WenmarOpen by Wenmar Pro

Recalls that may apply to the 2000 Chevrolet Lumina

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
00V2280032000-08-07. SEAT BELTS. VEHICLE DESCRIPTION: PASSENGER VEHICLES, LIGHT DUTY TRUCKS, SPORT UTILITY VEHICLES, AND MINI VANS EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." Built 2000-04-01 to 2000-05-31.
00V1600002000-06-16. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE CLAMP THAT SECURES THE FLEXIBLE FUEL FILL HOSE TO THE METAL FILL TUBE MAY BE LOOSE AND COULD SEPARATE. Built 2000-05-01 to 2000-05-31.
00V1430002000-05-17. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM. VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH REAR DRUM BRAKES. THE BOLT HEAD(S) ON THE REAR SPINDLE ROD CAN SEPARATE. Built 1999-11-01 to 2000-02-28.
99V3570001999-12-17. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE RIGHT FRONT BRAKE HOSE IS INCORRECTLY ROUTED BEHIND THE BRAKE PIPE BRACKET RESTRICTING BRAKE HOSE MOVEMENT THAT COULD CAUSE THE HOSE TO EITHER BE CUT BY THE BRACKET OR SEPARATED AT THE CALIPER. Built 1999-11-01 to 1999-11-30.
99V2830001999-10-21. AIR BAGS:FRONTAL. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE PASSENGER SIDE AIR BAG MODULES HAVE AN UNDERSIZED INFLATOR ORIFICE. Built 1999-09-01 to 1999-10-05.
Canada: Transport Canada, as of 2026-10-19
20022342002-12-04. Airbag. On certain vehicles, the passenger air bag was manufactured without a check pin. An air bag without the check pin could produce increased pressure at the onset of the air bag deployment and reduced pressure afterward. This could increase the severity of injury to a person who was not properly restrained and who was close to the passenger air bag at the time of deployment. It could also reduce the ability of the air bag to protect a restrained front seat passenger. Correction: Dealers are to inspect, and if necessary, replace the passenger air bag.
20001962000-09-15. Seats And Restraints. Certain vehicles do not comply with the requirements of C.M.V.S.S. 209 - Seat Belt Assemblies. Vehicles may have seat belt assemblies that will not withstand the force requirements of the standard. In a crash, if the belt buckle fails, there is an increased risk of injury to the occupant. Correction: Suspect buckle assemblies will be replaced.
20001392000-06-20. Fuel System. Certain vehicles do not comply with the requirements of CMVSS 301 - Fuel System Integrity. The clamp that secures the flexible fuel fill hose to the metal fuel fill tube may be loose and could separate in a crash or rollover. In the presence of an ignition source, a fire could result. Correction: Fuel hose fill neck clamp will be inspected and if necessary, the clamp will be repositioned and tightened.
20001242000-05-31. Brakes. Certain vehicles equipped with rear drum brakes may exhibit a condition in which the bolt head(s) on the rear spindle rod may separate. There may be a noticeable rattle in the rear suspension. If the remaining portion of the bolt breaks, the wheel can shift, causing rear steering of the vehicle. This could cause the driver to lose control and a crash could occur without prior warning. Correction: Dealers will replace the rear spindle rod bolts on affected vehicles.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.