Service bulletins for the 2018 Bentley Flying Spur
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
176 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Wheels are shown. Show all
| 2063651/5 | 2025-11-07. Service bulletin. WHEELS. Tyre tread/sidewall crack(s) |
|---|---|
| 2063651/4 | 2025-03-08. Service bulletin. WHEELS. Tyre tread/sidewall crack(s) |
| 2063017/4 | 2025-03-08. Service bulletin. WHEELS. Road wheel inspection procedure. Condition: In the event a complaint is received regarding road wheel/s condition for example: • Scratches • Corrosion • Damage • Blemishes • Chipping |
| 2063651.3 | 2023-11-08. Service bulletin. WHEELS. Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern) |
| 2063017.3 | 2023-11-08. Service bulletin. WHEELS. Road wheel inspection procedure Customer Statement: In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions |
| 2063651.2 | 2022-12-08. Service bulletin. WHEELS. Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern Technical Background: -The issue is mainly evident on vehicles with very low usage This is a result of the tyre compound hardening due to the following: -Tyre age -Tyre pressure not adjusted to specification -Low mileage/vehicle usage -Vehicle storage conditions |
| 2063017.2 | 2022-12-08. Service bulletin. WHEELS. Road Wheel Inspection Procedure: Customer Statement: In the event of a complaint is received regarding road wheel/s condition for example: -scratches -corrosion -damage -blemishes -chipping |
| 2033864/6 | 2021-10-04. Service bulletin. WHEELS. Customer statement / workshop findings: Unable to remove Accessory valve caps, Figure 1 shows an example of the caps. Technical background: We have observed instances where the caps have been difficult to remove once fitted, the issue is caused by corrosion. The valve stem itself is made from aluminium and the accessory valve caps are chromium plated brass, it is possible under certain environmental conditions, particularly winter road salt, for corrosion to take place between these dissimilar metals. Measure: The solution is to apply a thin smear of silicon-based grease, such as Dow Corning high vacuum grease, to the external threads of the valve stem prior to fitting the accessory valve cap. Grease should be applied any time the cap is removed and grease is not evident |
| 2063651/1 | 2021-07-02. Service bulletin. WHEELS. Tyre tread/sidewall crack(s). Customer statement / workshop findings: Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern). The issue is mainly evident on vehicles with very low usage This is a result of the tyre compound hardening due to the following: - Tyre age - Tyre pressure not adjusted to specification - Low mileage/vehicle usage - Vehicle storage conditions |
| 2063017/1 | 2021-05-05. Service bulletin. WHEELS. Road wheel inspection procedure: In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions. Technical background: Do not consider submitting a warranty claim for a road wheel manufacturing defect without first referencing and understanding the contents of this document. Any defect or concern found either outside the guidelines stated in this document or not clearly stated as acceptable to support a warranty claim, will be the responsibility of the retailer regarding component replacement. Any road wheels deemed as having no issues found relating to a manufacturing defect (including curbing) will have the applicable claim rejected |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.