WenmarOpen by Wenmar Pro

Service bulletins for the 2017 BMW 530i

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

461 on file from NHTSA, as of 2026-10-19.

By type

By component

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
B3403172018-11-05. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). DYNAMIC STABILITY CONTROL FAILURE. Instrument cluster indicates Dynamic Stability Control (DSC) failure. You cannot establish communication with the DSC control unit. Associated control units (DME, ACSM) register DSC-related communication time-outs. After battery reset, DSC operates normally and has no faults registered. Software in the DSC control module.
B6613182018-10-09. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA. SERVICE ACTION: REPLACE KAFAS CAMERA (CAMERAASSISTED DRIVERS ASSISTANCE SYSTEM): The KAFAS camera features are inoperative, and this does not trigger any warnings or check control messages.
B6608172018-05-21. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: Sporadically, when the rear view camera is activated, either via selecting reverse with the shift selector or by direct camera selection, no image appears in the display.
B6617172018-05-14. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. MISSING DISPLAY OF SURROUND VIEW CAMERA: Central Information Display (CID) sporadically does not display Surround View Camera image.
B6608172018-05-14. Service bulletin. BACK OVER PREVENTION. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: Sporadically, when the rear view camera is activated, either via selecting reverse with the shift selector or by direct camera selection, no image appears in the display.
B6613172018-04-23. Service bulletin. BACK OVER PREVENTION. SURROUND VIEW CAMERA DISPLAYS INCORRECT VEHICLE MODEL: After programming the vehicle, the incorrect vehicle model is displayed in the CID (Central Information Display) when surround view camera function is active.
B6607182018-04-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. GREEN BARS DISPLAYED IN CENTRAL INFORMATION DISPLAY WHEN CAMERA ACTIVE: Wide green bar across bottom and up right side of Central Information Display (CID) when reverse gear is selected and the Surround View camera is active.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.