WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Cadillac ELR

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1633 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
15-06-123-001C2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin advises the possible concerns that can happen when using a stop leak additive in the cooling system.
12-07-30-001D2018-05-21. Service bulletin. POWER TRAIN; ENGINE. This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.
02-07-30-029W2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.
PI12372018-05-21. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. This preliminary was created to inform the technician of a possible camshaft position exticer wheel not properly installed, if the engine was just previously repaired,and procedure on how to use the special tool to install the exciter wheels properly.
02-07-30-029V2018-05-21. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING; EQUIPMENT. This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.
PI1041B2018-05-21. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING:COOLING SYSTEM. This preliminary bulletin provides information on diagnosing a water pump for what is considered a leak and replace the pump correctly.
00-06-01-012E2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
PIP5163C2018-05-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
17-NA-1572018-05-21. Service bulletin. EQUIPMENT; ENGINE. This informational bulletin explains the difference in oil filters and the possibilities of what may happen using the incorrect filter.
00-06-01-012G2018-05-21. Service bulletin. ENGINE. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
18NA1252018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information for engine oil life monitor operation calculation.
PIP4843K2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication advises the technician that effective November 1st, 2010 the Drive Motor Generator Control Module part number 24266807 and 24279524 will be placed on restriction through the General Motors Technical Assistance Center Has now ended.
060089031E2018-05-21. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
090604026N2018-05-21. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2 9U.S. and Canada
090604015C2018-05-21. Service bulletin. ENGINE. This informational bulletin provides a revision for 09-06-04-015B (Vehicles Sitting Outside on Dealer Lots for Extended Periods with Hard Start/No Start Condition) to add the 2015-2018 model years.
16NA3382018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
PI1299A2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. This preliminary informational bulletin provides repair information for repositioning an A/C drain hose for a customer concern of water present on front passenger floor.
15-00-90-0012018-05-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides technicians with diagnostic tips for preventing oil leaks after changing oil and filter.
PIP52412018-05-07. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about improper engine block cleaning during engine block service could lead to lines in the block deck surface that may be mistaken for cracks. Technician using improper block deck cleaning methods may see lines in the block deck surface. These lines are the result of using abrasive pad bristle devices to clean the gasket surface of the engine components. Technician should use the latest version of bulletin 00-06-01-012 for complete details on the use of these devices.
PIP5232A2018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
PIP52322018-05-07. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
PIP3333C2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent engine misfire and a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0300, P0301, and/or P0304. Technician will need to follow published Service Information diagnostics first. If the Service Information diagnostics do not isolate a cause for this concern, inspect the inside of the fuel rail and/or fuel tank for fuel contamination. f fuel contamination is present, refer to the "Fuel System Cleaning" procedure in Service Information. Dealer will need to advise the customer to only use fuel from high quality high volume Top Tier fuel stations.
13-00-90-0012018-04-23. Service bulletin. ENGINE. This technical bulletin provides information on Engine Oils Used in 2014 Model Year Vehicles
150089005A2018-04-23. Service bulletin. EQUIPMENT; ENGINE. This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
PIP5081K2018-03-12. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that may have whistle, scrape or whine type noise while driving that may be more noticeable during regenerative braking. Technician may find this noise emanating from the left side of the drive unit. The tech may also state that the vehicle has a current or history diagnostic trouble code P0A46. The noise may be caused by the drive motor rotor bearing cage separated. Technician should replace the bearing with the new updated part number.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.