WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Chrysler 300

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

202 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Brakes are shown. Show all

Bulletins, newest first
1084632025-11-26. Service bulletin. SERVICE BRAKES. PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
1084642025-11-26. Service bulletin. SERVICE BRAKES. PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
S2208000138RevA2022-12-12. Service bulletin. SERVICE BRAKES. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
90037562022-10-24. Service bulletin. BACK OVER PREVENTION; AIR BAGS; STEERING; PARKING BRAKE; ELECTRICAL SYSTEM. Rain light sensor Rain sense wipers do not operate: 1. Visual Inspection--> Check if the sensor is visually OK. (all the pins are OK) Check that the Connector is NOT loose (Sensor must get a voltage from 9V to 16V) 2. Functional Checks Rain--> Steering column switch is in auto mode (sensor is active) it is necessary to splash water on the sensitive surface of the sensor to trigger wipes. check the same for different sensitivities When the rain sensitivity is increased (for example from level 0 to level 1), as an acknowledgement a single wipe is seen. (This is not a phantom wipe) and this single wipe is not seen when the rain sensitivity is decreased (from higher level to lower level) Light--> Steering column switch is in auto mode (sensor is active) block the light coming on the sensor from outside of the vehicle (use a opaque object), the head lamps should be activated 3. If the sensor seems functional, it is ideal to remove the silicon gel pad from the sensor, replace it with the new silicon gel pad instead of replacing the whole sensor. When servicing the LRSM please replace the silicon gel pad with a new silicon gel pad (PN 68224945AA) instead of replacing the whole sensor.
08061172022-10-17. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE; ELECTRICAL SYSTEM. This bulletin involves updating the ABS module software.
90032932022-08-08. Service bulletin. SERVICE BRAKES. A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.