN FAIL, CAUSING FRONT AXLE VIBRATION. Built 1993-10-01 to 1994-06-01. |
| 94V097000 | 1994-05-20. SUSPENSION:FRONT. THE FRONT SUSPENSION TRACK BAR HAS INADEQUATE FATIGUE STRENGTH. Built 1993-10-01 to 1993-12-01. |
| 93V173000 | 1993-10-22. SUSPENSION:FRONT. FRONT SUSPENSION TRACK BAR ATTACHMENT TO THE AXLE MAY NOT BE ADEQUATELY TIGHTENED. Built 1993-07-01 to 1993-09-01. |
| 1999158 | 1999-08-27. Suspension. On certain pickup trucks equipped with a diesel or V-10 engine, the front suspension spring/shock towers may crack and eventually separate from the vehicle frame. If the left side tower cracking goes undetected by the operator and separates from the frame, the shock tower may damage the rear wheel brake lines. If this happens, this may result in reduced system pressure creating the potential for increased stopping distances. Correction: Spring/shock towers will be inspected and vehicles exhibiting cracking will have the towers replaced with a tower that incorporates reinforcement. Vehicles that do not exhibit cracking will have a weld on reinforcement added. |
|---|---|
| 1994156 | 1994-10-26. Suspension. On certain Ram 3500 vehicles, the front suspension track bar bracket attachment may have inadequate fatigue strength which may result in long range durability failure if the truck is operated at or near its maximum gross vehicle weight. This could result in front axle vibration and the potential for directional control difficulty. Correction: A front suspension track bar bracket reinforcement strut will be installed on affected vehicles. |
| 1994104 | 1994-06-03. Suspension. On certain vehicles, the front suspension track bar may have inadequate fatigue strength and may eventually fail. This could result in front axle vibration and the potential for directional control difficulty. Correction: The front suspension track bar will be replaced. |
| 1993149 | 1993-11-05. Suspension. ON RAM 4X4 VEHICLES, THE FRONT SUSPENSION TRACK BAR ATTACHMENT TO THE AXLE MAY BECOME LOOSE. LOSS OF THE ATTACHMENT MAY RESULT IN FRONT AXLE VIBRATION WITH THE POSSIBILITY OF REDUCED STEERING CONTROL. CORRECTION: THE FRONT SUSPENSION TRACK BAR TO AXLE ATTACHMENT WILL BE TIGHTENED TO SPECIFIED TORQUE. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.