Service bulletins for the 2017 Cadillac CTS
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1396 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Body and frame are shown. Show all
| 19NA096 | 2019-07-01. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. This technical bulletin provides repair information to correct a customer concern of hearing clicking, popping, tapping, creaking, flexing, rubbing or rattle noises from roof area during turns or driving over uneven pavement. |
|---|---|
| 18NA362 | 2019-03-25. Service bulletin. VISIBILITY:WINDSHIELD; STRUCTURE. This technical bulletin provides repair information to correct a customer concern of a wind noise and/or water leak at front roof or windshield, water running down interior A-pillar. |
| 99-08-51-001D | 2018-06-11. Service bulletin. STRUCTURE; EQUIPMENT. Thins informational bulletin provides information on Paint-less Dent Repair Process. |
| 060089026N | 2018-06-04. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:DOOR; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); VISIBILITY:WINDSHIELD; ELECTRONIC STABILITY CONTROL (ESC). This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated. |
| 06-08-64-001D | 2018-05-21. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE:BODY:DOOR. This Informational bulletin describes warranty part reviews where door glass had chips or scratches. |
| 18NA128 | 2018-05-21. Service bulletin. STRUCTURE:BODY:HOOD. This technical bulletin provides a procedure on painting the chipped hood vent to correct a condition of Hood Vent Paint Chipping and/or Peeling and adding spacers to prevent it happening again due to the vent being installed to tightly. |
| PI0281G | 2018-05-21. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. |
| GCUS-3-780 | 2017-12-22. Service bulletin. STRUCTURE; SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER. 16129 Service Update. Certain vehicles, equipped with heated seat systems, may have a condition in which the heat output level (Hi/Med/Low) does not match what is illuminated on the display and the customer does not receive the selected heated seat level. Dealers will reprogram the body control module. |
| PIP5395C | 2017-11-14. Service bulletin. EQUIPMENT; STRUCTURE. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced. |
| PIC-5779-G | 2016-08-26. Service bulletin. STRUCTURE; EQUIPMENT. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH INFORMATION ON THE PROPER WASHING OF THE BRIGHT ALUMINUM MOLDINGS TO AVOID THE MOLDINGS FROM GETTING DAMAGED. IT IS RECOMMENDED THAT A NON-ALKALINE SOLUTION BE USED FOR PREPARATION & WASHING OF THE BRIGHT ALUMINUM MOLDINGS. |
| PI-0281-E | 2016-08-06. Service bulletin. EQUIPMENT; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES INFORMATION THAT MAY BE HELPFUL WHEN ADDRESSING UNDERBODY COMPONENT CORROSION WITH CUSTOMERS. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.