Service bulletin B641116
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10147553 |
| Published by NHTSA | 2018-11-13 |
| Manufacturer's number | B641116 |
| Manufacturer's date | 2016-07-01 |
| NHTSA component | EXTERIOR LIGHTING:HEADLIGHTS |
NHTSA's summary
HALOGEN HEADLIGHT ADJUSTMENT PROCEDURE. Halogen headlights may be misaligned (aimed too low or high).
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Lighting, Headlights
| BMW 320I | 2013, 2014, 2015, 2016, 2017 |
|---|---|
| BMW 328D | 2014, 2015, 2016, 2017 |
| BMW 328I | 2012, 2013, 2014, 2015, 2016 |
| BMW 330E | 2016, 2017 |
| BMW 330I | 2017 |
| BMW 335I | 2012, 2013, 2014, 2015, 2016 |
| BMW 340I | 2016, 2017 |
| BMW ACTIVE HYBRID 3 | 2013 |
| BMW ACTIVE HYBRID 3 | 2014, 2015 |
| BMW R 1200 GS ADVENTURE | 2017 (the catalog's model; the bulletin names a series or trim of it) |
| BMW R1200 S ADVENTURE | 2017 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 511511 | 2018-11-26. Service bulletin. Headlight Washer Nozzle Cover Sticks Out. |
|---|---|
| 513114 | 2018-11-13. Service bulletin. Headlight Cleaning System: Functional Operation Change. The customer complains that the headlight cleaning system is not working properly and only works after several actuating attempts. CAUSE The "functional" operation of the headlight cleaning system was changed with integration level F020-14-07-500. The functional changes to the headlight cleaning system's operation will occur only after programming the vehicle with ISTA/P 2.53.0 or higher. INFORMATION The headlight cleaning system is no longer activated with the first stalk activation when the lights are on. The functional programming change now requires the stalk to be activated four times before headlight cleaning is activated. The change prevents automatic activation of headlight cleaning when the customer only wants to clean his/her windshield. This is normal operation and no parts should be changed. |
| 630814 | 2018-11-13. Service bulletin. Active Headlight Control Malfunction in Both Headlights. AHL (Active Headlight Control) malfunctions on both sides. Both lights aim either up or down while driving. Fault Code 8041B6 is present. Broken mounting bolt holding on the rear height sensor bracket. |
| 630714 | 2018-11-13. Service bulletin. "One or Both Xenon Headlights Aiming Downwards. CAUSE Both sides are aiming downwards: * The most likely cause is a faulty or disconnected rear height sensor. In very extreme cases due to poor road conditions, both headlight assemblies could have the vertical aim ball socket adjuster disconnected, as noted below. Only one side is aiming downwards: * The cause could be a ""disconnected"" vertical aim ball socket adjuster, resulting from excessive road vibration or sharp impacts (pot holes) through the suspension to the headlight assembly. Important Note: Follow the procedure outlined in this bulletin first; replacing headlight assemblies for a vertical aim ball socket adjuster issue is an excessive repair." |
| 630814 | 2018-11-13. Service bulletin. Active Headlight Control Malfunction in Both Headlights. AHL (Active Headlight Control) malfunctions on both sides. Both lights aim either up or down while driving. CAUSE Broken mounting bolt holding on the rear height sensor bracket |
| MC61461571 | 2018-11-13. Service bulletin. Mist forms in the headlight. This is due to condensation and goes away again. |
| B630315 | 2018-11-13. Service bulletin. "Halogen Headlight Side Bulbs Fail. The check control message (CCM) ""Parking lamp malfunction: Consult service center"" is displayed when the vehicle is started. Defective side light bulb on one or both sides" |
| 630115 | 2018-11-13. Service bulletin. "SUBJECT Check Control Message: Adaptive LED Headlight Malfunction. The following CC message is displayed: ""LED Headlight malfunction"" The fault codes listed below are stored in the LHM2 (LED main light module) and are not currently present: z LHM2_L: 8059A9 - Fan 1 defect z LHM2_L: 8059AA - Fan 2 defect z LHM2_R: 805B29 - Fan 1 defect z LHM2_R: 805B2A - Fan 2 defect Coding error in the LHM2 module" |
| B630616 | 2018-11-13. Service bulletin. HALOGEN HEADLIGHT ADJUSTMENT PROCEDURE. Halogen headlights may be misaligned (aimed too low or high). |
| B630516 | 2018-11-05. Service bulletin. "HEADLIGHT ASSEMBLIES HAVE VISIBLE INTERNAL MOISTURE/CONDENSATION. Water on the inside (A) or misting (B) of both headlight lenses that is visible from outside. Water inside the headlights can be caused by two situations: Water/moisture ingress into the headlight housing. Thermal conditions that result in the formation of condensation. Note: An important indication that the moisture issue is caused by ""condensation"" rather than a ""water leak"" into the headlight housing, there will be misting/condensation in ""both headlights.""" |