WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Buick Regal

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1884 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
11-00-89-007C2018-06-04. Service bulletin. STRUCTURE:BODY; EQUIPMENT. This informational bulletin is a revision for 11-00-89-007B to add the 2014 model year and update the Labor Operation List.
PI0924A2018-05-29. Service bulletin. LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK; STRUCTURE:BODY:TRUNK LID; ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK. This preliminary bulletin provides a procedure to install a new relay to control the trunk opening up when the button has been accidently pressed.
01-08-51-003E2018-05-21. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. This informational bulletin provides recommendations and product information for application of anti-corrosion materials
06-08-64-001D2018-05-21. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE:BODY:DOOR. This Informational bulletin describes warranty part reviews where door glass had chips or scratches.
PI0281G2018-05-21. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
PIC5822E2018-05-21. Service bulletin. STRUCTURE. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
08-08-51-002A2018-04-16. Service bulletin. STRUCTURE:BODY. This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
02-07-30-029Y2017-12-22. Service bulletin. STRUCTURE. This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
PIC5822D2017-11-14. Service bulletin. STRUCTURE:BODY. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
PIP4495E2017-11-14. Service bulletin. STRUCTURE:BODY:HOOD. This Preliminary Information communication provides information to the technician about vehicles that have a loud tick or rattle noise under the hood at all operating conditions. Technician will need to check the lower and oil pressure to the upper end oil pressure. Technician will need to inspect the oil feed orifice in the cylinder head. Technician will clean out and debris found in the orifice.
PIP53382017-08-15. Service bulletin. SUSPENSION; STRUCTURE:FRAME AND MEMBERS. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
G-1668272017-08-15. Service bulletin. STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS. 13125 - Customer Satisfaction Program - There may be an interference condition between the outside door handle and the door handle bracket assembly. This could cause the outside door handle to stick or bind in the open position when the door is opened from outside of the vehicle. If this occurs, the door may bounce back when attempting to close it. If the door does not latch, a warning chime will sound and a warning message in the instrument cluster will illuminate. Tapping on the outside door handle or closing the door with higher effort should free the door handle and allow it to latch. Dealers will inspect and modify the front and rear outside door handles.
17-NA-1442017-08-15. Service bulletin. STRUCTURE:BODY:DOOR. This informational bulletin provides information for dealer personnel and technicians on diagnosis/repair for correcting a customer concern of wind noise from OSRVM or door areas.
PIC5822A2017-08-15. Service bulletin. STRUCTURE:FRAME AND MEMBERS; WHEELS; STRUCTURE:BODY. This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
PIC5870A2017-08-15. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles with radio speakers have poor audio quality, buzz, pop, static type noise or no audio. Technician should inspect the trunk mounted radio amplifier for any signs of moisture. Technician will need to Replace the amplifier if water is present and replace any terminals that have corrosion. Also water test the trunk, sunroof, back glass and roof areas. Technician will need to fix any water leaks and clean out all drain tubes.
PIC5779C2017-08-15. Service bulletin. STRUCTURE:BODY. This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.
16-NA-0702017-08-15. Service bulletin. STRUCTURE:BODY:TAILGATE. This informational bulletin provides information on the release of the tail lamp bezel for service use, instead of replacing the whole taillamp assembly
PIC5779A2017-08-15. Service bulletin. STRUCTURE:BODY. This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.
05-08-51-001H2017-08-15. Service bulletin. STRUCTURE:BODY. This informational bulletin provides information on removing paint stains on the under side of protective shipping film
PIC5317B2017-08-15. Service bulletin. WHEELS; STRUCTURE:BODY. This Preliminary Information communication provides information to the technician about vehicles that may have a tapping heard inside the vehicle. Technician should inspect for insulators being securely in place behind front wheel liners and reposition as necessary and or replace push pins as necessary.
PI0373A2016-11-23. Service bulletin. STRUCTURE; EQUIPMENT; VISIBILITY:REARVIEW MIRRORS/DEVICES. THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A PROCEDURE FOR RELEARNING THE POWER FOLDING MIRRIORS AND ROAD TESTIN TO VERIFY THEY CORRECT A CONDTION OF THE POWER FOLDING MIRRIORS GLASS SHAKES, FLUTTERS AT NORMAL DRIVING CONDITIONS.
PIC-5779-G2016-08-26. Service bulletin. STRUCTURE; EQUIPMENT. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH INFORMATION ON THE PROPER WASHING OF THE BRIGHT ALUMINUM MOLDINGS TO AVOID THE MOLDINGS FROM GETTING DAMAGED. IT IS RECOMMENDED THAT A NON-ALKALINE SOLUTION BE USED FOR PREPARATION & WASHING OF THE BRIGHT ALUMINUM MOLDINGS.
PIC-5822-B2016-08-24. Service bulletin. STRUCTURE:FRAME AND MEMBERS. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH THE STEPS TO DIAGNOSE AND REPAIR THE CONCERN OF MILDEW ODOR OR WATER ON FRONT FLOOR ON EITHER SIDE OF THE VEHICLE. TECHNICIAN WILL GAIN ACCESS TO THE FRONT WHEELHOUSE OF THE AFFECTED SIDE. THE FRONT WHEEL HOUSE FLANGE MAY HAVE A VOID IN THE SEALER CAUSING WATER TO LEAK THROUGH AND ACCUMULATE ON THE FLOOR OR WET CARPET WILL BE FOUND. A THUMB GRADE SEALER WILL NEED TO BE PLACED IN THE VOID TO PREVENT THE WATER LEAK INTO THE CABIN.
PIC-5260-A2016-08-11. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY. THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS.
PI-0281-E2016-08-06. Service bulletin. EQUIPMENT; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES INFORMATION THAT MAY BE HELPFUL WHEN ADDRESSING UNDERBODY COMPONENT CORROSION WITH CUSTOMERS.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.