WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Bentley Continental

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

830 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Lighting are shown. Show all

Bulletins, newest first
2080097/22026-07-29. Service bulletin. ENGINE; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; STRUCTURE:BODY. Service info: Conversion of imported vehicles. Technical background: Conversion of a vehicle for use in a market other than the one for which it was originally designed or intended is not supported. Enquiries related to conversions or retrofits of vehicles from (or to) other markets (e.g. reimport from USA or UK) are not supported by Technical Support. Vehicles are developed and constructed according to specific market requirements of the respective destination country. As the compatibility of different components (e.g. control units) cannot be defined comprehensively regarding their mutual dependence and interaction in the case of modifications, and in order to prevent danger or risks due to constructional changes, support or advice regarding these modifications cannot be provided.
2050542/82025-07-08. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING; VISIBILITY/WIPER. Front Exterior Lighting Steamed Up/Leaks | 12-24MY.
2071934/12024-01-09. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp control unit replacement and/or turn signal control unit replacement. Customer statement / workshop findings: Headlamp low beam / high beam malfunction / operational issues (Inner lamp) Or Daytime running light malfunction / operational issues (Inner lamp) Or Turn signal malfunction / operational issues (Outer lamp)
2054599/92024-01-04. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Diagnosis guidelines relating to Headlamp operation/Daytime running lights (Inner lamp) and/or Turn signal (Outer lamp). Customer statement / workshop findings: Operational issues are evident with one or a combination of the following: - Headlamp low beam / high beam malfunction / operational issues (Inner lamp) Or - Daytime running light malfunction / operational issues (Inner lamp) Or - Turn signal malfunction / operational issues (Outer lamp) Or Numerous static and/or intermittent DTCs are evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7)
2050542.72023-11-06. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING; VISIBILITY. Service info: body/equipment: front exterior lighting steamed up/leaks Customer Statement: -1. The lenses of the headlights (illustration 1a) /front fog lamps (illustration 1b) are steamed up/damp from the inside with minor drips. 2. Water is in the headlight (illustration 2a) / front fog lamp (illustration 2b), big drips.
2071050/22023-10-06. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp control unit replacement - New Continental GT and New Continental GTC. Customer Complaint: Headlamp low beam/high beam malfunction Or Headlamp - Daytime running light (DRL), position light or direction indicator malfunction Workshop finding: Headlamp assembly diagnosed as faulty. Technical background: It is not possible to determine between internal lamp defects and control unit failures therefore this TPI is to advise the replacement of the headlamp control unit(s) in the first instance The complete headlamp assembly should only be replaced if replacement of the control unit(s) was not successful.
2071050/12023-09-07. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp control unit replacement - New Continental GT and New Continental GTC. Customer statement / workshop findings: Headlamp low beam/high beam malfunction Or Headlamp - Daytime running light (DRL), position light or direction indicator malfunction Workshop finding: Headlamp assembly diagnosed as faulty. Technical background: It is not possible to determine between internal lamp defects and control unit failures therefore this TPI is to advise the replacement of the headlamp control unit(s) in the first instance The complete headlamp assembly should only be replaced if replacement of the control unit(s) was not successful Depending on the symptom the following should be conducted: - Head lamp low beam or high beam malfunction - Refer to Scenario 1 - Replace the headlamp rear control unit - Head lamp (DRL), position light or direction indicator malfunction - Refer to Scenario 2 - Replace the headlamp side control unit - Should both issues be evident please conduct the instructions as detailed in Scenarios 1 and 2
2068609.22023-01-06. Service bulletin. EXTERIOR LIGHTING; STRUCTURE. Rear Lamp Gap/Profile and Alignment Customer Statement: -Rear lamp gap/profile appears to be out of specification -Raise a technical DISS query
2068609.12023-01-06. Service bulletin. EXTERIOR LIGHTING; STRUCTURE. Rear Lamp Gap/Profile and Alignment Customer Statement: -Rear lamp gap/profile appears to be out of specification Technical Background: -Due to the design and fitment of the rear lights in relation to the surrounding components the operative must refer to the applicable Rep. Gr to confirm if the gap/profile of the rear lamps is to specification before conducting any adjustments or before raising a technical DISS query.
2061857.62023-01-06. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp Switch - Inoperative/Not illuminated - DTC U110B00 within 09 - Central Electrics (BCM1) Customer Statement: -Headlamp Switch - Inoperative/Not illuminated -Yellow warning light/message within the DIP (Adaptive Lighting Fault)
2066236.22022-12-08. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Unintended sounding of the alarm siren - Following activation of the ignition or whilst the vehicle is left standing Customer Statement: -The following DTCs could also be evident within the diagnostic address 0046 and/or 00BB and/or 00BC -B131DF5: alarm system siren supply voltage lower limit value less than -B131D29: sirens/alarm horn for anti-theft warning system range/performance -B131D29: anti-theft alarm system siren/alarm horn signal, not valid
2050542.62022-12-08. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Body/Equipment: Front exterior lighting steamed up/leaks Customer Statement: -The lenses of the headlights/front fog lamps are steamed up/damp from the inside with minor drips
2061857.52022-12-07. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1) Customer Statement: -Headlamp switch -Inoperative/Not Illuminated Workshop findings: -DTC U110B00 within 09-Central Electrics (BCM1) as shown in figure 1
2051511.82022-12-07. Service bulletin. ELECTRICAL SYSTEM; INTERIOR LIGHTING. Mood Lighting Customer Statement: -Mood lighting strip fixed on one colour regardless of which colour scheme is selected or not illuminated at all.
2061857/42022-07-08. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1). Customer statement / workshop findings: Headlamp switch - Inoperative/Not illuminated Workshop findings - DTC U110B00 within 09-Central Electrics (BCM1) as shown in Figure 1 Figure 1 - Yellow warning light/message within the DIP (Adaptive Lighting Fault) NOTE: Some lighting functionalities can in some cases be lost for example: - Rear fog light activation - All weather lighting mode activation - Headlamps default to dipped beam however high beam will still activate manually NOTE: Recycling the ignition will not resolve the problem Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a “sleep” state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON.
2066236/12022-04-06. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Unintended sounding of the Alarm siren - Following activation of the ignition or whilst the vehicle is left standing. Customer statement / workshop findings: Unintended sounding of the alarm siren following activation of the ignition Or Unintended sounding of the alarm siren whilst the vehicle is left standing Workshop findings. The following DTCs could also be evident within diagnostic address 0046 and/or 00BB and/or 00BC - B131DF5: alarm system siren supply voltage lower limit value less than - B131D29: sirens / alarm horn for anti-theft warning system Range/Performance - B131D29: anti-theft alarm system siren / alarm horn signal, not valid Technical background: In the event the symptom(s) described are evident, please refer to the instructions within the Measure section of this TPI
2055589/42022-01-08. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM; EXTERIOR LIGHTING:HEADLIGHTS:DAYTIME RUNNING LIGHTS:BULBS. Outer daytime running light/s not working - Warning message within the DIP. Customer statement: - Left and/or right outer daytime running light/s not working (Figure 1). Workshop Findings: - DTC C10EF04 evident within Diagnostic address 29 Light control left and/or 39 Light control right Technical background: A software error in the headlight control modules can lead to malfunctions with the front Daytime Running Lights. The instructions within this TPI are for vehicles with Low specification lights(PR code 9C7) The instructions are not applicable to vehicles with High specification lights (PR code 8K9)
2054599/72021-10-07. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Headlamp operation issues Condition: Headlamp operation issues. Technical Background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which may be evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to.
2054599/82021-10-07. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Customer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which maybe evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to New Flying Spur (20 - 22 M/Y) and Bentayga (21 - 22 M/Y). In the event that DTCs C119813 Low beam light bulb open circuit or C1198FA Low beam light bulb short circuit are evident in D6 and/or D7. Please refer to and conduct the instructions within the following TPIs New Flying spur - TPI 2063777/- Bentayga applicable to 21 and 22 M/Y only - 2064497/-. For any other issues please refer to the instructions within the Measure section of this TPI.
2050542/52021-10-05. Service bulletin. EXTERIOR LIGHTING:FOG LIGHTS; EXTERIOR LIGHTING; EQUIPMENT. Service info: body/equipment: front exterior lighting steamed up/leaks. Customer statement / workshop findings Customer statement: 1. The lenses of the headlights (illustration 1a) /front fog lamps (illustration 1b) are steamed up/damp from the inside with minor drips. or 2. Water is in the headlight (illustration 2a) / front fog lamp (illustration 2b), big drips. Technical background 1. Damp air settles on the inner lens of the headlights/fog lamps, with recognisable misting in certain weather conditions (comparable with the steaming up of spectacle lenses when entering a warm room in winter or of the bathroom mirror after a shower). 2. Leak on the headlights/front fog lamps. For example through open covers, a damaged seal of the cap or similar.
2061857/32021-10-04. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS:SWITCH; ELECTRICAL SYSTEM. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1) Customer statement: Headlamp switch - Inoperative/Not illuminated Workshop findings: DTC U110B00within 09-CentralElectrics (BCM1), Figure in attachment -Yellow warning light / message within the DIP(Adaptive Lighting Fault) NOTE: Some lighting functionalities can in some cases be lost for example: -Rear fog light activation -All weather lighting mode activation -Head lamps default to dipped beam however high beam will still activate manually NOTE: Recycling the ignition will not resolve the problem Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a “sleep” state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON.
2061857/22021-03-05. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1). Customer statement: Headlamp switch - Inoperative/Not illuminated Workshop findings DTC U110B00 within 09-Central Electrics (BCM1) as shown in Figure 1. Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a sleep state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON. Measure: 1) Referring to Rep.Gr 96 Replace the headlamp switch
2061857/12021-02-05. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1). Customer statement: Headlamp switch - Inoperative/Not illuminated Workshop findings - DTC U110B00 within 09-Central Electrics (BCM1) as shown in Figure 1 Figure 1 - Yellow warning light/message within the DIP (Adaptive Lighting Fault) NOTE: Some lighting functionalities can in some cases be lost for example: - Rear fog light activation - All weather lighting mode activation - Headlamps default to dipped beam however high beam will still activate manually NOTE: Recycling the ignition will not resolve the problem Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a “sleep” state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON
2054599/62020-11-03. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp operation issues. Customer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which may be evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to
2054599/52020-09-05. Service bulletin. EXTERIOR LIGHTING. Headlamp operation issues. Customer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which may be evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.