Service bulletins for the 2020 BMW X7
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
360 on file from NHTSA, as of 2026-10-19.
By type
By component
By topic
| B511219 | 2020-09-14. Service bulletin. ENGINE AND ENGINE COOLING. KIDNEY GRILL ACTIVE AIR FLAP FAULTS: A check control message or MIL (Malfunction Indicator Lamp) may be illuminated, with one or more of the following faults stored: 138207- Active cooling damper control (AKKS), top: blockage at warm ambient temperature 21B043- Active cooling damper control (AKKS), top: blockage at all ambient temperatures 138222- Active cooling damper control (AKKS), above: positional deviation error detected at warm ambient temperature 138209- Active cooling damper control (AKKS), top: Control deviation at all ambient temperatures 13822B- Active cooling damper control (AKKS), top: Control deviation at all ambient temperatures 21B042- Active cooling damper control (AKKS), below: blockage at all ambient temperatures 138206- Active cooling damper control (AKKS), bottom, blockage at warm ambient temperature 138225-Active air-flap control, bottom: top limit position not detected 138224-Active air-flap control, bottom: bottom limit position not detected Multiple potential issues may be the cause, including: 1. Faulty active air flap(s) (Upper and/or lower) 2. Software error in the DME 3. Debris or blockages from outside influence (non-warranty) 4. Information error memory that does not require a repair 5. For G20 only- Detached lower active air flaps |
|---|---|
| B090220 | 2020-09-14. Service bulletin. ELECTRICAL SYSTEM. REMOTE SOFTWARE UPGRADE: For BMW, Remote Software Upgrade (RSU) is the next consequent step with regard to digitalization and customer satisfaction. With the introduction of RSU, customers now can update the vehicle software by themselves. |
| B090218 | 2020-09-14. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. NEW ECU VALIDATION NEEDED AFTER REPLACING CERTAIN CONTROL MODULES: With introduction of the new Headunit HU-H3 (MGU Media Graphics Unit), there is a new protection mechanism against tampering. If one or more of the following components needs to be replaced, the secure connection between them must be re-established: MGU TCB Telematic Communication Box (ATM-02) RSE Rear Seat Entertainment and/or KOMBISP18 instrument cluster Prior to re-establishing this connection, an electronic certificate must be created in the BMW backend for importing into the Vehicle. After the replacement of one of the mentioned Modules, the Control Module needs a valid certificate for it to communicate with the other Modules. |
| B651220 | 2020-08-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. BMW CONNECTEDDRIVE APPS ARE NO LONGER AVAILABLE AFTER PROGRAMMING: After programming vehicle with "20-03" software, BMW ConnecedDrive apps are no longer available in the head unit. Software in the Head Unit High (HU-H3). |
| B650709 | 2020-08-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier. |
| B620119 | 2020-08-31. Service bulletin. EQUIPMENT:ELECTRICAL. INSTRUMENT CLUSTER AND ONBOARD COMPUTER INTERMITTENTLY INOPERATIVE: The audio source, radio station, or music track cannot be changed using the MFL. Normal functionality may possibly return after a sleep cycle or a battery reset. This affects vehicles with: Integration level S18A-18-11-5xx Live Cockpit Professional (option code 6U3) including the instrument cluster High 4.1. While the Kombi is not working properly the rest of the system is working properly. The customer can still use the Central Information Display (CID) for items such as entertainment settings, Driver Experience settings, etc, utilizing the I drive controller. The telephone functions are not affected. Unfavorable software at system start-up. |
| B522119 | 2020-08-31. Service bulletin. SEATS. SEAT OPERATIONAL CHANGES AS OF 7/2019 I-LEVEL FOR G05/G07: Flashing LED in trunk mounted switch pack. |
| B520420 | 2020-08-31. Service bulletin. SEATS. SOFTWARE UPDATE FOR SEAT CHECK CONTROL MESSAGES: There is an operating failure with various Check Control (CC) messages displayed regarding seat adjustment of the second and third row of seats. |
| B340517 | 2020-08-31. Service bulletin. SERVICE BRAKES, HYDRAULIC; WHEELS. TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving. |
| B180220 | 2020-08-31. Service bulletin. ENGINE; EQUIPMENT; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. DELIVERY STOP - INSPECT NUTS ON CATALYTIC CONVERTER: BMW AG has issued a Delivery Stop (effective June 23, 2020) on certain Model Year 2020 BMW vehicles that were produced between March 10, 2020 and June 1, 2020. Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop, until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery Stop. The nuts holding the catalytic converter to a bracket in the engine compartment may become loose. Over time, this may lead to damage to the exhaust system. The nuts on the catalytic converter bracket in the engine compartment have been incorrectly torqued (19 Nm instead of 28 Nm). |
| B170617 | 2020-08-31. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING. COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R): Coolant leaking from the engine compartment. Traces of coolant leaking from the expansion tank of the low temperature cooling system. Aluminum corrosion in the charge air intercoolers, or in the radiator for the low temperature cooling is causing an unfavorable chemical reaction to the coolant. |
| B121020 | 2020-08-31. Service bulletin. ELECTRICAL SYSTEM. DELIVERY STOP - CHECK STARTER BOLT: BMW AG has issued a Delivery Stop (effective July 30, 2020) on a small number of Model Year 2020 BMW vehicles that were produced on July 10, 2020. |
| B662919 | 2020-07-27. Service bulletin. VISIBILITY; BACK OVER PREVENTION. TOP VIEW CAMERA: IMAGE IS MISALIGNED: The top view image of the vehicle is misaligned when observed in the Control Information Display (CID). When the vehicle is parked in a parking spot with line markings, it is clearly noticed in the CID that the lines are not parallel to the side of the vehicle. This may be noticed on either the driver side, passenger side or both. Side view camera loose fitment in the exterior mirror bracket, causing changes to the top view image. |
| B640220 | 2020-07-27. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; SEATS. 3rd ROW CLIMATE CONTROL NOT AVAILABLE: Climate control operations are not available in the 3rd row when the 3rd row seats are folded down. Software in the automatic air conditioning control unit (IHKA). |
| B661120 | 2020-06-15. Service bulletin. ELECTRICAL SYSTEM. REVERSING ASSISTANT LIMITATIONS: The Reversing Assistant function is not operating to customer expectations. Some possible customer concerns are: Vehicle does not avoid objects in its path tires or wheels contact the curb reversing Assistant only works for a short distance. |
| B660920 | 2020-06-15. Service bulletin. ELECTRICAL SYSTEM. SURROUND VIEW WRONG VEHICLE DISPLAYED AFTER PROGRAMMING: After programming the wrong vehicle model is displayed in the Central Information Display (CID) when the Surround View is activated. |
| B541119 | 2020-06-15. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; EQUIPMENT. SUNROOF WATER LEAK DIAGNOSIS: This bulletin outlines multiple known areas of possible water entry for the vehicles listed above. It serves only as a diagnostic resource in troubleshooting water leak complaints from the roof area. This bulletin does not include all potential areas of water entry from the sunroof. Additional diagnosis may be required for vehicles which are not affected by the scenarios outlined below. The following situations are known to be potential causes for water entry into the vehicle from the sunroof area: Incorrect adjustment of sunroof glass panels Damage to the sunroof "perimeter seal" mounted to the roof Misplaced or damaged support foam for the center drip tray Damaged side seals of the rear sunroof glass panel Improperly installed clogged or kinked panoramic sunroof drain. |
| B510520 | 2020-06-15. Service bulletin. VEHICLE SPEED CONTROL. FUEL FILLER DOOR STICKING: The fuel filler door may be sticking requiring multiple attempts to open. The fuel filler door material can swell in wet conditions causing the filler door to stick. |
| B270220 | 2020-06-15. Service bulletin. LANE DEPARTURE; WHEELS. JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications. |
| B170320 | 2020-06-15. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; LANE DEPARTURE; SERVICE BRAKES, HYDRAULIC; ENGINE AND ENGINE COOLING. COOLANT LINE QUICK DISCONNECTS LEAK IN LOW TEMPERATURES AT OR BELOW -15Ë?C (5Ë?F): The coolant reservoir in the high or low temperature cooling system is low There may be a coolant leak under the vehicle There may be a check control message (ID166) to top up coolant The low temperature cooling system have a low level warning indicator. One or more faults may be stored related to the low temp cooling system: DME - 20A201 - charge air cooling system: Coolant pump protective function due to dry running active DME - 20A209 - charge air cooling system: Coolant pump protective function due to dry running active IHKA - 80120A - Compressor: Switch off due to excess pressure in the refrigerant circuit The outside temperature at the time of the complaint is at or below -15Ë? C (5Ë? F) The O-rings that seal the quick disconnect coolant lines will not seal properly when outside temperatures are at or below -15Ë? C (5Ë? F). |
| B170120 | 2020-06-15. Service bulletin. ENGINE AND ENGINE COOLING. SERVICE ACTION - ADD SILICONE BOOSTER TO LOW TEMP COOLING SYSTEM: The coolant in the low temperature cooling system may not have sufficient coolant corrosion protection. |
| B130420 | 2020-06-15. Service bulletin. ENGINE AND ENGINE COOLING. TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor tank vent valve signal: fixed FC 118001 - Mixture control: mixture too lean FC 118401 - Mixture control: mixture too lean large deviation I01 only: FC 124103 - Mixture control: mixture too lean FC 124101 - Mixture control: Mixture lean large deviation CAUSE Internal mechanical defect in the tank ventilation valve. The defect can also result in a very loud clicking noise when the valve is cycling. |
| B110120 | 2020-06-15. Service bulletin. ENGINE. B58C AND B58M ENGINES ENGINE OIL FILTER INSERT IS DIFFICULT TO REMOVE - REMOVAL: On rare occasions during an engine oil service the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing. The engine oil filter is broken. The paper is torn and the lower plastic section is stuck in the engine oil filter housing. |
| B840220 | 2020-05-18. Service bulletin. ELECTRICAL SYSTEM. REMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App. Software error in the Advanced Telematics Module 2 (ATM2). |
| B840120 | 2020-05-18. Service bulletin. ELECTRICAL SYSTEM. BMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2). |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.