Service bulletins for the 2018 Bentley Flying Spur
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
176 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Transmission and driveline are shown. Show all
| 2059068.6 | 2023-11-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN. Transmission communication DTC's (Numerous) - W12 engine Customer Statement: -Drive system fault active on DIP (Figure 1) |
|---|---|
| 2056407.5 | 2023-11-06. Service bulletin. POWER TRAIN; STEERING. Running gear - Noise identification Workshop Findings: -The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2062261/1 | 2021-03-04. Service bulletin. ELECTRICAL SYSTEM; SUSPENSION; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Bentayga - Air suspension warning light within the DIP - DTC P089200 Symptom Code 3145792 - Evident within Address 74. Customer statement: Air suspension warning light within the DIP Workshop findings: P089200 Symptom Code 3145792 - TCM Power Relay Sense Circuit Intermittent (Level Control Valves Open Circuit) Technical background: Refer to the Measure section of this TPI. |
| 2053170/6 | 2020-11-05. Service bulletin. POWER TRAIN; EQUIPMENT; ENGINE; ELECTRICAL SYSTEM. Gear shift optimisation procedure - W12 TSI only. Customer statement / workshop findings: Customer reporting dissatisfaction with transmission shift quality in various driving conditions Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non- approved aftermarket modifications conducted including the modification of the engine control modules ( chip tuning) Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further repairs relating to the shift quality complaint Technical background: IMPORTANT: To allow the engine and transmission to adapt to the customers driving style the vehicle MUST either have covered at least 1000 miles/1600 Km or must have been used over a six week period (which ever occurs first) before carrying out the instructions within this TPI |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.