Service bulletins for the 2015 Cadillac Escalade
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
2518 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| GCUS-9-1091 | 2018-05-07. Service bulletin. ELECTRICAL SYSTEM. 15038 - Dealer Message Only - Not a Field Action. Select 2015 model year vehicles will receive a software download via OnStar® to update the software for the Electronic Climate Control (ECC) system. This over-the-air update is being piloted on a few hundred customer vehicles in the mid-October thru mid-December timeframe. Pending the successful completion of the pilot, rollout to the general vehicle population will begin in January 2016. |
|---|---|
| GCUS-3-314 | 2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. 15638 - Customer Satisfaction Program. Certain 2016 model year Cadillac Escalade, Escalade ESV, Chevrolet Corvette, GMC Yukon Denali and 2015 Cadillac Escalade ESV, Chevrolet Silverado LD, GMC Sierra LD, and Yukon Denali XL model vehicles equipped with 6.2L engines (RPO L86 and LT1) may have engines built with cylinder head gaskets in which the head gasket stopper ring was off location. The gasket may fatigue over time leading to the possibility of a leak into the combustion chamber after several thousand miles. Possible symptoms include: a check engine light for P0300 Misfire, possible combustion gas leaks to coolant resulting in overheating, over-flowed coolant bottle, milky-colored engine oil in the crankcase, piston scuffing and if the vehicle is continued to be driven in this condition, engine failure. Dealers are to replace the left and right side engine head gasket. |
| GCUS-3-311 | 2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. 15396B - Service Update (Parts Information revised). This bulletin provides a service procedure to install the original design temperature-sensor wiring harness to the valve body on certain 2015 model year Cadillac Escalade and Escalade ESV; Chevrolet Silverado; and GMC Sierra, Yukon, and Yukon XL vehicles, equipped with a 6.2L engine (L86) and 8-speed automatic transmission (M5U). The supplier of the transmission-wiring harness introduced an unapproved change to the temperature sensor (thermistor), resulting in incorrect oil-temperature readings during transition from cold to warm temperatures. This could cause a harsh shift when starting the vehicle at temperatures below 32ºF (0ºC); however, shift quality improves once the transmission oil warms up. |
| 17336 02 (Bullet | 2018-05-07. Service bulletin. POWER TRAIN. 17336 02 - Special Coverage (Parts and Service Procedure Revised). On some vehicles, may have a condition where thermal cycling on the combination transmission fluid/oil and AC condenser cooler creates a crack that may allow refrigerant to escape. This condition consequently may deactivate the AC system which may cause potential customer annoyance. Dealers are to inspect the air conditioning condenser and replace if necessary. The repairs will be made at no charge to the customer. |
| 070849020M | 2018-04-23. Service bulletin. EQUIPMENT. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
| 17NA335 | 2018-04-23. Service bulletin. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. This technical bulletin provides a procedure to replace the fuel pump to correct the MIL concerns. |
| 150089005A | 2018-04-23. Service bulletin. EQUIPMENT; ENGINE. This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only). |
| 150089004B | 2018-04-23. Service bulletin. EQUIPMENT. This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage. |
| 140089004D | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM:IGNITION; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE. The information in this bulletin details the proper configurations for the ignition key, fob, key tags, key rings, key ring sizes and applying a QR code sticker or barcode sticker to a key fob. |
| 16-NA-107 | 2018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This technical bulletin provides a procedure to reprogram the radio to correct a customer concern of radio Inoperative, blue Screen, AM clipping noise, HD on/off status not retained in stations, time lag on transitions, no audio with internal amp, and park assist symbol position wrong in rear view camera. |
| 12-08-132-001D | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM. This informational bulletin provides warranty information on accessory power outlet and trailer lighting fuse replacement. |
| 16-NA-119 | 2018-04-23. Service bulletin. EQUIPMENT. This warranty administration bulletin provides information on GM?s policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada. |
| GCUS-3-823 | 2018-04-02. Service bulletin. SEATS:FRONT ASSEMBLY:POWER ADJUST. 17018-Customer Satisfaction Program. Certain vehicles, equipped with power front passenger seat adjuster that was previously replaced, may have a condition in which the front passenger seat can be adjusted to a position beyond the occupant design travel range. Dealers will inspect front passenger seat tracks and, as necessary, install the seat stop(s). |
| PIP5555A | 2018-03-12. Service bulletin. ENGINE. This Preliminary information communicatesA vehicle has DTC P06DD setting. (This PI applies to vehicles that have either an original or replacement oil pump).The oil pump control solenoid may be damaged or broke. |
| PIP5555 | 2018-03-12. Service bulletin. ENGINE. This Preliminary information communicatesA vehicle has DTC P06DD setting. (This PI applies to vehicles that have either an original or replacement oil pump).The oil pump control solenoid may be damaged or broke . |
| PIT5552B | 2018-03-12. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communicates repair information for therear vision camera or surround vision camera image being: - Yellow - Blurry -Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message |
| PIT5049D | 2018-03-12. Service bulletin. SUSPENSION:REAR:SHOCK ABSORBER; SUSPENSION:FRONT:SHOCK ABSORBER. This Preliminary Information communication provides information to the technician on the steps to help diagnose and repair vehicles with a rattle, squeak, clunk, thump, or bump. If published Service Information diagnostics do not lead to a repair for the concern. Technician should inspect the opposite side shock/strut for the cause of the concern. |
| PIT5287D | 2018-03-12. Service bulletin. ELECTRICAL SYSTEM; SUSPENSION:FRONT:SHOCK ABSORBER. This Preliminary Information communication provides information to the technician with the correct way to remove the front shock electrical connector terminals. Technician will need to slightly bend the end of the J-38125-12A release tool. There is a purple Terminal Position Assurance that will align itself in the release position when the release tool is inserted into the release hole. There is a metal locking tab on the terminal that will need to be pushed in before the terminal will pull out of the connector. |
| PIP5395D | 2018-03-12. Service bulletin. FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced. |
| PIP5554 | 2018-03-12. Service bulletin. ENGINE. This Preliminary information communicatesP0016 setting after internal engire repair. The engine Base timing is not being set correctly. The information in this PI will be helpful in setting the timing in the vehicle. |
| PIP4670E | 2018-03-12. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles. |
| PIC5891E | 2018-02-21. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that the voice recognition is inoperative. Technician will need to toggle through all languages then back to the desired language. |
| PIP5226B | 2018-02-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings. |
| PIP4138Q | 2018-02-21. Service bulletin. EXTERIOR LIGHTING. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter. |
| PIP5498F | 2018-02-21. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicatesA vehicle may have a concern ofDTCP050D settingalongwith a P0300 after a cold start up. White smoke and/or coolant odor may come from exhaust for an extended period of time at cold start as well. CauseCoolant getting into the cylinders, and provides direction for the repair. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.