WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Cadillac CTS

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1797 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
16NA1092021-05-03. Service bulletin. STEERING. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
PI0281D2021-04-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
PI0281D2021-04-26. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS; EQUIPMENT ADAPTIVE/MOBILITY. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
99-08-51-007F2021-04-26. Service bulletin. EQUIPMENT; WHEELS; EQUIPMENT ADAPTIVE/MOBILITY. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.
99-08-51-007F2021-04-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; WHEELS; EQUIPMENT. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.
PI1448B2021-04-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS; POWER TRAIN:MANUAL TRANSMISSION:COLUMN SHIFT ASSEMBLY; POWER TRAIN:MANUAL TRANSMISSION:FLOOR SHIFT ASSEMBLY. Service Transmission Light Flashing and/or Malfunction Indicator Lamp (MIL) On and DTC P0705 Set Some customers may comment on a malfunction indicator lamp (MIL) on or that the Service Transmission light is flashing. Customers may also comment that the shifter does not seem to shift correctly into each range. The technician may find DTC P0705 set or in history in the TCM
PI1187C2021-04-21. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:CAMERA/SENSOR. Information on Inside Rear View Mirror and Camera Loose Some customers may comment that the inside rear view mirror or front camera is loose or that the mirror/camera mounting bracket is loose or has fallen off. If a vehicle is encountered with the above condition, do not attempt to reinstall the bracket onto the windshield. The above listed vehicles have a revised bracket design that is not serviceable. It is necessary to replace the windshield glass assembly. The bracket comes installed on the new glass assembly. Refer to Windshield Replacement in SI.
07-08-49-020J2021-04-20. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.
06-00-89-031D2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
15-NA-0832021-04-20. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Recovery Process from a Controller Reprogramming Interruption During service reprogramming of the T87 TCM, some technicians may notice the TCM may fail during the reprogramming event and become unresponsive to the Service Programming System (SPS), unresponsive to the GDS2 tool. This bulletin addresses corrective actions to attempt to recover the module before declaring the TCM as a bad part and replacing. During reprogramming, an interruption can cause the module to lock up. A module reset may recover the TCM
PIP5163E2021-04-19. Service bulletin. FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
PIC5260D2021-04-19. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
PIP5540G2021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5725A2021-04-19. Service bulletin. EQUIPMENT. This Preliminary information communicates the use of Winter grade fuel during the warm months of 2020 and the potential rivability issues that it can cause. The ongoing Coronavirus (COVID-19) pandemic has caused significant reductions in driving and fuel use. Due to the surplus of winter grade fuel sitting in storage (pipelines/stations) the EPA is waiving the fuel vapor requirement. This will extend the use of winter fuel into the summer months. The drivability concerns should not be single events but should be multiple occurrences associated with hot days.
PI-1408E2021-04-16. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Musty Odor from HVAC Vents on Startup Condition/Concern Some customers may comment on a musty or mildew odor coming from the HVAC instrument panel air outlet vents on startup. The odor most likely will dissipate after 30-60 seconds of operation. The odor generally occurs after the vehicle has been parked for 2–6 hours with sun load with temperatures of 21°C (70°F) or higher. This may be caused by condensation building up on the evaporator core, which does not evaporate by itself in humid conditions. The odor may be the result of microbial growth on the evaporator core being released into the air stream by the HVAC blower motor.
150089005A2021-04-16. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Essential Tools that Include Consumable Parts (U.S. Only)
150089004B2021-04-16. Service bulletin. SUSPENSION:FRONT:SHOCK ABSORBER; SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:REAR:SHOCK ABSORBER. Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
070849020M2021-04-16. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide
17-NA-3272021-04-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Information for Dead Battery Condition Some customers may comment on the following conditions: • Dead battery • Dead battery after car sits a couple days Cause This condition may be caused by the OnStar® module staying awake, drawing power from the battery. Correction Note: If the vehicle is towed to the dealer with a dead battery, it is highly unlikely that a battery draw will be verified once the battery is charged. Verify that the vehicle VIN is flagged in the Global Warranty Management / Investigate History (GWM/IVH). If the VIN is flagged, do a Blue Button Press from the vehicle and request a "Re-configuration" and operational evaluation.
16-NA-1752021-04-13. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. SHAKE AND/OR SHUDDER DURING LIGHT THROTTLE ACCELERATION BETWEEN 40 AND 128 KM/H (25 AND 80 MPH) AT A STEADY STATE.
150089004C2021-03-08. Service bulletin. SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:FRONT:SHOCK ABSORBER; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
21NA0262021-03-08. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY. This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
19NA2562021-03-01. Service bulletin. ENGINE. This service bulletin provides diagnostic aid procedure to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from engine.
18NA0732021-03-01. Service bulletin. ENGINE. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
090604026S2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE; EQUIPMENT. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.