WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Chevrolet Cruze

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1331 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
090604026N2018-05-21. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2 9U.S. and Canada
090604015C2018-05-21. Service bulletin. ENGINE. This informational bulletin provides a revision for 09-06-04-015B (Vehicles Sitting Outside on Dealer Lots for Extended Periods with Hard Start/No Start Condition) to add the 2015-2018 model years.
18NA0332018-05-21. Service bulletin. EQUIPMENT; ENGINE. This bulletin provides information for the low oil pressure light on at a idle in which may be caused by oil pressure being bled off due to debris in the oil drain check valve and/or a smashed oil filter.
18NA0732018-05-21. Service bulletin. ENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Bulletin provides graphics, information and guidelines for engine component wear that require repair and not engine replacement.
16NA3382018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PIP5197G2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; ENGINE. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that have excessive oil consumption, blue smoke from the exhaust, or a Malfunction Indicator Lamp. Technician should inspect the PVC orifice for leaking oil or drawing a vacuum at idle. If the PCV orifice external port is leaking oil or vacuum, replace the camshaft cover assembly. Technician will inspect for a missing intake manifold Non Return Valve that may have damaged the PCV orifice diaphragm. Check for the return valve if it is not visible use a long cotton swab to wipe any excess oil from the valve to validate. If the non return valve is still not visible, then intake manifold removal for inspection is required to validate. When the valve is present reinstall the intake manifold. When the valve is not present replace the intake manifold assembly.
PIP5490D2018-05-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that may be running rough with a Malfunction Indicator Lamp on. The technician may find Diagnostic Trouble Code P0300 set. The technician will need to perform engine compression and leakage Testing in Service Information. If excessive leakage to the crankcase is isolated, the technicain is directed to check the condition of all cylinder walls.If the cylinder wall surface has not been damaged, the technician is directed to replace all four pistons.
150089005A2018-04-23. Service bulletin. EQUIPMENT; ENGINE. This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
GCUS-9-30402018-04-02. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. 16018 - Special Coverage. A diagnostic trouble code P24AE, P24AF, P24C6 or P24C7 may set on some of these vehicles as a result of exhaust particulate sensor failure caused by either sensor contamination or sensor damage from humidity in the exhaust. If this condition occurs within the stated terms, dealer will replace the exhaust particulate sensor.
GCUS-3-7082018-04-02. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. 16008 - Emission Recall. The ?Jiffy-Tite? fitting on the turbocharger oil feed pipe may not have been tightened to the specified torque. A fitting not tightened to specification may result in an engine oil leak. Continued driving with an oil leak at this location may result in low oil pressure and illumination of the malfunction indicator lamp. Dealers will inspect and replace the turbocharger oil feed pipe fitting.
PIP5226B2018-02-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIP5540A2018-02-21. Service bulletin. ENGINE. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP53292018-01-22. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P0341 and or P0366 set. If the technician has duplicated the concern replace the related Camshaft Position sensor and retest for the code. If the Diagnostic Trouble Code returns technician should check the history to see if the vehicle was in a collision. If the vehicle has been in a collision technician should call General Motors Technical Assistance Center.
PIP5472C2018-01-16. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This Preliminary Information communication provides information to the technician related to vehicles that have a Malfunction Indicator Lamp on. A technician may find Diagnostic Trouble Code P050D set as current or history. The technician is advised that if the engine misfires during very specific cold start conditions, to replace only the exhaust side SHLA's (Stationary Hydraulic Lash Adjuster) and to retest for the concern.
PIP5417B2018-01-16. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE. This Preliminary Information communication provides information to the technician related to utilizing crankcase pressure testing to aid in engine oil leak diagnostics. The technician is directed to perform the testing and to check related components based on the results.
01-06-01-011I2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
PI0653C2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. This preliminary informational bulletin provides dealership personnel with policies and procedures regarding damaged, disassembled or improperly packaged turbochargers returned to Warranty Part Center.
17-NA-1842017-12-22. Service bulletin. ENGINE. This informational bulletin provides information for dealers and technicians about the 1.4L turbocharged engine use two different suppliers for the oil filter housing which results in two different filters being used.
00-06-01-026H2017-12-22. Service bulletin. ENGINE. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
GCUS-3-5632017-12-22. Service bulletin. ENGINE. 46000 - Customer Satisfaction Program. Certain 2016 Chevrolet Cruze vehicles may have a loose connection at the battery negative terminal to ground stud. This condition may cause the engine to stall while driving, may prevent the vehicle from being started, or may illuminate the service engine soon light. Dealers will add a washer to the negative ground.
PIP5418A2017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. This Preliminary Information is to assist in the isolation of a rattle noise from the turbocharger wastegate actuator rod.
PIP5517A2017-11-14. Service bulletin. ENGINE. This Preliminary information communicates the following to the dealer. If an engine oil leak has been isolated to the front crankshaft seal, check for misfires low engine compression and/or cylinder leakage readings. These issues could cause excessive positive crankcase pressure leading to engine oil leaks.
PI0653D2017-10-15. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. This preliminary informational bulletin was created to inform Service Agents or Dealers, they may be charged back for parts and labor due to the turbo-chargers are being returned to the Warranty Parts center damaged, improperly assembled or missing parts and advising to properly package the complete turbochargers. (New models and RPOs added)
PI0851B2017-08-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; FUEL SYSTEM, GASOLINE. This preliminary informational bulletin provides information on Turbocharger Oil Feed and Return Line Inspection When Servicing Turbocharger Assembly
PIP5417A2017-08-31. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician related to utilizing crankcase pressure testing to aid in engine oil leak diagnostics. The technician is directed to perform the testing and to check related components based on the results.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.