Service bulletins for the 2018 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
830 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Steering are shown. Show all
| 2060446/2 | 2020-10-08. Service bulletin. SUSPENSION; EQUIPMENT; STEERING. Clicking noise from the front wheels when conducting a static lock to lock steering manoeuvre. Customer statement / workshop findings: Clicking noise from the front wheels whilst performing a static lock to lock steering manoeuvre Technical background: Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2060446/- The operative MUST ensure that all similar symptom TPIs are checked to ensure the fault is exactly as described Should the issue be as confirmed in the video, the operative should refer to the instructions within the Measure section of this TPI |
|---|---|
| 2060446/1 | 2020-09-05. Service bulletin. STEERING; SUSPENSION. Clicking noise from the front wheels when conducting a static lock to lock steering manoeuvre. Customer statement / workshop findings Clicking noise from the front wheels whilst performing a static lock to lock steering manoeuvre Technical background Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2060446/1 The operative MUST ensure that all similar symptom TPIs are checked to ensure the fault is exactly as described Should the issue be as confirmed in the video, the operative should refer to the instructions within the Measure section of this TPI |
| 2058837/1 | 2020-04-03. Service bulletin. STEERING; ELECTRICAL SYSTEM. DTCs C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Customer statement / workshop findings DTCs C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Diagnostic address 44 Technical background Refer to the Measure section of this TPI |
| 2056407/2 | 2020-01-09. Service bulletin. STEERING; SUSPENSION. Condition: Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if any TPIs are applicable to the customers complaint/issue, should an applicable TPI be available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required) For correct diagnosis and repair, the attached Flowchart must be followed in conjunction with the Measure section of this TPI |
| 2051978-3 | 2019-09-23. Service bulletin. SUSPENSION; STEERING. Steering wheel vibration or steering wheel out of alignment |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.