WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Chrysler Pacifica

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

700 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
08052222022-09-26. Service bulletin. POWER TRAIN; LANE DEPARTURE; PARKING BRAKE; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; BACK OVER PREVENTION; EXTERIOR LIGHTING. Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates This bulletin involves reprogramming the HCP and AHCP or also known as Power InverterModule (PIM) with the latest available software. Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear.As a result, the vehicles are not eligible to be registered in certain states. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find one or more of the following DTCs have been set: P0A33 - Drive Motor B Temperature Sensor 1 Circuit High. P0A2D - Sensor Power Supply 1 Circuit High. P215B - Vehicle Speed Output Shaft Speed Correlation. P0C4A - Drive Motor A Inverter Over Temperature. P0E15 - Hybrid-Ev Battery Pack Coolant Heater A Control Performance. P1AFE - MCPB Improper Shut Down. P1AF8 - MCPA Control Module Shutdown Performance. P0513 - Invalid Skim Key. U151A-87 - Hybrid Control Processor Secret Code-Missing Message. Customers may also experience more or more of the following: The scheduled charging does not occur on desired schedule. Vehicle does not start when pushing ignition switch with no MIL for DTCs P1AFE and P1AF8 (pending DTCs). Vehicle does not start when pushing ignition switch with DTCs P0513 and U151-A87 (stored or active). Scheduled charging start/end does not align with displayed time (ex: 12:05 pm end time on radio, but charging ends at 12:06 pm). Scheduled charging does not start following a power outage. Scheduled Cabin Conditioning (SCC) feature will not function properly if they schedule the departure time in between 50 minutes to 480 minutesat extreme cold ambient temps below -24 °C (-11 °F). ?Charge Now? soft button does not always work. The vehicle will get a rough engine spin-down, and then ?Service Charging System? warning and shutdown if the vehicle is quicklyre-cranked after the initial key crank.
18050222022-09-26. Service bulletin. BACK OVER PREVENTION; EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves updating the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may notice one or moreof the following Diagnostic Trouble Codes (DTCs) have been set: P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor A. P0345 - Camshaft Position Sensor Circuit - Bank 2 Sensor A. P0365 - Camshaft Position Sensor Circuit - Bank 1 Sensor B. P0390 - Camshaft Position Sensor Circuit - Bank 2 Sensor B.
08026212022-09-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Mopar Overhead Multimedia Player (OMP) Enhancements This bulletin involves updating the OMP with a USB flash drive. The new software is version 2.700. Customers may experience the following:Bluetooth® headphones will not stay paired.
S2008000011RevA2022-09-26. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION. Customer Cannot Change Cluster Display Unit Settings, Turn By Turn Distance Does Not Match The Radios Distance
S2008000188RevB2022-09-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. R1 Radio, Sales Codes UBN, UEN, UBG, UEG, UFN, UFG With DTC?s B1498-13, B1408-13, B140C-13, B1431-00
S21080000312022-09-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Uconnect 5 R1 Clock Time Not Accurate
S21080000282022-07-18. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION. Temperature Setting Will Jump To Full Hot Or Cold On Radio Display
S2008000185 Rev.2022-07-18. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION. Uconnect 5 Voice Recognition Options
S21080000192022-07-18. Service bulletin. BACK OVER PREVENTION. R1H Missing Connectivity Info In The Radio (Found In TBM)
S21080000182022-07-18. Service bulletin. BACK OVER PREVENTION. Interior Camera Module, ICM1, Red On wiTECH Topology
S21080000152022-07-18. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Uconnect Box Requires Service Message
S21080001352022-05-31. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION. MIL Malfunction Indicator Lamp Illuminated, P2067 Fuel Level Sensor 2 Circuit Low
S21080000952021-05-24. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION. Rear Seatback Video Screen Goes Black When Selecting a Game Application
S2008000195 Rev.2021-05-24. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION. Radio Displays Android Recovery Message
S2008000011 Rev.2021-05-24. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION. Customer Cannot Change Cluster Display Unit Settings, Turn By Turn Distance Does Not Match The Radios Distance
90043682021-05-24. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. CAMERA, Interior Prior to replacing the ICM1 (interior camera module) due to the prescence of the STORED DTC B229C-96 "Interior Camera Module - Component Internal Failure" on the 21MY RU or WL and 22MY WS vehicles, verify there are no observable issues with the FamCam feature. If there are no observable issues with the FamCam feature, and no customer complaints related to the FamCam, clear the STORED fault and do not replace the camera. This issue is due to a temperature detection error and will be corrected in a subsequent SW release.
08-051-212021-04-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. UBN, UEN, UBG and UEG Radio Over The Air Software Version Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. Vehicle software will be updated to R16.27. Customers may experience one or more of the following:Radio USB port #2 does not load device information and is for charging only. Voice Recognition (VR) is unable to tune to SXM satellite radio stations.
08-026-21 REV. A2021-04-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Mopar Overhead Multimedia Player (OMP) Enhancements This bulletin involves updating the OMP with a USB flash drive. The new software is version 2.700. Customers may experience the following:Bluetooth® headphones will not stay paired.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.