WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Cadillac XT5

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

778 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
060847001N2019-03-25. Service bulletin. ELECTRICAL SYSTEM. This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
060089026O2019-03-25. Service bulletin. EQUIPMENT. This warranty bulletin provides labor operation numbers for customer concerns Not duplicated (CCND).
010842001L2019-03-25. Service bulletin. EXTERIOR LIGHTING. This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
000310003X2019-03-25. Service bulletin. TIRES. This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
17NA1532019-03-25. Service bulletin. LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK. This informational bulletin provides information and operating tips for the hands free lift gate.
17NA0662019-03-25. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
17NA0732019-03-18. Service bulletin. EQUIPMENT. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
16NA3382019-03-18. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
16NA0452019-03-18. Service bulletin. SUSPENSION:REAR:SHOCK ABSORBER. This technical bulletin provides repair information to correct a dealership technician concern of bent rear shock locator pin(s) noticed during rear shock absorber replacement.
100089005H2019-03-18. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
080089014D2019-03-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
040089015T2019-03-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provides policy information on required operating procedures.
030603004X2019-03-18. Service bulletin. EQUIPMENT:ELECTRICAL. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
010089010M2019-03-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
PIC5650F2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIP5545B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates a possible noise from the water pump causing a DTC and the diagnostics for the repair.
17NA2712019-03-18. Service bulletin. WHEELS. This bulletin provides a procedure to clean the back side of the rims and rotors and to correct the customers concern of wheel clicking.
PIC5494J2019-03-11. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician when the customer comments that their digital vehicle speed display is showing a different speed than the analog vehicle speed display. There may be up to 2 miles per hour difference between the digital and analog vehicle speed displays. This is a normal condition due to the calculation tolerances being different for the two driver viewing angles for the analog speedometer; it may also appear to increase the difference between both displays. No part replacement is required as this is a normal operating characteristic of the vehicle. For CTS vehicles built between April and June of 2011 or the 2013 ATS, SRX, XTS built before August 29 2012 may have a 3 mile per hour or more variation. The technician is to replace the instrument panel cluster for this concern.
PIC6048J2018-12-17. Service bulletin. LANE DEPARTURE; SEATS. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in).
PIP5568C2018-12-17. Service bulletin. ENGINE. This Preliminary information communicates there is an investigation into cause and correction for this group of DTC's setting together. (P0011, P0014, P0021, P0024). Revised to include the possibility of setting in pairs and some drivability concerns.
PIC6086E2018-11-26. Service bulletin. VISIBILITY; VISIBILITY:WINDSHIELD. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
PIC6180A2018-11-13. Service bulletin. SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER; SEATS. This Preliminary Information communication provides information to the technician with diagnostic tips for auto heated and ventilated seat operation. The auto thermal seats function activates seat heating or ventilation based on outside air temperature and the cabin air temperature control error. The cabin air temperature control error is the difference between cabin air target temperature and actual cabin air temperature.
PIP5486F2018-11-13. Service bulletin. ENGINE. This Preliminary information communicates possible concerns and a diagnostic strategy to locate and repair various noises within the engine as well as some misfire causes.
PIP55972018-11-13. Service bulletin. ENGINE; EQUIPMENT:OTHER:LABELS. This Preliminary information communicates to the technician where to find the engine identification tag and what information on that tag to use during programming of someengine control modules.
PIC5779J2018-09-17. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.