WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Chevrolet Equinox

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1696 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
19NA1042020-04-06. Service bulletin. EQUIPMENT; STRUCTURE:BODY; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
18NA3582019-11-25. Service bulletin. STRUCTURE. This technical bulletin provides a procedure to replace the upper and lower valve body housings to correct the customer concern of launch shudder.
99-08-51-001D2018-06-11. Service bulletin. STRUCTURE; EQUIPMENT. Thins informational bulletin provides information on Paint-less Dent Repair Process.
060089026N2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
11-00-89-007C2018-06-04. Service bulletin. STRUCTURE:BODY; EQUIPMENT. This informational bulletin is a revision for 11-00-89-007B to add the 2014 model year and update the Labor Operation List.
01-08-51-003E2018-05-21. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. This informational bulletin provides recommendations and product information for application of anti-corrosion materials
PI11862018-05-21. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE:HINGE AND ATTACHMENTS; EQUIPMENT. This preliminary bulletin provides a procedure to install new liftgate struts to correct the customers concern of the liftgate sagging, causing the gate to close from the open position.
PI13142018-05-21. Service bulletin. EQUIPMENT:MECHANICAL; STRUCTURE. This preliminary bulletin provides a procedure to tighten the cradle bolts or to install rivits to the frame rail to correct the customers concern of the right front floor poppin or creaking during slow speed maneuvers.
06-08-64-001D2018-05-21. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE:BODY:DOOR. This Informational bulletin describes warranty part reviews where door glass had chips or scratches.
PI0281G2018-05-21. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
PI1043C2018-05-21. Service bulletin. STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS. This preliminary informational bulletin adds the 2016 model year to information to correct a customer concern on opening hood when hood primary latch release cable is inoperative.
PI1314A2018-05-21. Service bulletin. STRUCTURE:BODY. This preliminary informational bulletin provides repair information to correct a customer concern of a front body creak/pop type noise (located in the front passenger foot well area) noticed when turning the steering wheel when the vehicle is stationary or during slow speed maneuvers.
PI10102018-04-23. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. This preliminary informational bulletin provides information for Round Dark Stains on Roof Paint Center Rear Area.
PIT4994E2018-01-22. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE. This Preliminary Information communication provides information to the technician about vehicle that have a rattle noise from the rear lift gate on rough roads. Technician will need to inspect the lift gate wedges by opening the lift gate, insert paper between the body side & lift-gate side wedges, and then close the lift gate. If the paper cannot be removed, grease lift-gate side wedges. If the paper can be removed, reset the wedges by loosen lift-gate side wedge center screw to allow center portion to "ratchet" along internal detents freely, pull center adjustment portion of lift-gate side wedges to full downward position, close lift-gate to full latch engagement then use power to close lift-gate system (if available), close manually on non-power lift gates and do not slam, open lift gate, and pull the center adjustment portion down one additional detent & torque screw 5.0 newton meters if wedge adjustment does not have enough travel for the one additional detent add washer under the two lift-gate side wedge attachments to shim as required. Now to inspect the lift gate wedges by opening the lift gate, insert paper between the body side & lift-gate side wedges, and then close the lift gate. If the paper cannot be removed, grease lift-gate side wedges. If the concern is still present adjust lift-gate latch striker.
02-07-30-029Y2017-12-22. Service bulletin. STRUCTURE. This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
PIT52962017-12-22. Service bulletin. EQUIPMENT; STRUCTURE. This Preliminary Information communication provides information to the technician about vehicles that may have a right front creak or pop type noise during slow speed body twist driving maneuvers. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
PIP4495E2017-11-14. Service bulletin. STRUCTURE:BODY:HOOD. This Preliminary Information communication provides information to the technician about vehicles that have a loud tick or rattle noise under the hood at all operating conditions. Technician will need to check the lower and oil pressure to the upper end oil pressure. Technician will need to inspect the oil feed orifice in the cylinder head. Technician will clean out and debris found in the orifice.
PIP53382017-08-15. Service bulletin. SUSPENSION; STRUCTURE:FRAME AND MEMBERS. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
PIT4916E2017-08-15. Service bulletin. STRUCTURE:BODY:DOOR; VISIBILITY:GLASS, SIDE/REAR. This Preliminary Information communication provides information to the technician about vehicles that have may a helicopter type noise when a rear window is lowered. This is a normal characteristic of this vehicle, but the concern can be minimized by lowering a front door glass approximately 1 to 2 inches.
PI1023A2017-08-15. Service bulletin. STRUCTURE; SEATS. This preliminary information bulletin provides information for the customer on the elimination of the rear seat floor filler trim panel not being standard equipment.
PI10432017-08-15. Service bulletin. LATCHES/LOCKS/LINKAGES:HOOD:LATCH; STRUCTURE:BODY:HOOD. This preliminary information bulletin provides information on opening the hood when the primary latch release cable is inoperative.
PIT4994D2017-08-15. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE:HINGE AND ATTACHMENTS; STRUCTURE:BODY:HATCHBACK/LIFTGATE; STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT. This Preliminary Information communication provides information to the technician about vehicles that have a rattle noise from the rear lift gate on rough roads. Technician will need to inspect the lift gate wedges by opening the lift gate, insert paper between the body side & lift-gate side wedges, and then close the lift gate. If the paper cannot be removed, grease lift-gate side wedges. If the paper can be removed, reset the wedges by loosen lift-gate side wedge center screw to allow center portion to "ratchet" along internal detents freely, pull center adjustment portion of lift-gate side wedges to full downward position, close lift-gate to full latch engagement then use power to close lift-gate system (if available), close manually on non-power lift gates and do not slam, open lift gate, and pull the center adjustment portion down one additional detent & torque screw 5.0 newton meters if wedge adjustment does not have enough travel for the one additional detent add washer under the two lift-gate side wedge attachments to shim as required. Now to inspect the lift gate wedges by opening the lift gate, insert paper between the body side & lift-gate side wedges, and then close the lift gate. If the paper cannot be removed, grease lift-gate side wedges. If the concern is still present adjust lift-gate latch striker.
PI1358A2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. This preliminary informational bulletin provides a procedure to install retainers to the carpet to correct a condition of the carpet pulling loose from under driver side body hinge pillar trim panel
05-08-51-001H2017-08-15. Service bulletin. STRUCTURE:BODY. This informational bulletin provides information on removing paint stains on the under side of protective shipping film
PIT53052017-08-15. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; STRUCTURE. This Preliminary Information communication provides information to the technician about vehicles that may have water dripping in the driver's side foot well from the inboard side and/or driver may notice slight mildew odor. Technician should check for a void on the driver side Heater-Vent-Air Conditioning lower blower case. If a void is found the Heater-Vent-Air Conditioning lower blower case will need to be replaced.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.