Service bulletin S2008000188RevB
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10220527 |
| Published by NHTSA | 2022-09-26 |
| Manufacturer's number | S2008000188RevB |
| Manufacturer's date | 2021-02-05 |
| NHTSA component | BACK OVER PREVENTION:SOFTWARE |
NHTSA's summary
R1 Radio, Sales Codes UBN, UEN, UBG, UEG, UFN, UFG With DTC?s B1498-13, B1408-13, B140C-13, B1431-00
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
Trouble codes named
B1408, B140C, B1431, B1498
| CHRYSLER PACIFICA | 2021 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V436000 | 2024-06-13. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| S2208000045 REV.B | 2024-12-11. Service bulletin. Backup Camera Poor Image Quality Inspection |
|---|---|
| 9004452 | 2024-01-08. Service bulletin. CAMERA, Rear View Prior to replacement, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. |
| S2108000015 | 2024-01-02. Service bulletin. Uconnect Box Require Service Message |
| S1408000384 | 2024-01-02. Service bulletin. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On |
| 9003357 | 2024-01-02. Service bulletin. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA. |
| S238A000047 | 2023-12-18. Service bulletin. Humming Noise Through Speakers While Vehicle Is Off |
| 9004452 | 2023-10-30. Service bulletin. CAMERA, Rear View Prior to replacement, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. |
| 9100133 | 2023-07-31. Service bulletin. ROCKER ARM ASSY - ROLLER ROCKER Case 1.- Before replacing the intake or exhaust rocker arms due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head (no need to replace rocker arms). The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. Case 2.- If the INTAKE camshaft or INTAKE rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6). |
| S1623000028 Rev. | 2023-02-13. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position. |
| 1805121 | 2023-01-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1AC6-00 - MCPA Crankshaft Position Signal Sensor Performance. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0031 - O2 Sensor 1/1 Heater Circuit Low. P0032 - O2 Sensor 1/1 Heater Circuit High. P0037 - O2 Sensor 1/2 Heater Circuit Low. P0038 - O2-Sensor 1/2 Heater Circuit High. P0051 - O2-Sensor 2/1 Heater Circuit Low. P0052 - O2-Sensor 2/1 Heater Circuit High. P0057 - O2 Sensor 2/2 Heater Circuit Low. P0058 - O2-Sensor 2/2 Heater Circuit High. The following modules need to be flashed for this update to be effective, the following modules are all to be updated along with this PCM update:Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) or also known as Power Inverter Module (PIM). |