Service bulletins for the 2015 Dodge Durango
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
349 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| 0801616 | 2022-08-22. Service bulletin. SEATS; ELECTRICAL SYSTEM; WHEELS. This bulletin involves updating the Comfort Seat and Wheel Module (CSWM) software for |
|---|---|
| 0300116 | 2022-08-22. Service bulletin. UNKNOWN OR OTHER; POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT. Replace Left Front Axle Half Shaft. |
| 08-028-17 | 2022-08-08. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. RA3 And RA4 Radio Over The Air Software Updates This bulletin provides information regarding the latest Flash Over The Air update (FOTA) and provides a service technician an overview of the steps a customer will need to take to complete the update. The following improvements are included in this update: Adds Apple Siri® Eyes Free capability for iPhone® owners. Auto Play can now be configured. Adds do not disturb text message feature. The ability to drag and drop icons into the menu bar. Fix for radio locks up/frozen. Fix for stuck on black/blank screen. Human Machine Interface (HMI) improvements. Several navigation improvements. Fix for radio loses time. Charge Complete notification is not received (RU PHEV only). Media devices, Phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhanced Voice recognition (VR) performance. Enhancements in Connectivity Apps (Yelp, Pandora, Aha, etc). |
| 9003696 | 2022-08-08. Service bulletin. STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS. Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair. |
| 9003694 | 2022-08-08. Service bulletin. FUEL SYSTEM, GASOLINE. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system |
| 9003669 | 2022-08-08. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Auto Trans Rotary Electronic Shifter The rotary shifter is designed to actuate a motor within the device whenever the driver places their foot on the brake, with the car in Park (or Neutral). This generates a noise with each brake press/release. Therefore, even after replacing the shifter for a noise complaint, the replacement part will also have a characteristic noise generated whenever the driver steps on the brake. Before performing a repair procedure for a noise complaint, please perform a subjective analysis of the noise coming from the rotary shifter. If the shifter noise is deemed abnormal sound (has an uncharacteristic buzz or grind), please proceed with normal replacement procedure. If so equipped, record the sound with a handheld microphone, or cell phone, and if noise is above 54dB @ 30cm away from the knob, please proceed with normal replacement procedure. For any further questions, please contact Theodore Kahiya at cell (519) 300-2443. |
| 08-019-17 REV. B | 2022-08-08. Service bulletin. AIR BAGS; BACK OVER PREVENTION; PARKING BRAKE; ELECTRICAL SYSTEM. RG3 RG4 RJ3 RJ4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. A small number of customers may experience one or more of the following:Navigation failed message is displayed (WK and KL with RG3 and RG4). The clock not automatically updating to local time (WK and KL with RG3 and RG4). Poor or no connection to cellular network (WK and KL with RG3 and RG4). HVAC temperature out of sync with radio display (KL with RG3 and RG4). Some Uconnect App remote commands do not execute with the vehicle. Display goes blank/black (WK and KL with RG3 and RG4). Cyrillic keyboard is missing in phone book (WK and KL with RG3 or RG4). Wrong speed limit on NAV speed camera indication (WK and KL with RG3 or RG4). Blind Spot module beep or chime sound may be heard continuously (KL Only). Radio may keep the CAN bus network awake, causing a battery drain. Voice Recognition (VR) to set temperature, will indicate wrong setting to rear seat temperature. Not possible to set temperature in degrees Celsius using the VR (UK vehicles only). Teleprompter does not appear when pressing the VR button. VR operation cancels while in media mode. Radio may display camera?s previous image before displaying the current image. Navigation lost vehicle position during route calculation. Navigation displays are missing after vehicle heading changes. Navigation giving incorrect guidance to exit the highway. FM audio may switch to AM after ignition cycle. Text messages appear as sender?s phone number, not their name. VR phone button may not work at times. Audio muted after AUX device is disconnected. VR ?Listen? to text will only play first message. Drive Mode: Eco, Sport or Normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). Speed adjusted volume may not work. AM/FM seek or tuner soft keys may be missing. Display screen shows ambient tempe |
| 25-002-15 REV. B | 2022-08-08. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. P0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak |
| 21-027-15 REV. C | 2022-08-08. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING; FUEL SYSTEM, GASOLINE; POWER TRAIN. Flash: Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience an erroneous Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find a Diagnostic Trouble Code (DTC) stored in the TCM memory. In addition, the following TCM calibration improvements are also available for vehicles equipped with the 845RE 8 speed transmission (Sales Code DFL). These improvements are listed per engine application. 3.0L Gas Engine (Sales Code EHD) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved upshift timing. ? Improved torque converter engagement. ? Improved shift timing during tow mode operation. ? Improved shift points during aggressive driving. ? Calibration improvement to correct bump feel during 2-1 downshift. ? Improved shift timing while in snow, base, and hill modes. 3.6L Gas Engine (Sales Code ERB) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved 4-3 and 3-2 downshifts. ? Improved shift timing at higher altitudes. ? Improved shift timing while in sand mode. ? Calibration improvement for multi-gear downshift timing during passing maneuvers. ? Calibration improvement for intermittent delayed upshift. |
| 18-070-15 | 2022-08-08. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: PCM Software Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P0301- Cylinder 1 Misfire ? P0302- Cylinder 2 Misfire ? P0303- Cylinder 3 Misfire ? P0304- Cylinder 4 Misfire ? P0305- Cylinder 5 Misfire ? P0306- Cylinder 6 Misfire ? P0300- Multiple Cylinder Misfire ? P0513- Invalid SKIM Key |
| 25-002-15 REV. A | 2022-08-08. Service bulletin. FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING. P0455 And/Or P0456 Set In The PCM This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak |
| 08-079-15 REV. B | 2022-08-08. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; PARKING BRAKE. Key Not Detected This bulletin involves reprogramming the Radio Frequency Hub Module (RFHM) with the latest available software. A customer may describe the following conditions: ? When the Stop/Start button is pressed a ?Key Not Detected? message is displayed in the Instrument Cluster. ? If the plastic edge of the key is pressed and held against the Stop/Start button a ?Key Not Detected? message is displayed in the Instrument Cluster. NOTE: The RKE Lock/Unlock functions are functional. |
| 1NV00LU5A$ | 2022-08-08. Service bulletin. STRUCTURE. Part Description: CARPET ASSY - FLOOR Issue Description: Do not replace Carpet due to exposed floor pan or carpet white backing along the Sill or B-Pillar Trim. Please rake (rub) a plastic or non-abrasive tool (e.g. credit card edge) to relax the carpet backing and fibers such that fibers stand up and the carpet backing is no longer exposed. Replace Carpet if backing is still visible. Do not replace Carpet that exhibits bulging or intrusion into front passenger footwell. Please assess and reposition Carpet to flush position. If Carpet repositioning is difficult, remove Kick Panel and maneuver Wire Harness as necessary. |
| 68166105A$ | 2022-08-08. Service bulletin. EQUIPMENT; POWER TRAIN. Part Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual. |
| L0003157$$ | 2022-08-08. Service bulletin. EQUIPMENT:ELECTRICAL. Part Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 ryan.lucas@fcagroup.com, if you have further questions. |
| 08-019-17 REV. B | 2022-07-25. Service bulletin. AIR BAGS; BACK OVER PREVENTION; PARKING BRAKE; ELECTRICAL SYSTEM. RG3 RG4 RJ3 RJ4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. A small number of customers may experience one or more of the following: Navigation failed message is displayed (WK and KL with RG3 and RG4). The clock not automatically updating to local time (WK and KL with RG3 and RG4). Poor or no connection to cellular network (WK and KL with RG3 and RG4). HVAC temperature out of sync with radio display (KL with RG3 and RG4). Some Uconnect App remote commands do not execute with the vehicle. Display goes blank/black (WK and KL with RG3 and RG4). Cyrillic keyboard is missing in phone book (WK and KL with RG3 or RG4). Wrong speed limit on NAV speed camera indication (WK and KL with RG3 or RG4). Blind Spot module beep or chime sound may be heard continuously (KL Only). Radio may keep the CAN bus network awake, causing a battery drain. Voice Recognition (VR) to set temperature, will indicate wrong setting to rear seat temperature. Not possible to set temperature in degrees Celsius using the VR (UK vehicles only). Teleprompter does not appear when pressing the VR button. VR operation cancels while in media mode. Radio may display camera?s previous image before displaying the current image. Navigation lost vehicle position during route calculation. Navigation displays are missing after vehicle heading changes. Navigation giving incorrect guidance to exit the highway. FM audio may switch to AM after ignition cycle. Text messages appear as sender?s phone number, not their name. VR phone button may not work at times. Audio muted after AUX device is disconnected. VR ?Listen? to text will only play first message. Drive Mode: Eco, Sport or Normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). Speed adjusted volume may not work. AM/FM seek or tuner soft keys may be missing. Display screen shows ambient temperature as ?- - ? not n |
| 25-002-15 REV. B | 2022-07-25. Service bulletin. ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING. P0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak |
| 21-027-15 REV. C | 2022-07-25. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN; EQUIPMENT ADAPTIVE/MOBILITY. Flash: Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience an erroneous Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find a Diagnostic Trouble Code (DTC) stored in the TCM memory. In addition, the following TCM calibration improvements are also available for vehicles equipped with the 845RE 8 speed transmission (Sales Code DFL). These improvements are listed per engine application. 3.0L Gas Engine (Sales Code EHD) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved upshift timing. ? Improved torque converter engagement. ? Improved shift timing during tow mode operation. ? Improved shift points during aggressive driving. ? Calibration improvement to correct bump feel during 2-1 downshift. ? Improved shift timing while in snow, base, and hill modes. 3.6L Gas Engine (Sales Code ERB) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved 4-3 and 3-2 downshifts. ? Improved shift timing at higher altitudes. ? Improved shift timing while in sand mode. ? Calibration improvement for multi-gear downshift timing during passing maneuvers. ? Calibration improvement for intermittent delayed upshift. |
| 18-070-15 | 2022-07-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT; ELECTRICAL SYSTEM. Flash: PCM Software Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P0301- Cylinder 1 Misfire ? P0302- Cylinder 2 Misfire ? P0303- Cylinder 3 Misfire ? P0304- Cylinder 4 Misfire ? P0305- Cylinder 5 Misfire ? P0306- Cylinder 6 Misfire ? P0300- Multiple Cylinder Misfire ? P0513- Invalid SKIM Key |
| 25-002-15 REV. A | 2022-07-25. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, GASOLINE. P0455 And/Or P0456 Set In The PCM This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak |
| 08-079-15 REV. B | 2022-07-25. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Key Not Detected This bulletin involves reprogramming the Radio Frequency Hub Module (RFHM) with the latest available software. A customer may describe the following conditions: ? When the Stop/Start button is pressed a ?Key Not Detected? message is displayed in the Instrument Cluster. ? If the plastic edge of the key is pressed and held against the Stop/Start button a ?Key Not Detected? message is displayed in the Instrument Cluster. NOTE: The RKE Lock/Unlock functions are functional. |
| 1NV00LU5A$ | 2022-07-25. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS. Part Description: CARPET ASSY - FLOOR Issue Description: Do not replace Carpet due to exposed floor pan or carpet white backing along the Sill or B-Pillar Trim. Please rake (rub) a plastic or non-abrasive tool (e.g. credit card edge) to relax the carpet backing and fibers such that fibers stand up and the carpet backing is no longer exposed. Replace Carpet if backing is still visible. Do not replace Carpet that exhibits bulging or intrusion into front passenger footwell. Please assess and reposition Carpet to flush position. If Carpet repositioning is difficult, remove Kick Panel and maneuver Wire Harness as necessary. |
| 68166105A$ | 2022-07-25. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT; POWER TRAIN. Part Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual. |
| L0003157$$ | 2022-07-25. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING:TURN SIGNAL:BULBS. Part Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 ryan.lucas@fcagroup.com, if you have further questions. |
| S1709000010 Rev. | 2022-07-18. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.