WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Chevrolet Volt

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1655 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
17-NA-1572018-05-21. Service bulletin. EQUIPMENT; ENGINE. This informational bulletin explains the difference in oil filters and the possibilities of what may happen using the incorrect filter.
00-06-01-012G2018-05-21. Service bulletin. ENGINE. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
18NA1252018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information for engine oil life monitor operation calculation.
PIP4843K2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication advises the technician that effective November 1st, 2010 the Drive Motor Generator Control Module part number 24266807 and 24279524 will be placed on restriction through the General Motors Technical Assistance Center Has now ended.
060089031E2018-05-21. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
090604026N2018-05-21. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2 9U.S. and Canada
090604015C2018-05-21. Service bulletin. ENGINE. This informational bulletin provides a revision for 09-06-04-015B (Vehicles Sitting Outside on Dealer Lots for Extended Periods with Hard Start/No Start Condition) to add the 2015-2018 model years.
16NA3382018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PI1299A2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. This preliminary informational bulletin provides repair information for repositioning an A/C drain hose for a customer concern of water present on front passenger floor.
15-00-90-0012018-05-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides technicians with diagnostic tips for preventing oil leaks after changing oil and filter.
PIP5232A2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
PIP52322018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
PIP3333C2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent engine misfire and a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0300, P0301, and/or P0304. Technician will need to follow published Service Information diagnostics first. If the Service Information diagnostics do not isolate a cause for this concern, inspect the inside of the fuel rail and/or fuel tank for fuel contamination. f fuel contamination is present, refer to the "Fuel System Cleaning" procedure in Service Information. Dealer will need to advise the customer to only use fuel from high quality high volume Top Tier fuel stations.
13-00-90-0012018-04-23. Service bulletin. ENGINE. This technical bulletin provides information on Engine Oils Used in 2014 Model Year Vehicles
150089005A2018-04-23. Service bulletin. EQUIPMENT; ENGINE. This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
PI0783A2018-04-16. Service bulletin. ENGINE AND ENGINE COOLING. This preliminary bulletin informs the technician that the oil change procedure has changed and it should be reviewed.
PIP5081K2018-03-12. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that may have whistle, scrape or whine type noise while driving that may be more noticeable during regenerative braking. Technician may find this noise emanating from the left side of the drive unit. The tech may also state that the vehicle has a current or history diagnostic trouble code P0A46. The noise may be caused by the drive motor rotor bearing cage separated. Technician should replace the bearing with the new updated part number.
PIP5226B2018-02-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIP5540A2018-02-21. Service bulletin. ENGINE. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
01-06-01-011I2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
00-06-01-026H2017-12-22. Service bulletin. ENGINE. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
PIC5920C2017-12-22. Service bulletin. ELECTRICAL SYSTEM; HYBRID PROPULSION SYSTEM; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that will not charge and Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0AA6 and/ or a P1F0E set on 2011-2013 Volt or a P0DAA on 2014 Volt or Cadillac ELR in the Hybrid Powertrain Control Module 2. Technician will need to inspect the coolant level in the Hybrid/EV Battery Pack. If the coolant is found low follow published Service Information diagnostics. Technician will need to inspect the Hybrid/EV Battery Pack drain plug, located on the battery tray, regardless of fluid level at the Hybrid/EV Battery Pack coolant reservoir. If any moisture is found during the drain plug inspection, contact the General Motors Technical Assistance Center for further assistance. If the coolant level in cooling system is at the proper level and there is no moisture in the battery during the drain plug inspection, and the coolant freeze protection is between -10 and -40 degrees Fahrenheit, then update the Hybrid Powertrain Control Module2 and Battery Energy Control Module with the latest Calibrations in TIS-2-Web. Technician will need to gather all measurements recorded while evaluating Diagnostic Trouble Code P0AA6 and contact the GM Technical Assistance Center for further assistance.
PIC5920B2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; HYBRID PROPULSION SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that will not charge and Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0AA6 and/ or a P1F0E set on 2011-2013 Volt or a P0DAA on 2014 Volt or Cadillac ELR in the Hybrid Powertrain Control Module 2. Technician will need to inspect the coolant level in the Hybrid/EV Battery Pack. If the coolant is found low follow published Service Information diagnostics. Technician will need to inspect the Hybrid/EV Battery Pack drain plug, located on the battery tray, regardless of fluid level at the Hybrid/EV Battery Pack coolant reservoir. If any moisture is found during the drain plug inspection, contact the General Motors Technical Assistance Center for further assistance. If the coolant level in cooling system is at the proper level and there is no moisture in the battery during the drain plug inspection, and the coolant freeze protection is between -10 and -40 degrees Fahrenheit, then update the Hybrid Powertrain Control Module2 and Battery Energy Control Module with the latest Calibrations in TIS-2-Web. Technician will need to gather all measurements recorded while evaluating Diagnostic Trouble Code P0AA6 and contact the GM Technical Assistance Center for further assistance.
PI0961A2017-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This preliminary bulletin provides a procedure to test and replace the coolant level sensor and wiring harness to correct the customers concern of the Service High Voltage Charging System displayed on the DIC.
15-06-123-001A2017-08-31. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides Information on the Use of Stop Leak Additives in the Coolant System and If a dealership or customer installs a stop leak product or any type of additive to the cooling systems the cost to repair the vehicle will be the responsibility of the dealership or customer.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.