WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Buick Enclave

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1027 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
PIT5595A2019-12-09. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communicates concern with the rear vision camera or surround vision camera image
PIP5621A2019-12-09. Service bulletin. POWER TRAIN. This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
PIT57202019-12-09. Service bulletin. VISIBILITY. This Preliminary information communicates that a customer may come to the dealer with a complaint of a hum, drone or pulsing type noise at times. On investigation the dealer may discover that this concern only occurs when the customer is driving with one or both rear windows down or one front window down. The dealer is instructed to advise the customer that if this is occuring with rear windows down to open a front window or the sunroof (if equipped) or if it is occurring with a front window down to open the other front window or the sunroof (if equipped) to alleviate this concern.
PIT3271J2019-12-09. Service bulletin. WHEELS; SERVICE BRAKES, AIR:ANTILOCK. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIT5074M2019-12-09. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
990420002K2019-11-25. Service bulletin. POWER TRAIN. This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
100089009C2019-11-25. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information on key code security and information on GM key code look up applications.
100089006G2019-11-25. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information for dealers how to submit a product information report (PIR) (Canada Only).
010601011K2019-11-25. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
010089010N2019-11-25. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
18NA3592019-11-25. Service bulletin. POWER TRAIN. This informational bulletin advises the tech of a possible normal condition caused when the transmission performs a 1-2 upshift at light throttle and why the D in the PRNDL will flash.
18NA3062019-11-25. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only).
16NA3382019-11-25. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
N192266190 022019-11-12. Service bulletin. ELECTRICAL SYSTEM. N192266190 02 - Service Update - (Revised Service Procedure for XT5). Certain vehicles may have an engine control software issue that can occur during an automatic stop/start event. Immediately following an auto-start and while the vehicle is stopped, this condition can cause the engine to run rough, run at reduced power, or, in rare cases, stall. DTC?s P0011, P0021, P0014, and P0024 may set. Dealers will reprogram the engine control module (ECM).
PIT5535E2019-11-12. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that may have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted.
PIP56842019-11-12. Service bulletin. EQUIPMENT. This Preliminary information communicates the use of air leak diagnostic test tool CH-52250 in addition to the information found in the service manual.
PIP5540E2019-11-12. Service bulletin. ENGINE. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5601A2019-11-12. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
PIT5551E2019-11-12. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
19NA2152019-10-28. Service bulletin. STRUCTURE. This technical bulletin provides repair information to correct a customer concern of Service Engine Soon (SES) Lamp Illuminated, and technician finding DTC U1345 set.
17NA0732019-10-28. Service bulletin. EQUIPMENT. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
N192266190 012019-10-21. Service bulletin. ELECTRICAL SYSTEM. N192266190 01 - Service Update. Certain 2018 model year Buick LaCrosse, Enclave, Cadillac XT5 and Chevrolet Traverse vehicles may have an engine control software issue that can occur during an automatic stop/start event. Immediately following an auto-start and while the vehicle is stopped, this condition can cause the engine to run rough, run at reduced power, or, in rare cases, stall. DTC?s P0011, P0021, P0014, and P0024 may set. Dealers will reprogram the engine control module (ECM).
N1922661902019-10-21. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. N192266190 - Service Update. Certain vehicles may have an engine control software issue that can occur during a stop/start event that is causing drivability concerns such as the engine running roughly. Potential reduced engine power or engine stall with DTC?s P0011, P0021, P0014, and P0024 may set. Dealers will reprogram the engine control module (ECM).
PIP56812019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates a poor weld or low weld adhesion for the bracket on the Bank 2 front exhaust pipe causing multiple possible concerns and the recommended repairs.
PIP4670H2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.