WenmarOpen by Wenmar Pro

Service bulletins for the 2017 BMW 330e

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

304 on file from NHTSA, as of 2026-10-19.

By type

By component

Only bulletins with component: Lighting are shown. Show all

Bulletins, newest first
B6309172023-05-01. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Exterior rear lights do not work.
B0107222022-05-31. Service bulletin. FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING. Component and Issue Specific Limited Emission Warranty Extension. This bulletin is notice of a limited emission warranty extension. This is NOT a notice of a Recall or Service Action. There is no immediate repair required unless the BMW vehicle is currently experiencing this problem. Customer Notification Letter Even though this is NOT a Recall, BMW NA is sending VIN-specific customer notification letters. The plastic fuel tank has two openings, one at the top right and the other at the top left. The top right opening (passenger's side, serviceable) provides a mounting point and repair access to the intake fuel pump/level sensor assembly. The top left opening (driver's side, non-serviceable) serves as an access point for the installation of the suction jet pump/level sensor assembly during the fuel tank manufacturing process. After these components are installed, the top left side opening is then permanently closed and sealed with the installation of a circular Coex biopolymer plastic cover plate which is welded into place. Over time, the left side opening plastic cover plate weld may become damaged. Should this occur, there is the possibility of fuel leakage. Additionally, your vehicle will store the corresponding fault codes that may also be generated, and the Malfunction Indicator Lamp (MIL) will illuminate.
B6301192019-06-24. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EXTERIOR LIGHTING:TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly oil may have contaminated the plastic housing of the rear tail lamps causing damage to the mounting points of the tail light assembly.
B6301192019-05-20. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EXTERIOR LIGHTING:TAIL LIGHTS. DELIVERY STOP: REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly oil may have contaminated the plastic housing of the rear tail lamps causing damage to the mounting points of the tail light assembly.
B6301192019-05-20. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS. DELIVERY STOP: REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly oil may have contaminated the plastic housing of the rear tail lamps causing damage to the mounting points of the tail light assembly.
B6301192019-04-22. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS. DELIVERY STOP: REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly oil may have contaminated the plastic housing of the rear tail lamps causing damage to the mounting points of the tail light assembly.
B6301192019-03-18. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING. DELIVERY STOP REWORK TAIL LIGHTS. The tail light mounting brackets may be cracked or broken. During assembly; oil may have contaminated the plastic housing of the rear tail lamps; causing damage to the mounting points of the tail light assembly.
B6411162018-11-13. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. HALOGEN HEADLIGHT ADJUSTMENT PROCEDURE. Halogen headlights may be misaligned (aimed too low or high).
B6306162018-11-13. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. HALOGEN HEADLIGHT ADJUSTMENT PROCEDURE. Halogen headlights may be misaligned (aimed too low or high).
B6305162018-11-05. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES. "HEADLIGHT ASSEMBLIES HAVE VISIBLE INTERNAL MOISTURE/CONDENSATION. Water on the inside (A) or misting (B) of both headlight lenses that is visible from outside. Water inside the headlights can be caused by two situations: Water/moisture ingress into the headlight housing. Thermal conditions that result in the formation of condensation. Note: An important indication that the moisture issue is caused by ""condensation"" rather than a ""water leak"" into the headlight housing, there will be misting/condensation in ""both headlights."""
B6308162018-11-05. Service bulletin. EXTERIOR LIGHTING:TURN SIGNAL; ELECTRICAL SYSTEM. TURN SIGNAL - INTERMITTENTLY FLASHES AT FASTER RATE. Turn signal, intermittently, flashes at faster rate or not at all. Software error in FEM (Front Electronics Module)
B6309172018-05-14. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS. REAR TAIL LIGHT FAILURE: Exterior rear lights do not work.
B6305162018-05-07. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES; EXTERIOR LIGHTING. HEADLIGHT ASSEMBLIES HAVE VISIBLE INTERNAL MOISTURE/CONDENSATION: Water on the inside (A) or misting (B) of both headlight lenses that is visible from outside.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.