WenmarOpen by Wenmar Pro

Service bulletins for the 2026 BMW X7

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

19 on file from NHTSA, as of 2026-10-19.

By type

By component

Only bulletins with type: Service bulletin are shown. Show all

Bulletins, newest first
B6520252026-05-18. Service bulletin. ELECTRICAL SYSTEM. After replacing the Multifunctional Display (MFD), the Central Information Display (CID) is black. The backlight of the CID is illuminated, and touch function does register an audible sound.
B6403202026-05-18. Service bulletin. STRUCTURE:BODY. The center console and front cup holder get noticeably too warm to the touch on long journeys with the interior "Heating on".
B5219232026-05-18. Service bulletin. SEATS. In vehicles equipped with the second row 60% / 40% split seat, the flex cable assembly can come out of the seat rail mechanism (circled). This stops the forwards and backwards travel of the seat.
B5112242026-05-18. Service bulletin. STRUCTURE:BODY. There are two possible situations (rear left, right or both sides): A. The electric sunshade in the rear door does not function or sticks upon operation, and/or B. The electric sunshade is wavy.
B5201262026-03-13. Service bulletin. SEATS. The customer brings vehicle in with one or both of the second row 60/40 split seats in the folded position.The seat does not respond to any requests from the second seat row seat switch button(s).
B6528252026-01-05. Service bulletin. ELECTRICAL SYSTEM. The vehicle may experience various operational issues with the Multifunction Display such as: Intermittent black screen Permanent black screen Intermittent head unit functions not displayed (i.e., Navigation screen only is black)
B6527252026-01-05. Service bulletin. ELECTRICAL SYSTEM. The vehicle may experience various operational issues with the infotainment system such as: Resets of the head unit Delayed start-up of the head unit (longer than 30 seconds) Failed start-up of the head unit Sporadic or permanent problems with navigation Sporadic or permanent Bluetooth connection problems Sporadic or permanent audio problems Sporadic or permanent speech / IPA (international phonetic alphabet) problems Missing displays, radio stations, camera images or applications
B6413252026-01-05. Service bulletin. ELECTRICAL SYSTEM. When performing a vehicle test, diagnostic trouble code “ 8013FE Software run time error” is found in theIHKA module. If this fault is set for two consecutive life cycles, it will turn on the check engine light on vehicles with an I-level lower than 24-11-570. This fault memory entry does not cause an impairment of functionality of the automatic air conditioningsystem.
B6527252025-12-01. Service bulletin. ELECTRICAL SYSTEM. RSU availability. The vehicle may experience various operation faults with the infotainment system such as: Resets of the head unit Delayed start-up of the head unit (longer than 30 seconds) Failed start-up of the head unit Sporadic or permanent problems with navigation Sporadic or permanent Bluetooth connection problems Sporadic or permanent audio problems Sporadic or permanent speech / IPA (international phonetic alphabet) problems Missing displays, radio stations, camera images or applications
B3602252025-11-25. Service bulletin. WHEELS. The wheel bearing and the brake disc are not correctly aligned; are not concentric (circled). When applicable work is being performed, it is therefore difficult to remove the wheel bolts from, or fasten them into the wheel bearing hub.
B8406252025-10-09. Service bulletin. ELECTRICAL SYSTEM. In some situations, an emergency call may be triggered in the vehicle without either the customer pressing the SOS Call button, or an airbag deployment event. In some cases, the customer may not even be inside the vehicle.
B3408252025-10-09. Service bulletin. ELECTRICAL SYSTEM. Starting from I-level …24-07-500, it is possible that the Automatic Hold function is not automatically storedfor the next journey. The function must be activated again by the driver at the beginning of every trip. After asoftware update to 25-03-500 and higher, this occurs more frequently.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.