WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Chevrolet Malibu

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1345 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
PIP5390G2019-03-18. Service bulletin. POWER TRAIN. This Preliminary Information communication advises the technician that the Malibu 5ET50 Hybrid Transmission and Component has a part restriction program. The dealer will need to call General Motors Technical Assistance Center (Technical Assistance Center) for further assistance.
PIP5540B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5610A2019-03-18. Service bulletin. FUEL SYSTEM, GASOLINE. This Preliminary information communicates the possibility of the high pressure fuel pump roller follower pin walking out and making contact with cylinder head causing the ignition timing to be serverly retarded on acceleration causing lack of power, sluggishness or hesitation on acceleration.
PIP4925B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
PIP5390H2019-03-11. Service bulletin. POWER TRAIN. This Preliminary Information communication advises the technician that the Malibu 5ET50 Hybrid Transmission and Component has a part restriction program that has ended.
PIT4945H2019-03-11. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician being unable to program fobs to the vehicle. Technician will need to ensure the key FOB is a new unit and has not been programmed to another vehicle previously.
PIP5540D2019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP56282019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PIT5444D2019-03-11. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication provides information to the technician about the text messaging feature on some newer General Motors infotainment systems. Pair the iPhone to the system then enter the Bluetooth settings menu, select the ?i? icon next to the vehicle name in the device and enable show notifications. The text messaging feature will be available on the next ignition cycle. However with iPhones text messages cannot be responded to when using the infotainment system, they can only be received. For android devices pair the phone to the system during the pairing process the phone will ask you to allow the vehicle to access the device contacts. A second question will pop up on the device asking to allow the vehicle to access the message access profile. Both have to be allowed for the text messaging feature to work.
PIP5421G2019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that may be running rough with a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P0300 set. Technician will need to perform an Engine Compression Testing in Service Information. If excessive leakage to the crankcase is isolated, check piston and cylinder wall condition. Technician should perform the repair per the level of damage. If the cylinder wall surface has not been compromised, only piston replacement is required.
PIP56232019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted.
PIC5822F2018-12-17. Service bulletin. EQUIPMENT; STRUCTURE. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
PIT5353C2018-12-17. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
PIC6169D2018-12-17. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides the technician with inspection and repair instructions for vehicles with Service Engine Soon lamp when locking, unlocking, going into gear, and when vehicle is running. If service rear camera message on the divers information center, address U-type DTC's stored prior to diagnosing DTC P175F stored in the Transmission Control Module. Technician will inspect connectors X210 and X220 for bent terminals or connection issues. Repair any terminal found damaged.
PIC6265D2018-12-17. Service bulletin. VEHICLE SPEED CONTROL:CRUISE CONTROL; LANE DEPARTURE. This Preliminary information communicates that a vehicle may exhibit a Adaptive Cruise Control Unavailable and/or Lane Keep Assist Unavailable message. The technician may attempt to program the Active Safety Control Module (ASCM) and encounter a code E4399. The technician is advised if he encounters this concern to zero the MIC counter by placing the vehicle into and back out of "Transport Mode".
PIP56102018-12-17. Service bulletin. FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP; EQUIPMENT. This Preliminary information communicates the possibility of the high pressure fuel pump roller follower pin walking out and making contact with cylinder head causing the ignition timing to be serverly retarded on acceleration causing lack of power, sluggishness or hesitation on acceleration.
PIP56092018-12-17. Service bulletin. ENGINE. This Preliminary information communicates to the dealer an issue where the vehicle's service engine soon light may illuminate due to trouble codes P0601-P0604, P0606, P062B, P062F, P0630, P16F3, or P262B . The dealer is to inspect the engine control module's electrical connections and for proper powers and grounds. Dealer instructed to replace the Engine Control Module, if no other issues found.
PIP56012018-11-13. Service bulletin. EQUIPMENT. This Preliminary information communicates
PIP5390F2018-11-13. Service bulletin. POWER TRAIN. This Preliminary Information communication advises the technician that the Malibu 5ET50 Hybrid Transmission and Component has a part restriction program. The dealer will need to call General Motors Technical Assistance Center (Technical Assistance Center) for further assistance.
PIT4945G2018-11-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This Preliminary Information communication provides information to the technician being unable to program fobs to the vehicle. Technician will need to ensure the key FOB is a new unit and has not been programmed to another vehicle previously.
PIT5099D2018-11-13. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIP5534A2018-11-13. Service bulletin. ENGINE. This Preliminary information communicates additional diagnostics to assist the dealer technician with diagnosing and repairing trouble code P2097.
PIP55972018-11-13. Service bulletin. ENGINE; EQUIPMENT:OTHER:LABELS. This Preliminary information communicates to the technician where to find the engine identification tag and what information on that tag to use during programming of someengine control modules.
PIP5320G2018-11-13. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE; ELECTRICAL SYSTEM. This Preliminary Information communication advises the technician that the drive motor generator control module is being placed on restriction through the General Motors Technical Assistance Center. Dealer will need to call General Motors Technical Assistance Center for further assistance.
PIC6161C2018-11-13. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that have unwanted engine flairs while the vehicle is at steady state speed or while the vehicle is slowing. Dealer should communicate to the customer this behavior is a normal operating characteristic of the 5ET50/MKV drive unit.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.