Service bulletins for the 2016 Chevrolet Volt
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1334 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Fuel system are shown. Show all
| PIP4723C | 2019-04-08. Service bulletin. EQUIPMENT; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update. |
|---|---|
| PIP5518 | 2019-04-08. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE; EQUIPMENT ADAPTIVE/MOBILITY. This Preliminary information communicates to the technician, that they may be working on a concern of a rattle or pop noise during gas engine start. That if no codes or other symptoms are present, do not attempt repairs at this time. To advise the customer that GM Powertrain is aware of this concern and working on a resolution. |
| PIP5472F | 2019-04-08. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician related to vehicles that have a Malfunction Indicator Lamp on. A technician may find Diagnostic Trouble Code P050D set as current or history. The technician is advised to first perform the SI diagnostic. That if the diagnostic fails to isolate the concern, then replace only the exhaust side SHLA's (Stationary Hydraulic Lash Adjuster) and to retest for the concern. |
| PIP5596 | 2018-11-13. Service bulletin. FUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation. |
| 050604022O | 2018-06-04. Service bulletin. FUEL SYSTEM, DIESEL; FUEL SYSTEM, GASOLINE. This informational bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles. |
| PIC6275 | 2018-05-21. Service bulletin. FUEL SYSTEM, GASOLINE; EQUIPMENT; ELECTRICAL SYSTEM. This Preliminary information communicates a posible loss of 12 volt power to the fuel pump drive module. This is to point the dealer at a possible lose terminal in the instrument panel fuse panel |
| 05-06-04-022M | 2018-05-21. Service bulletin. FUEL SYSTEM, GASOLINE. This informational bulletin provides information on TOP TIER Detergent Gasoline and available retail brands. |
| 16-NA-225 | 2018-05-21. Service bulletin. FUEL SYSTEM, GASOLINE; EQUIPMENT. This technical bulletin provides a procedure to replace the fuel pump module assembly if the DTC P2635 and/or P018B are set. |
| 16-NA-383 | 2018-05-21. Service bulletin. EQUIPMENT; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up. |
| 04-06-04-051E | 2018-05-21. Service bulletin. EQUIPMENT; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS. This informational bulletin provides information for maintenance cleaning of the fuel injectors. |
| 04-06-04-051D | 2018-05-21. Service bulletin. EQUIPMENT; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS. This informational bulletin provides information for maintenance cleaning of the fuel injectors. |
| PIP5515A-02 | 2018-05-21. Service bulletin. FUEL SYSTEM, GASOLINE. This Preliminary information communicates to the technician, that if the latest calibration have been installed per 17058 and Service Information for the P2097 fails to isolate the cause, do not attempt repairs at this time. To return the vehicle to the customer and to advise that GM is aware of this concern and working on a resolution. |
| PIP5515A | 2018-05-21. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE. This Preliminary information communicates to the technician, that if the latest calibration have been installed per 17058 and Service Information for the P2097 fails to isolate the cause, do not attempt repairs at this time. To return the vehicle to the customer and to advise that GM is aware of this concern and working on a resolution. |
| GCUS-3-629 | 2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. 40240 - Emission Recall. Vehicles may have out-of-specification crimps on the front under hood flexible fuel feed pipe. Fuel may weep from these connections and the fuel odor may enter the cabin. Dealers to to inspect the fuel feed pipe and manufacture date. If there is indication of weeping or the pipe manufacture date falls into the suspect date range, replace the fuel feed pipe. |
| 050604022N | 2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE. This informational bulletin provides information on the top tier fuels that are recommended in GM vehicles. |
| 040604051D | 2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS. This informational bulletin provides information for maintenance cleaning of the fuel injectors. |
| PIP5325 | 2018-01-22. Service bulletin. FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician to help determine if the vehicle is equipped with factory or aftermarket Compressed Natural Gas, Liquefied Petroleum Gas, or Bi-Fuel Systems. Technician will check for the Vehicle Emission Control Information Label. By using the engine Regular Production Option Code as well as the Vehicle Emission Control Information Label, technician can confirm the vehicle has a factory installed alternative fuel system or who the manufacturer is of the aftermarket fuel system. |
| PIC6275A | 2017-11-14. Service bulletin. ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. This Preliminary information communicates a posible loss of 12 volt power to the fuel pump drive module. This is to point the dealer at a possible lose terminal in the instrument panel fuse panel |
| 05-00-89-072D | 2017-10-15. Service bulletin. FUEL SYSTEM, GASOLINE. This informational Bulletin provides Do's and Don'ts for maximizing gasoline engine fuel economy, other various tips and a list of websites for additional information. |
| PIT4943D | 2017-08-15. Service bulletin. FUEL SYSTEM, GASOLINE; FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay. |
| PIP5163B | 2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, GASOLINE; ENGINE. This Preliminary Information communication provides information to the technician about engine block that have a possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, an out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure. |
| PIP5507B | 2017-08-15. Service bulletin. FUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern. |
| PIP5507A | 2017-08-15. Service bulletin. FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP. This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern. |
| 16-NA-225 | 2017-08-15. Service bulletin. FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP. This technical bulletin provides a procedure to replace the fuel pump module assembly if the DTC P2635 and/or P018B are set. |
| 16-NA-168 | 2017-07-18. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY. This informational bulletin provide a service tip that when servicing the fuel tank and/or replacing the isolator pads, the padding on the new design tank is smaller than the current design and requires the protective caps be installed to the #4 cross bar. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.