WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Bentley Continental

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

830 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
2058277/22020-03-04. Service bulletin. STRUCTURE. Continental GTC - Hood insulation pad tension strap fitting procedure Condition In the event the insulation pad (ARROW - Figure 1) requires replacing, the onward instructions within this TPI must be followed Technical Background The right and left hand tension straps (Figure 2) are no longer fitted at the time of manufacture, the Measure section within this TPI details the procedure which must be followed to fit the tension straps
2058465/12020-03-04. Service bulletin. STRUCTURE. Continental GTC - Hood insulation cover checks prior to replacement Customer statement / workshop findings: Should any of the following components require replacing: Convertible hood insulation pad Convertible hood outer cover Convertible hood inner lining Refer to the onward instructions within this TPI Technical background: Please refer to the instructions within the Measure section of this TPI to check/confirm if the insulation pad is damaged prior to replacement IMPORTANT: In the event the insulation pad is found to be at fault please refer to TPI 2058277/1
2058194/12020-02-08. Service bulletin. STRUCTURE. Door mirror mounting foot cracked Customer statement / workshop findings Door mirror mounting foot is cracked Technical background In the event the door mirror mounting is cracked, the mounting must be replaced as per the current Repair manual instructions. Please Note: The repair manual instructions will be revised to include the information within the Measure section of this TPI, these instructions MUST be followed until the repair manual is revised.
2058424/12020-02-08. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. New Continental GT and New Continental GTC - Rear quarter glass not fully closing Customer statement / workshop findings: Referring to Figure 1 - During the window and/or door close operation, the front door drop glass closes and seals (Point A) however the rear quarter glass does not fully close and seal (Point B) leaving a gap between the front and rear glass (Point C) Measure: Retailers should advise customers to pull and hold the front window switch up manually (until the affected window is closed) the window close function should return when the customer exits the vehicle and closes the door Alternatively Close the windows by using the convenience close feature if fitted and active (Refer to Owners handbook) Or should the vehicle not have the convenience close feature Open and then immediately close the front door - Check and confirm the quarter glass window now automatically closes.
2058277/12020-02-08. Service bulletin. STRUCTURE. Customer statement / workshop findings In the event the insulation pad (ARROW - Figure 1) requires replacing, the onward instructions within this TPI must be followed. Technical background The right and left hand tension straps (Figure 2) are no longer fitted at the time of manufacture, the Measure section within this TPI details the procedure which must be followed to fit the tension straps.
2056582/22020-01-09. Service bulletin. STRUCTURE. Condition: Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if there are any TPIs which are applicable to the customers complaint/issue if there is an applicable TPI available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required). For correct diagnosis and repair the attached Flowchart must be followed in conjunction with the Measure section of this TPI
2052431/32019-12-06. Service bulletin. STRUCTURE; EQUIPMENT. Customer statement / workshop findings: Rattle / buzzing noise from Control Unit for Head-Up display - dashboard upper trim panel. Technical background: Several known conditions may cause Rattle / buzzing noise from dashboard upper trim panels. • Relative movement between Control Unit for Head-Up Display and associated Trim Ring – figure 1. • Contact between the dashboard and dashboard upper trim panel. • Head-up Display internal fault
2052394-42019-09-23. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY:DOOR. New Continental GT and New Continental GTC - Driver/Passenger door power latch creak on close
2052092-32019-09-23. Service bulletin. STRUCTURE:BODY:DOOR. New Continental GT - Door 'soft close' functionality
2051748-72019-09-23. Service bulletin. STRUCTURE:BODY. New Continental GT - Wind noises
2051524-22019-09-23. Service bulletin. STRUCTURE. New Continental GT - Adjustable rear spoiler fails to operate
2051495-22019-09-23. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS; STRUCTURE:BODY. New Continental GT - Rear lamps, Boot lid and Rear bumper moulding
2040820-32019-04-22. Service bulletin. STRUCTURE. Vibration humming noise in the cabin from the front bulkhead
2052956-12019-02-19. Service bulletin. STRUCTURE; STRUCTURE:BODY. Rear bow casting replacement
204964612018-06-18. Service bulletin. STRUCTURE. Trim Strip For Rear Panel Brake Light - Blackware - Paint Adhesion (SC18/05)

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.