Service bulletin B660115
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10152317 |
| Published by NHTSA | 2018-12-17 |
| Manufacturer's number | B660115 |
| Manufacturer's date | 2015-04-01 |
| NHTSA component | BACK OVER PREVENTION |
NHTSA's summary
Surround View Camera Last User Mode Operation Change. After programming with ISTA/P 2.53.5 or a more recent version, the rear camera view is displayed when the reverse gear is selected. The vehicle does not remember the last user mode (surround/top camera view). INFORMATION An operational concept change for the surround/top camera view was introduced with ISTA/P 2.53.5 (I-level Fxx-14-07-505). When the reverse gear is selected, the default view will be the rear camera. The surround/top camera view has been removed from the last user mode function. This is to meet the upcoming (new) federal regulations regarding rear view cameras. Note: The surround/top camera view is available, but the driver must manually switch the camera view using the iDrive controller.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| BMW 1 SERIES M | 2011 to 2013 |
|---|---|
| BMW 320I | 2013, 2014, 2015, 2016 |
| BMW 328D | 2014, 2015, 2016 |
| BMW 328I | 2012, 2013, 2014, 2015, 2016 |
| BMW 330E | 2016 |
| BMW 335I | 2012, 2013, 2014, 2015, 2016 |
| BMW 340I | 2016 |
| BMW 428I | 2014, 2015, 2016 |
| BMW 435I | 2014, 2015, 2016 |
| BMW 525D XDRIVE | 2014 |
| BMW 528I | 2011, 2012, 2013, 2014, 2015, 2016 |
| BMW 535D | 2014, 2015, 2016 |
| BMW 535I | 2011, 2012, 2013, 2014, 2015, 2016 |
| BMW 535I GRAN TURISMO | 2010, 2011, 2012 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 535I US | 2011 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 550I | 2011, 2012, 2013, 2014, 2015, 2016 |
| BMW 550I GRAN TURISMO | 2010, 2011, 2012 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 640I | 2012, 2013, 2014, 2015, 2016 |
| BMW 650I | 2012, 2013, 2014, 2015, 2016 |
| BMW 740I | 2012, 2013, 2014, 2015 |
| BMW 740I US | 2011 (the catalog's model; the bulletin names a series or trim of it) |
| BMW 740LD | 2015 |
| BMW 740LI | 2011, 2012, 2013, 2014, 2015 |
| BMW 750I | 2009, 2010, 2011, 2012, 2013, 2014, 2015 |
| BMW 750LI | 2009, 2010, 2011, 2012, 2013, 2014, 2015 |
| BMW 760LI | 2010, 2011, 2012 |
| BMW 760LI | 2014, 2015 |
| BMW ACTIVE HYBRID 3 | 2013 |
| BMW ACTIVE HYBRID 3 | 2014, 2015 |
| BMW ACTIVE HYBRID 5 | 2012, 2013 |
| BMW ACTIVE HYBRID 7 | 2012 to 2013 |
| BMW ACTIVE HYBRID 7 | 2014, 2015 |
| BMW ACTIVEHYBRID 7 | 2011 |
| BMW F800 R | 2013 |
| BMW F800 R | 2015, 2016 |
| BMW I8 | 2014, 2015, 2016 |
| BMW M3 | 2015, 2016 |
| BMW M4 | 2015, 2016 |
| BMW M5 | 2013, 2014, 2015, 2016 |
| BMW M6 | 2013, 2014, 2015, 2016 |
| BMW R 1200 GS ADVENTURE | 2011 (the catalog's model; the bulletin names a series or trim of it) |
| BMW R NINE T | 2015 |
| BMW R1200 S ADVENTURE | 2014 to 2016 |
| BMW X3 | 2011, 2012, 2013, 2014, 2015, 2016 |
| BMW X4 | 2015, 2016 |
| BMW X5 | 2014, 2015, 2016 |
| BMW X6 | 2015, 2016 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| B650414 | 2022-12-12. Service bulletin. According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present. |
|---|---|
| SIB511016 | 2022-07-05. Service bulletin. Groaning noise from doors. This service information bulletin replaces SI B51 10 16 Dated March 2016. |
| B340517 | 2020-04-20. Service bulletin. TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: This Service Information Bulletin (Revision 3) replaces SI B34 05 17 dated September 2017. Ticking noise coming from front wheel while cornering without brakes applied noticeable at low speeds. The vehicle must be moving. See attached video V34 01 20 Note: For a similar noise heard when parking with the brakes applied refer to SIB 31 01 12. Microscopic movement of the contact interface between the inner brake disc and the wheel bearing flange on vehicles equipped with lightweight brake discs. |
| B660116 | 2018-12-10. Service bulletin. SUBJECT TRSVC Control Unit Cannot Be Programmed. During ISTA/P session, ISTA/P requests that the TRSVC (Top Rear Side View Camera) control unit be replaced because ISTA/P cannot program it. Software error in the TRSVC control unit |
| 660814 | 2018-11-26. Service bulletin. Side View Camera Does Not Display Picture. The side view camera does not display a picture: z After engaging reverse gear z Activating the side view camera via the switch on the center console near the gear shift CAUSE z Water (moisture) entering the cable assembly, causing corrosion on the pins in the connector(s) at the camera(s) z Poor cable connection to the camera(s) |
| 651914 | 2018-11-26. Service bulletin. DWA Siren Malfunction. When the anti-theft alarm (DWA) is triggered, the horn comes on instead of the alarm siren. DWA internal monitoring is too sensitive. |
| 660614 | 2018-11-13. Service bulletin. Rear View Camera Does Not Display Image on CID. After engaging the reverse gear, the reversing camera does not display a picture in the CID (Central Information Display). CAUSE The drive mechanism for the roundel actuation in the boot lid is faulty. |
| 660413 | 2018-11-13. Service bulletin. Reversing Camera Intermittently Does Not Display a Picture. After engaging reverse gear, the reversing camera intermittently does not display a picture. However, after a key cycle, the reversing camera once again displays the picture. One or more of the following may be noticed on the display at different times: 1. Black screen 2. Blue screen 3. Grey striped screen Note: All the displays may be seen with or without an exclamation mark. CAUSE Software error in the camera control unit (TRSVC - Top Rear Side View Camera) |
| B660615 | 2018-11-05. Service bulletin. Sporadic Check Control Messages of the Driver Assistance System. Sporadically, a CCM (Check Control Message) is displayed advising that the Camera-based Driver Assistant system has failed. This is due to the vehicle interior reaching very high temperatures. During this failure, all KAFAS (Camera-based driver assistance systems) system functionalities are inoperative. The affected functionalities are: Pedestrian Detection Front Collision Warning Lane Departure Warning Speed Limit Info (if equipped) The following fault code is stored in the KAFAS control unit: 0x800AC0 - Switching off due to excess temperature Note: The system is functional after the interior temperature has cooled down or by cycling the ignition off and on again. Incorrect calibration of the temperature sensor in the KAFAS camera. |
| B310112 | 2018-11-05. Service bulletin. CLICKING NOISE FROM FRONT AXLE This Service Information bulletin supersedes SI 31 01 12 dated June 2015. Clicking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers). CAUSE Movement between the contact surfaces of the wheel bearing and swivel bearing (knuckle) |