WenmarOpen by Wenmar Pro

Service bulletins for the 2012 Bentley Continental

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

297 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Steering are shown. Show all

Bulletins, newest first
2056407/72025-11-06. Service bulletin. STEERING; SUSPENSION. Running gear - Noise identification. Condition Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system
2056407/62025-03-08. Service bulletin. STRUCTURE:BODY; SUSPENSION; STEERING. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering.
2056407.52023-11-06. Service bulletin. POWER TRAIN; STEERING. Running gear - Noise identification Workshop Findings: -The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2056407.42022-12-08. Service bulletin. STEERING; SUSPENSION. Running Gear - Noise Identification Customer Statement: -Noise complaint from the suspension and/or steering
2056407/32021-10-04. Service bulletin. STEERING; SUSPENSION. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system
2032307/52020-12-04. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STEERING. Steering upright replacement guidelines. Customer statement / workshop findings: In the event a steering upright is required to be replaced - Refer to the onward instructions (Figure 1). Technical background: During this TPI the Workshop manual and the ETKA parts catalogue is quoted, it is recommended that the procedures and part numbers referenced are checked by the operative as the process within the Workshop manual and the ETKA parts catalogue may have changed. Measure: Refer to the table shown below (depending on model) with regard to any replacement of the front steering uprights In the event the vehicles current parts are at the specified level and regardless of the side in which the parts are fitted, both sides MUST be replaced If
2056407/22020-01-09. Service bulletin. STEERING; SUSPENSION. Condition: Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if any TPIs are applicable to the customers complaint/issue, should an applicable TPI be available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required) For correct diagnosis and repair, the attached Flowchart must be followed in conjunction with the Measure section of this TPI
202702272017-09-27. Service bulletin. STEERING: STEERING WHEEL/HANDLE BAR. New Continental GT - GTC and Flying Spur - Steering wheel noise
204658512017-08-10. Service bulletin. STEERING:RACK AND PINION; STEERING:RACK AND PINION:RACK. Steering rack noise
2043974/22016-10-26. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; WHEELS; STEERING. REPLACING FRONT WISHBONE LINKS *REVISED*
2039769/22016-10-26. Service bulletin. STEERING:COLUMN. LEFT - MULTI FUNCTION STEERING WHEEL SWITCH (E440) DTC *REVISED*
204508012016-10-11. Service bulletin. STEERING. ALL NEW CONTINENTAL GT AND ALL NEW CONTINENTAL GTC STEERING SHIMMY/VIBRATION ROW
SB-2030348-32016-03-16. Service bulletin. WHEELS; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; STEERING:HYDRAULIC POWER ASSIST SYSTEM; TIRES. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2030348-12016-03-16. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; STEERING:HYDRAULIC POWER ASSIST SYSTEM. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2026285-42016-03-16. Service bulletin. STEERING: STEERING WHEEL/HANDLE BAR. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.