Service bulletins for the 2022 Bentley Bentayga
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
636 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 2064321/2 | 2021-11-05. Service bulletin. STRUCTURE. Bentayga - Rear jack block fitting instruction Technical background: The repair instructions within this Service Campaign are different depending on the vehicle type (Hybrid or Non Hybrid) the operative MUST ensure the correct instructions within the Work section are conducted as follows: Hybrid vehicles (Section 1 within the Work section). The left hand rear jack block 4M4 802 829B (supplied with vehicle) MUST NOT be fitted during the PDI procedure. If fitted a clash condition could occur between the left hand rear jack block and left hand coolant pipe. NOTE: The coolant pipe is only applicable to Bentayga Hybrid vehicles. IMPORTANT: The right hand jack block 4M4 802 830B supplied in the kit bag MUST be fitted using (x2) fixings, the fixings were not supplied with the kit bag at the time of vehicle dispatch. Non Hybrid vehicles (Section 2 within the Work section): The left hand rear jack block 4M4 802 829B and right hand jack block 4M4 802 830B supplied with the kit bag can be fitted to Non Hybrid vehicles using (x4) N911 512 01. |
|---|---|
| 2064469/1 | 2021-10-07. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Bentayga - Rear Window Blinds Do Not Fully Retract. Customer statement / workshop findings: Rear window blind/s do not fully retract (Jammed) |
| 2064482/1 | 2021-10-07. Service bulletin. STRUCTURE. Audible creak from the lower/central A Post when opening and/or closing the front door/s. Customer statement / workshop findings: Audible creak coming from the lower/central A Post in the vicinity of the check strap fixing point during the opening and/or closing of the driver/passenger door. Technical background: To confirm the issue is as described within the Customer statement refer to the video on the Bentley Hub referencing TPI2064482/-. In the event that the noise is as shown within the video the instructions within the Measure section should be followed. |
| 2053351/7 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; STRUCTURE. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. Measure: Test a comparable vehicle with the same Engine derivative. If the same noise is apparent on the comparable vehicle and no oil pressure warnings or relevant DTCs are stored then the noise can be considered a characteristic of the vehicle and no further action should be taken. |
| 2062075/2 | 2021-10-06. Service bulletin. STRUCTURE; EQUIPMENT; ELECTRICAL SYSTEM. Owner's Handbook - Incorrect roof console image shown - Garage Door Opener (GDO) Condition: The Owners Handbook is showing an incorrect roof console image, highlighting the Garage Door Opener (GDO) programming switches for Bentayga 21MY vehicle derivatives NOTE: The (GDO) is an optional feature |
| 2057841/3 | 2021-10-06. Service bulletin. VISIBILITY; STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage) |
| 2056582/4 | 2021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.