WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Cadillac ATS

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

782 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
22NA0282022-06-21. Service bulletin. BACK OVER PREVENTION. This service bulletin provides a repair procedure to correct a customer concern of a Whining/Whirring, Whistle, Squeaking, Groaning/Growling Noise Coming from Front Wheel/Engine Area.
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
PIP57852022-03-14. Service bulletin. POWER TRAIN; BACK OVER PREVENTION. This Preliminary information communicates the source component of the noise could be the bearing or shaft and not engine related.
PIC6048N2022-02-14. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; STEERING; AIR BAGS; LANE DEPARTURE; BACK OVER PREVENTION. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in).
17NA0402021-12-20. Service bulletin. BACK OVER PREVENTION. This service bulletin provides a procedure to correct a condition of Brake Squeal or Squeak Noise Intermittently on Initial Brake Applies.
21NA0302021-05-24. Service bulletin. BACK OVER PREVENTION. This service bulletin provides a procedure to correct a customer concern of Engine Noise and/or Belt Squeak, MIL Illuminated.
PIP57852021-04-19. Service bulletin. POWER TRAIN; BACK OVER PREVENTION. This Preliminary information communicates the source component of the noise could be the bearing or shaft and not engine related.
PIC6086G2021-01-25. Service bulletin. VISIBILITY; BACK OVER PREVENTION. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
20NA0542020-04-27. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION: CAMERA SYSTEM. This informational bulletin provides information for dealers/technicians on Rear View Camera Guidance Lines Dim After Radio Replacement or Programming.
PIE0550A2020-04-06. Service bulletin. BACK OVER PREVENTION; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This engineering information (EI) ends the need for information from the field on conditions of Rear Vision Back Up Camera Image Goes Blank, Distorted, Grainy, Lines, Flickering or Service Message on CUE Screen. If these conditions are encountered, refer to SI for further diagnosis.
PIE05502019-12-16. Service bulletin. BACK OVER PREVENTION. This engineering information (EI) bulletin is requesting information from the field on conditions of Rear Vision Back Up Camera Image Goes Blank, Distorted, Grainy, Lines, Flickering or Service Message on CUE Screen. Eng is attempting to root cause condition and validate a field fix.
PIC6123C2019-06-03. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM; LANE DEPARTURE. This Preliminary Information communication provides information to the technician for the adaptive cruise control or lane keep assist unavailable message in the driver?s information center after the vehicle has been parked in direct sunlight and high ambient temperatures. The cameras electronic control unit?s internal operating temperature range is -40 degrees Celsius to 85 degrees Celsius. If the temperature of the electronic control unit of the camera module exceeds 85 degrees Celsius the image processor will no longer function resulting in adaptive cruise control and lane keep assist to be unavailable until the temperature falls to below the maximum operating temperature range
PIC6013E2019-06-03. Service bulletin. SERVICE BRAKES; ELECTRICAL SYSTEM; BACK OVER PREVENTION; LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that have a "ADAPTIVE CRUISE TEMPORARILY UNAVAILABLE" message on the Driver Information Center when attempting to activate the cruise. Technician will need to perform a Multi Axis Sensor yaw rate sensor learn procedure. If needed, also perform the Long Range Radar Learn called-out in the Radar Sensor Module - Long Range Programming and Setup procedure in Service Information.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.