WenmarOpen by Wenmar Pro

Service bulletins for the 2007 Chrysler Pacifica

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

62 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
S1121000006RevA2022-09-26. Service bulletin. POWER TRAIN:TRANSMISSION CASE/HOUSING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. (Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
90040092022-09-26. Service bulletin. POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
S1121000006 Rev.2020-09-28. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. (Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
TSB-J162009-10-07. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). CHRYSLER SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE POWERTRAIN CONTROL MODULE (PCM) ON THE VEHICLES MAY NOT ADEQUATELY CONTROL NITROGEN OXIDE EMISSIONS LEVELS UNDER CERTAIN OPERATING CONDITIONS. THIS MAY CAUSE THE ENGINE TO EMIT NITROGEN OXIDES AT LEVELS WHICH MAY EXCEED CALIFORNIA EMISSIONS STANDARDS. CSC LETTER WAS REC'D. *PE
21016072008-01-10. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FLASH: TORQUE CONVERTER SHUDDER WITH COORDINATED CHANGE. *NJ UPDATED 4/29/08. *NJ
21008072007-06-27. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. HARSH TRANSMISSION ENGAGEMENT OR CLUNK WHEN SHIFTING OUT OF REVERSE OR FROM DRIVE, THROUGH REVERSE INTO PARK. *KB
042007-04-24. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). REPROGRAM PCM. *KB
08030062007-03-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. POWERTRAIN CONTROL MODULE INITIALIZATION. *KB
21002072007-03-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. TORQUE CONVERTER SHUDDER / SHIFT QUALITY IMPROVEMENTS / DTC P0732. *KB UPDATED 08-13-07. *KB UPDATED 01/09/08. *NJ UPDATED 3/7/08. *NJ

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.