WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Cadillac ELR

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1633 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Wiring and fuses are shown. Show all

Bulletins, newest first
1300890082023-12-11. Service bulletin. ELECTRICAL SYSTEM:WIRING. GM Wiring Repair Strategy Information
PIC6495A2023-05-15. Service bulletin. ELECTRICAL SYSTEM:WIRING. This Preliminary information communicates that the New battery section as a broken wiring harness clip, and to use a Velcor strip to hold the harness in place.
100089005G2019-05-13. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
100089005H2019-03-18. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
10-00-89-005C2018-06-04. Service bulletin. ELECTRICAL SYSTEM:WIRING; EQUIPMENT. This informational bulletin is a revision for 10-00-89-005B to add the 2014 model year and labor codes.
10-00-89-005E2018-05-21. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.
13-00-89-008A2018-05-07. Service bulletin. ELECTRICAL SYSTEM:WIRING. This informational bulletin communicates GM wiring repair strategy information.
13-00-89-0082018-04-02. Service bulletin. ELECTRICAL SYSTEM:WIRING. This informational bulletin provides information for GM wiring repair.
100089005D2017-12-22. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty informational bulletin advised the technician that when performing a wiring repair, more information is required.
10-00-89-005F2017-10-05. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:WIRING. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
PI13472017-08-15. Service bulletin. ELECTRICAL SYSTEM:WIRING. This prelimenary bulletin provides a procedure to repair a broken wire at the drivers seat haptic motor to correct the custmers concern of the lane departure defaults back to audible sounds and DTCs set.
13-00-89-008A2017-08-15. Service bulletin. ELECTRICAL SYSTEM:WIRING. This informational bulletin communicates GM wiring repair strategy information.
PIC59882017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:WIRING; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicle that may have the following Diagnostic Trouble Codes U0401, U0140, P15F6, P1E00, U0100, P0562, P1553, P0AC4, C0110, C0898, P1EFC, P257F, P150D, P150E, C0899, U1860, U0293, C0196, P069E, U2608, U0101, U186B, P1ADE, P1AE0, P1E19, U0073, P1EDD, U0417, U184D, U1858, and C12E0 set as Passed /Failed. Technician will need to contact General Motors Technical Assistance Center for further assistance.
PIP4905C2017-08-15. Service bulletin. ELECTRICAL SYSTEM:WIRING; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have a no charge condition when using either the stationary 240V or the 120V charger. Technician may find Diagnostic Trouble Code P0D26 set in the Hybrid Powertrain Control Module 2. Technician will need to check the last 8 digits of the (VIN) Vehicle Identification Number. If the Vehicle Identification Number number is less than Vehicle Identification Number BU100954, perform the latest version of PIP4875 to program the Hybrid Powertrain Control Module 2. If the vehicle is a return or built after Vehicle Identification Number BU100954 Plug in the 120V charger and note the behavior of the charge indicator light on the Instrument Panel and the lights on the charge cord set Electric Vehicle Supply Equipment. If the light on the Instrument Panel is not steady green during a charging event, and the two upper charge cord set lights are steady green, record a GDS 2 snapshot from the Battery Charger Control Module Data. While monitoring the data in Global Diagnostic System 2, manipulate the charge cord coupler for proximity voltage changes. If the data has an erratic signal inspect the charge port receptacle connector for signs of water intrusion or corrosion in both the vehicle harness side and charge port side.
10-00-89-005F2017-07-18. Service bulletin. ELECTRICAL SYSTEM:WIRING. This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.