WenmarOpen by Wenmar Pro

Service bulletins for the 2015 BMW M3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

205 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
B6301192019-05-20. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EXTERIOR LIGHTING:TAIL LIGHTS. DELIVERY STOP: REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly oil may have contaminated the plastic housing of the rear tail lamps causing damage to the mounting points of the tail light assembly.
B6123152019-05-20. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. The Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full This Service Information bulletin supersedes SI B61 23 15 dated April 2016.
B6301192019-05-20. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS. DELIVERY STOP: REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly oil may have contaminated the plastic housing of the rear tail lamps causing damage to the mounting points of the tail light assembly.
B8402192019-04-22. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT; ELECTRICAL SYSTEM. PHONE CALL AUDIO AUTONOMOUSLY SWITCH FROM VEHICLE TO PHONE. During an active phone call the call audio autonomously switches from the vehicle hands-free system to the phone.
B6526172019-04-22. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT; ELECTRICAL SYSTEM. NBT EVO CHANGES BETWEEN SELECTIONS BY ITSELF WITHOUT DRIVER INPUT- GHOST BEHAVIOR. The Central Information Display (CID) changes between selections (ghost behavior) and sounds an audio tone without the CID Screen being touched.
B6301192019-04-22. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS. DELIVERY STOP: REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly oil may have contaminated the plastic housing of the rear tail lamps causing damage to the mounting points of the tail light assembly.
B6301192019-03-18. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING. DELIVERY STOP REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly; oil may have contaminated the plastic housing of the rear tail lamps; causing damage to the mounting points of the tail light assembly.
B5110162019-03-18. Service bulletin. STRUCTURE:BODY:DOOR. GROANING NOISE FROM DOORS. Part Number Description Quantity F30; F31; F80 Front 51 33 7 414 531 Window guide; front left As needed 51 33 7 414 532 Window guide; front right As needed F30; F80 Rear A groaning noise is heard from any of the doors when driving over rough road surfaces.
B3303182019-02-25. Service bulletin. POWER TRAIN:AXLE ASSEMBLY; SUSPENSION:REAR; WHEELS. KNOCKING NOISE OR VIBRATION/DRONING NOISE FROM THE REAR AXLE. A hard knocking noise is heard from the rear axle area during load reversals. The tuning of the rear suspension mount for the differential.
B3301192019-02-25. Service bulletin. ENGINE; SUSPENSION:MULTIPLE AXLE. DRONING NOISE FROM THE REAR AXLE. A humming/droning noise is heard with vibration during partial to full engine load in higher gears. The tuning of the rear suspension mount for the differential.
B5130182019-02-25. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. GROANING NOISE FROM THE CENTER CONSOLE.
B5125182019-01-07. Service bulletin. STRUCTURE. RATTLE NOISE FROM LOWER A-PILLAR. A rattle noise is present from the lower area of the A-Pillar. Due to a manufacturing error, the bolt securing the front door brake/stop to the A-Pillar may have loosened over time.
B3407142019-01-07. Service bulletin. SERVICE BRAKES, HYDRAULIC. "Carbon Ceramic Brake Noise. INFORMATION ""M"" vehicles are designed for high-performance, spirited driving. To accommodate this type of driving profile, a braking system which exceeds the standards for handling heavy brake forces, extreme temperatures, and excellent stopping power at high speeds is required. ""M"" vehicles can be ordered with the optional ultra high-performance braking system, featuring perforated carbon ceramic brake discs designed for circumstances similar to those encountered on racetracks. The carbon ceramic brakes were designed to improve braking efficiency, and dramatically increase braking performance along with a significant reduction in weight. When developing the carbon ceramic brake system, the main focus was on braking performance for the sporty-minded driver, while accepting the comfort limitations of functional noises at slower speeds and when coming to a stop. Please inform the customer that the carbon ceramic brake system's functional noises (squealing/honking), are a known characteristic for this type of material, and are only a small trade-off for the improved braking performance. These functional noises have no effect on the performance, operational reliability and durability of the brakes. Part replacement will not provide a remedy for the noise; this is a known characteristic of the high-performance brake system. More information on the performance and operation of these brakes can be found in the Owner's Manual under ""M carbon ceramic brake."" WARRANTY INFORMATION Not applicable."
B3303182019-01-07. Service bulletin. SUSPENSION. KNOCKING NOISE OR VIBRATION/DRONING NOISE FROM THE REAR AXLE. 1 A hard knocking noise is heard from the rear axle area during load reversals. 2 A humming/droning noise is heard with vibration during partial to full engine load in higher gears. The tuning of the rear suspension mount for the differential.
B6601152018-12-17. Service bulletin. BACK OVER PREVENTION. Surround View Camera Last User Mode Operation Change. After programming with ISTA/P 2.53.5 or a more recent version, the rear camera view is displayed when the reverse gear is selected. The vehicle does not remember the last user mode (surround/top camera view). INFORMATION An operational concept change for the surround/top camera view was introduced with ISTA/P 2.53.5 (I-level Fxx-14-07-505). When the reverse gear is selected, the default view will be the rear camera. The surround/top camera view has been removed from the last user mode function. This is to meet the upcoming (new) federal regulations regarding rear view cameras. Note: The surround/top camera view is available, but the driver must manually switch the camera view using the iDrive controller.
B5125142018-12-17. Service bulletin. ENGINE. "Service Action: Replace Engine Compartment Sound Insulation. The sound insulation in the engine compartment does not seal properly. Manufacturing tolerances and a defect in workmanship may cause the sound insulation to leak water into the DME wiring connector. AFFECTED VEHICLES This Service Action involves F80 and F82 vehicles produced from March 18, 2014 to May 20, 2014. First check if a Service Action label with a code number 698 is already attached to the B-pillar. If a code number 698 has been punched out, the Service Action has already been performed and no further action is necessary. Vehicles which require this Service Action to be completed will show it as ""Open"" when checked either in the ""Service Menu"" of DCSnet (Dealer Communication System) or with the Key Reader."
B0006142018-12-17. Service bulletin. EQUIPMENT. ?SI B00 06 14April 2015 Maintenance and General HintsTechnical Service This Service Information bulletin supersedes SI B00 06 14 dated March 2015. designates changes to this revision SUBJECT BMW Early Warning Information Program.
B1226152018-12-10. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE. MDrive Buttons Are Not Functioning After Programming. The MDrive buttons may not be functioning on M vehicles which have been programmed to one of the following integration levels: ? F020-15-07-500 ? F020-15-07-501 ? F020-15-07-502 ? F020-15-07-503 CAUSE DME software (MDrive signal monitoring error)
B6210162018-12-10. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL. HeadUp Display does not Show Full Street Names. INFORMATION Design of the HUD has limited display area. (It can only show a certain number of text characters). NOTE: Parts replacement or programming the vehicle will not recitify the situation!
B8403142018-12-10. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
B6609162018-12-10. Service bulletin. VEHICLE SPEED CONTROL:CRUISE CONTROL; EQUIPMENT; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. """Collision Warning Failed"" or ""Pedestrian Warning Failed"" CCM Display. While driving, a Check Control Message (CCM) is displayed advising of the following: Front collision warning failed Pedestrian detection failed The following fault code is stored in the KAFAS (Camera-based Driver Assistance System): 0X800AC4 - Camera calibration failed The KAFAS camera is not properly mounted and secured to the mounting bracket on the windshield; And/ or: The mounting bracket glued to the windshield is not installed correctly. The pictures below show both incorrect and correct installation. This picture shows the KAFAS camera installed in the bracket. Notice the spacing highlighted by the ""green lines"""
B5112162018-12-10. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR; VISIBILITY:REARVIEW MIRRORS/DEVICES; VISIBILITY. Passenger Side Mirror Dimming Feature Operational Change. INFORMATION The automatically dimming exterior mirror function on the passenger's side has been deleted from the Option Code 430 as noted above. The automatic dimming function will continue to be operational on the driver's side mirror and rear view mirror.
B6206162018-12-10. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Instrument Cluster Resets during Active Navigation. The instrument cluster (MID KOMBI) fails sporadically (all gauges falling briefly to zero, flashing of all indicator lights) and resets. Reset occurs during active route guidance and predictably when passing certain geographical positions. Software error in navigation head unit
B5110162018-12-10. Service bulletin. STRUCTURE; STRUCTURE:BODY:DOOR. Groaning Noise from Doors over Rough Roads. A groaning noise is heard from the doors when driving over rough road surfaces. Window guide rubbing on door opening.
B8408152018-12-10. Service bulletin. EQUIPMENT:ELECTRICAL. "During the QC1 the BMW Assist Test Call Fails. After the transport mode is deleted (during the QC1), a BMW Assist (SOS) test call is made by pressing the SOS/ E-Call button. However, the call only connects via voice (no data is transmitted). The operator indicates that a crash call has been sent. ATM fault code ""B7F348 - Provisioning without signature OTA"" is stored. The provisioning of the ATM (Advanced Telematics Module) has failed."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.