WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Dodge Durango

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

372 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
08072142022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. Intermittently The Vehicle Will Not Shift Out Of Park This bulletin involves replacing the electronic shifter, if required. The customer may experience not being able to shift out of park. This condition can be corrected by turning off the vehicle and allowing all of the modules to go to sleep. Once the modules have gone through a key cycle the DTC will go from active to stored and then the vehicle can be shifted out of park. On further inspection DTCs P0607-00-ECU INTERNAL PERFORMANCE and P0928-00-BTSI CONTROL may be found active or stored.
S1709000010RevB2022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR; UNKNOWN OR OTHER. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
90033572022-09-15. Service bulletin. ENGINE AND ENGINE COOLING. Pentastar Oil Filter Adapter All vehicles equipped with a 3.2L or 3.6L engine; If replacing the Oil Filter Adapter (OFA) due to a leak detected between OFA and block, an O-ring kit (68191356AA) is now available to repair OFA/Block Interface leaks. Using dye will assist in determining source of leak. Ensure OFA Cap Oring is seated in the proper groove in the cap and not damaged or cut. Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison Cell (248-292-9510) ron.dallison@fcagroup.com Joe Lovell Cell (734) 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.
68105583A2022-08-22. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN. Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~
18-034-14 REV. A2022-08-15. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM. P0520- Engine Oil Pressure Sensor Circuit This bulletin involves replacing the oil pressure sensor with a revised part. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0520 - Engine Oil Pressure Sensor Circuit
S1709000010 Rev.2022-07-18. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
S18090000072022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. Customer Complaint May Include Engine Oil Leak Or Consumption
S1709000010 RevB2022-05-31. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
S1809000007 Rev.2021-06-28. Service bulletin. ENGINE AND ENGINE COOLING. Customer Complaint May Include Engine Oil Leak Or Consumption
S1809000007 Rev.2021-04-26. Service bulletin. ENGINE AND ENGINE COOLING. Customer complaint may include engine oil leak/consumption.
90033572021-04-26. Service bulletin. ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter (Pentastar V6) All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor. 5) When replacing PN's 68310865A$ & 68308741A$, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
S1709000010 Rev.2021-02-16. Service bulletin. ENGINE AND ENGINE COOLING. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
18-056-162020-10-26. Service bulletin. ENGINE; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION. Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. These symptoms are broken down by vehicle: 2015 WK 3.0L engine (Sales Code EHD) · ** P0456 - EVAP System Small Leak.** · Enhancements to remote engine start. 2015 WK 5.7L engine (Sales Code EZH) · ** P0456 - EVAP System Small Leak.** · U0140-00 - Lost Communication with Body Control Module (BCM). · Enhancements to improve a slight lag or hesitation during Multi Displacement System (MDS) mode transitions. · Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. 2014 WD 5.7L engine (Sales Code EZH) · Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. 2015 WD 5.7L engine (Sales Code EZH) · ** P0456 - EVAP System Small Leak.** · Enhancements to remote engine start.
S20080001132020-09-28. Service bulletin. ENGINE; ELECTRICAL SYSTEM. No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
18-096-152019-05-20. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN; ENGINE. Flash: Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience one or more of the symptoms/conditions listed below or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set. If any of the following DTCs have been set perform the Diagnosis: - U0140 - Lost Communication With Body Control Module. Attempting to clear this DTC will be unsuccessful. - P0300 - Multiple Cylinder Misfire (only applies to 5.7L engines). - P0573 - Brake Switch 1 Stuck Off. The following powertrain system improvements/enhancements are also included in this software release: - Corrected a generic scan tool display issue regarding Mode 6 data accuracy. - Improved transmission Quick Learn routine performance (only applies to 5.7L engines).
18-082-152019-05-20. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN. Flash: Powertrain Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The following powertrain system improvements/enhancements are included in this software release. These symptoms are broken down by vehicle. 2015 WK 3.0L engine (Sales Code EHD) ? Enhancements to remote engine start. 2015 WK 5.7L engine (Sales Code EZH) ? Enhancements to improve a slight lag or hesitation during Multi Displacement System (MDS) mode transitions. ? Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. ? Malfunction Indicator Lamp (MIL) illuminated with Diagnostic Trouble Code (DTC) U0140-00 - Lost Communication with Body Control Module (BCM). 2014 WD 5.7L engine (Sales Code EZH) ? Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. 2015 WD 5.7L engine (Sales Code EZH) ? Enhancements to remote engine start.
09-010-152018-11-26. Service bulletin. ENGINE. Incorrect 5.7L Engine Oil Dipstick This bulletin involves installing the correct engine oil indicator (Dipstick). The customer may notice blue smoke coming from the tail pipe after the vehicle was started. Also after performing an oil change the Dipstick may indicate the oil was low. When changing the oil and filter, service information shows 7 quarts / 6.6 liters are required. After installing 7 quarts / 6.6 liters the Dipstick may indicate the engine oil level is 1 quart / .95 liters low.
09-008-152018-11-26. Service bulletin. ENGINE. 3.6L Oil Loss Diagnostic Aid This bulletin involves additional information on oil loss.
21-004-152018-11-19. Service bulletin. POWER TRAIN; ENGINE; ELECTRICAL SYSTEM. Flash: 845RE Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. The following TCM calibration improvements are available for vehicles equipped an 845RE Automatic Transmission (Sales Code DFL). These updates are listed by vehicle and engine. LD and LX vehicles equipped with a 3.6L engine (Sales Code ERB) ? Software to correct a harsh bump feel during a 2-1 downshift. ? Software to enable the scan tool based transmission ?Quick Learn.? ? Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles. LX and WK vehicles equipped with a 3.0L engine (Sales Code EHD) ? Software to correct a harsh bump feel during a 2-1 downshift. WK vehicles equipped with a 3.6L engine (Sales Code ERB) ? ECO mode will not retain settings. If ECO mode is turned off, it will turn back on after the ignition is cycled. ? Software to correct a harsh bump feel during a 2-1 downshift. DS vehicles equipped with 3.6L engine (Sales Code ERB) ? Software to correct a harsh bump feel during a 2-1 downshift. ? Software to address a customer?s concern of less than desired shift quality in Four Wheel Drive (4wd) Low mode during medium to heavy acceleration. ? Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles. ? Software improvements to powertrain braking in Tow/Haul mode. ? Software to improve downshift response from a medium to heavy pedal acceleration. ? Driveability improvements at higher altitudes. ? Software to improve acceleration during cruise control operation ? Software to correct a condition where DTC U11C3 - ESM Lost Communication With TCM On D-Pt CAN may have been displayed inste
07-002-152018-11-19. Service bulletin. ENGINE. Idler Pulley Noise During Cold Start This bulletin involves replacing the idler pulley. The customer may describe a loud high frequency noise that happens within 20 seconds of engine startup and lasts about 90 seconds intermittently during a cold engine start, approximately 0 degrees C (32 degrees F) and below.
07-002-15 REV. A2018-09-24. Service bulletin. ENGINE. Idler Pulley Noise During Cold Start This bulletin involves replacing the idler pulley. The customer may describe a loud high frequency noise that happens within 20 seconds of engine startup and lasts about 90 seconds intermittently during a cold engine start, approximately 0 degrees C (32 degrees F) and below.
18-056-162018-06-18. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. These symptoms are broken down by vehicle: 2015 WK 3.0L engine (Sales Code EHD) · ** P0456 - EVAP System Small Leak.** · Enhancements to remote engine start. 2015 WK 5.7L engine (Sales Code EZH) · ** P0456 - EVAP System Small Leak.** · U0140-00 - Lost Communication with Body Control Module (BCM). · Enhancements to improve a slight lag or hesitation during Multi Displacement System (MDS) mode transitions. · Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. 2014 WD 5.7L engine (Sales Code EZH) · Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. 2015 WD 5.7L engine (Sales Code EZH) · ** P0456 - EVAP System Small Leak.** · Enhancements to remote engine start.
18-034-14 REV. A2018-06-18. Service bulletin. ENGINE. P0520- Engine Oil Pressure Sensor Circuit This bulletin involves replacing the oil pressure sensor with a revised part. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0520 - Engine Oil Pressure Sensor Circuit
08-053-14 REV. A2018-06-18. Service bulletin. ENGINE. Flash: Vehicle Enhancement This bulletin involves updating the Body Control Module (BCM) software. The customer may experience one or all of the following: False security alarm activation. A significant delay to update the ambient air temperature display. Intermittently the interior lights may not turn on with the first press of the key fob. Ambient temperature may display - 40 F/-40 C for a few seconds at start up. Courtesy lamps are dim when approaching the vehicle after a remote start. Intermittently the vehicle may not start, after the vehicle has been driven and then trying to restart the vehicle with remote start. Back lighting flickers after a remote start, the condition is gone after entering the vehicle and restarting it. Engine may turn off, after the vehicle is remote started and then unlocking the vehicle with the liftgate passive entry. (Diesel Only) (Diesel Only) False DTC setting for front Daytime Running Lamps (DRL) circuit open, DRL will work properly. False setting for B16D3-15 Right DRL Lamp Control - Circuit Short To Battery Or Open. False setting for B16CF-15 Left DRL Lamp Control - Circuit Short To Battery Or Open.
90036942018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.