Service bulletins for the 2022 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
708 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| 2065604/1 | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Suspicion that control units or services have been influenced by third parties. Customer statement / workshop findings: In the event a customer complaint is received relating to a suspicion that control units or services have been influenced by third parties the instructions within this TPI should be followed. Technical background: A suspicion that control units or services have been influenced by third parties means that unauthorised people or groups may have gained access to a vehicle's control unit(s) or online services and may have manipulated them in such a way that may compromise customer data confidentiality or the operation of the vehicle and/or online services. When investigating potential third party influences of control units or online services, it is important to take all normal diagnostic measures to rule out a normal functional error or misuse of the system by the user |
|---|---|
| 2051045/4 | 2022-01-06. Service bulletin. EQUIPMENT; STRUCTURE. Night vision camera - Washer jet leaking. Customer statement / workshop findings: Washer fluid dripping/leaking from the night vision camera washer jet. Technical background: Please note: The photographs shown within this TPI are based on a New Continental GT/C vehicle however the process is similar regardless of vehicle type Referring to Figure 1 - In the event the afore mentioned symptom is evident the operative should refer to the Measure section of this TPI to replace the night vision washer jet (short link hose -Circled) which connects the night vision camera washer jet (A) to the washer jet supply hose connector (B) |
| 2063410/3 | 2022-01-03. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Customer statement / workshop findings Issue suspected with the Infotainment Main unit (5F / J794) - For example: - MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background The operative should continue as follows: - Complete the questionnaire within the Measure section of this TPI (Part 1) once completed the questionnaire should be attached to an existing or already open DISS query - Once the questionnaire is complete, the operative should refer to (Part 2) within the Measure section regarding fault finding/diagnosis of the Infotainment Main unit (5F / J794) |
| 2065215/1 | 2021-12-07. Service bulletin. ENGINE AND ENGINE COOLING. V8 Kovomo engine replacement (Fitment of ancillary components). Customer statement / workshop findings: Torque values for ancillary components (used during engine replacement) are not currently available within the Repair manual. The affected components and torque values are as listed within the Technical background section of this TPI. Measure: Refer to the Technical background section |
| 2055580/9 | 2021-12-07. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Rotating Display - Fault Diagnosis. Customer statement / workshop findings: Various rotating display operational complaints or noises. Technical background: Follow the Measure section of this TPI that relates to your customer complaint. |
| 2055580/8 | 2021-12-07. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Rotating Display - Fault Diagnosis. Customer statement / workshop findings: Various rotating display operational complaints or noises. Technical background: Follow the Measure section of this TPI that relates to your customer complaint. |
| 2065085/1 | 2021-12-07. Service bulletin. SUSPENSION; ELECTRICAL SYSTEM. Knocking noise from the front and/or rear - DTC C1298F1 evident within D4 and/or D5. Customer statement / workshop findings: - Knocking noise from the underside of the vehicle (front and/or rear) when driving on uneven road surfaces - DTC C1298F1 (Suspension stabilization actuator Regulation not possible) evident within diagnostic address D4 and/or D5 - Bentley Dynamic ride fault evident within the DIP Technical background: In the event the symptoms are as described, Refer to the instructions within the Measure section of this TPI |
| 2062184/3 | 2021-12-07. Service bulletin. PARKING BRAKE:ELECTRICAL; ELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC. Electronic Parking Brake (EPB) functionality issues. Customer statement / workshop findings: The following issues could be evident during PDI or found whilst in service - Electronic Parking Brake (EPB) found not operating to specification - EPB may not hold the car effectively - Parking brake components showing signs of wear - Parking brake warning light may also be evident within the DIP (See example shown in Figure 1). NOTE: The following DTCs may also be evident - C10E1F2: - 158720 - Parking brake motors Positions not plausible - C10BDF1: - 160768 - Right parking brake motor Upper travel limit exceeded And/or - C10BCF1: - 161024 - Left parking brake motor Upper travel limit exceeded Technical background: The issues described can be evident due to the car being driven in Transport mode with the EPB applied during the Transit process Or In some cases similar symptoms may be seen whilst in service |
| 2058512/6 | 2021-11-06. Service bulletin. SEAT BELTS; ELECTRICAL SYSTEM. New Continental GT and GTC - Front Passenger Safety Belt Presenter Does Not Deploy. Condition: Front Passenger Safety Belt Presenter does not deploy when expected. Service: Check for Diagnostic Trouble Codes (DTC’s) relating to the Front Passenger Safety Belt Presenter, if DTC’s are not evident conduct the following process. |
| 2058411/4 | 2021-11-06. Service bulletin. SEAT BELTS. Seat belt buckle stop button - Missing, Condition: Seat belt buckle stop button missing Technical Background: The seat belt buckle stop button should be evident as shown in Figure 1. Should the seatbelt be as shown in Figure 2 (Buckle stop button missing OR broken/loose) - Refer to the Measure section of this TPI |
| 2052349/7 | 2021-11-06. Service bulletin. ELECTRICAL SYSTEM; SEAT BELTS. Front seatbelt - Diagnostic Trouble Codes Condition: Diagnostic Trouble Codes (DTCs) evident in Address: 0015 System name: 15 - Airbag Control Module B130474: Left front seat belt tensioner control module Actuator deviated B130574: Right front seat belt tensioner control module Actuator deviated The DTCs can be evident if the occupant uses a dummy seat belt buckle, the occupant may use the dummy seat belt buckle to prevent a warning light or audible warnings Technical Background: Dummy seat belt buckles of any description MUST NOT be used under any circumstances, Figure 1 shows an example of a dummy seat belt buckle - B130474 and/or B130574 |
| 2053348/5 | 2021-11-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. W12 Engine management light on - Turbocharger speed sensor DTCs stored. Customer statement / workshop findings; - The engine management light is on. Workshop findings: The customer statement can be reproduced. Either of the following DTCs are stored in address 01 Engine Control Module 1 or address 11 Engine Control Module 2 - P257900: Turbocharger Speed Sensor A - Circuit Range/Performance Or - P259400: Turbocharger Speed Sensor B - Circuit Range/Performance Or - P259500: Turbocharger Speed Sensor B - Circuit low |
| 2064555/1 | 2021-11-05. Service bulletin. SUSPENSION. Unusual air suspension behaviour when the vehicle is static. Customer statement / workshop findings Unusual air suspension behaviour when the vehicle is static for example: - Air suspension raising and lowering without request NOTE: Customer complaints regarding hard suspension when driving the vehicle may also be received Technical background. To confirm the issue is as described within the Customer statement refer to the video on the Bentley Hub referencing TPI 2064555/- In the event that the issue is as shown within the video the instructions within the Measure section should be followed |
| 2064477/2 | 2021-11-05. Service bulletin. POWER TRAIN; STRUCTURE. Knock/clunk noise from the rear of the vehicle (Rear axle). Customer statement / workshop findings: Knock/clunking noise heard from the rear of the vehicle when changing direction at low speed Technical background: Ensure the fault is as described within the Customer statement Refer to the videos on the Bentley Hub referencing TPI 2064477/- In the event the knock/clunk is as shown within the videos the instructions within the Measure section should be followed noting the following: Video number 4 for TPI 2064477/- (on the Bentley Hub) specifically relates to the symptom described within step 3 of the Measure section (Heatshield in contact with the rear differential) |
| 2053914/10 | 2021-11-05. Service bulletin. SERVICE BRAKES, HYDRAULIC; SERVICE BRAKES; SERVICE BRAKES, AIR:DISC:PADS; SERVICE BRAKES, AIR:DISC:CALIPER. Customer statement / workshop findings Front brake squeal at 1.5 KHz when reversing during brake application Technical background VERY IMPORTANT: This TPI is only applicable to Non-CSiC Brake Systems only NOTE: Warranty payments will only be considered for vehicles which are within the applicable VIN range (see TPI header data) in conjunction with a DISS query with evidence that the applicable frequency was initially evident. |
| 2064477/3 | 2021-11-05. Service bulletin. POWER TRAIN; POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT:SEAL; STRUCTURE. Customer statement / workshop findings: Knock/clunking noise heard from the rear of the vehicle when changing direction at low speed Technical background: Ensure the fault is as described within the Customer statement Refer to the videos on the Bentley Hub referencing TPI 2064477/- In the event the knock/clunk is as shown within the videos the instructions within the Measure section should be followed noting the following: Video number 4 for TPI 2064477/- (on the Bentley Hub) specifically relates to the symptom described within step 3 of the Measure section (Heatshield in contact with the rear differential) |
| 2063353/1 | 2021-11-05. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; STRUCTURE. Customer statement / workshop findings: Unable to set the passenger side exterior mirror memory when reversing (as per the instructions within the owner handbook) Production change -Owner handbooks for later vehicles/models will be revised -Amended owner handbooks or addendums will not be available for this particular issue |
| 2051526/8 | 2021-11-05. Service bulletin. EQUIPMENT; STRUCTURE; ELECTRICAL SYSTEM. Customer statement / workshop findings: The chrome brightware strip on the veneer face fascia panel of the Bentley Rotating Display (BRD) may appear to be misaligned with the chrome strips on the passenger and drivers side fascia panels. In addition, the gapping and fit between the veneer face fascia panel of the BRD and the passenger and drivers side fascia panels may differ from one side to the other. The minimum functional gaps between the BRD and the passenger/driver fascia and the switch pack if not maintained can impact on the rotational operation of the BRD unit Technical background: The chrome brightware strip is fixed to the veneer face fascia panel with no separate adjustment and as such can appear to be misaligned. The veneer face fascia panel relies on fixed location pins that may be out of tolerance. Rework the veneer face fascia panel to align the chrome brightware strip and/or the gapping between the BRD and the passenger and drivers side fascia panels. |
| 2055580/7 | 2021-11-05. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Customer statement / workshop findings: Various rotating display operational complaints or noises. Technical background: Follow the Measure section of this TPI that relates to your customer complaint. Possible customer complaint. 1. Operational issues 2. Rotating display alignment 3. Grinding noise on operation 4. Rattling noise on operation 5. Squeak/creak on operation 6. Creak/rattle from rotating display whilst driving/uneven operation during rotation |
| 2061605/4 | 2021-11-05. Service bulletin. STRUCTURE:BODY:DOOR; STRUCTURE. Customer statement / workshop findings: Driver or Passenger door creak during close Technical background: Ensure the fault is as described within the Customer statement, refer to the video on the Bentley Hub referencing TPI 2061605/- In the event the symptom is as shown the instructions within the Measure section should be followed NOTE: The video shown on the Bentley Hub is for reference purposes only, the symptom is the same regardless of vehicle type shown |
| 2064791/1 | 2021-11-05. Service bulletin. SUSPENSION; STRUCTURE; STRUCTURE: UNDERRIDE. Customer statement / workshop findings: Knocking noise from the underside of the vehicle (front and/or rear) when driving on uneven road surfaces. Technical background: Verify that the customer complaint matches the sound file within the Bentley Hub - Reference TPI Transaction number 2064791/- The noise present in the sound file can be caused by worn anti roll bar bushes, the noise can appear when driving over an uneven road surface or during a large suspension input for example: -Speed humps or potholes If the customer complaint occurs and the noise can be clearly assigned to the noise within the sound file - Refer to the instructions within the Measure section of this TPI |
| 2064582/1 | 2021-11-05. Service bulletin. SUSPENSION. Vehicle sitting low on one or more corners when static with no relevant DTCs stored. Customer statement / workshop findings - Vehicle sitting low on one or more corners when static - No relevant DTCs are evident Technical background: Refer to the Measure section of this TPI. Measure: 1) Confirm there are no DTCs indicating a fault with the air suspension system or associated systems 2) Refer to the instructions within TPI 2053492/- to confirm that no air leaks or issues relating to the air springs are evident. |
| 2064776/1 | 2021-11-05. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Customer statement / workshop findings -Engine misfiring -Engine running rough (not refined) -Engine misfire DTCs evident -Engine management light illuminated within the DIP -Knocking noise from the cylinder head (NOTE: The noise can be evident on either bank) IMPORTANT: The symptoms described are typically evident during early life stages of vehicle use (between 100Km and 250Km) |
| 2064679/1 | 2021-11-05. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:SOLENOID/ACTUATOR. Customer statement / workshop findings Oil leaking out of the tell tale hole from the following fixings: -CDA activation/ deactivation solenoid fixings -Or Fuel rail fixings -Or Fixings for the vacuum system assembly Technical background: Shows oil leaked which had leaked from the tell tale hole at the top of the fixing. Upgraded fixings prevent oil leaks from the tell hole. |
| 2064519/1 | 2021-11-05. Service bulletin. PARKING BRAKE; SERVICE BRAKES, ELECTRIC; ELECTRICAL SYSTEM. DTC's C10BCF6 - 160000 and/or C12E2F2 with symptom code 59744 stored in address 0003 - Parking brake warning in DIP. Customer statement: Parking brake warning light evident within the DIP (See example shown in Figure 1) Workshop findings: C10BCF6 - 160000 - Left parking brake motor Engine speed implausible OR C12E2F2 - 159744 - Right parking brake motor Engine speed implausible. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.