WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Bentley Bentayga

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

636 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
2058573/52025-03-07. Service bulletin. ENGINE; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM. DTC P04F000 EVAP system high pressure purge line performance DTC logged. Customer Statement: Emission control system warning light illuminated within the DIP.
2063410/72025-03-07. Service bulletin. ELECTRICAL SYSTEM. Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Condition: Issue suspected with the Infotainment Main unit (5F / J794) - For example: • MMI screen image flickers or goes blank • No response to selection • Audio cuts out
2075922/12024-12-05. Service bulletin. ENGINE; ELECTRICAL SYSTEM. High pitched whistle from the engine - Warning light within the DIP - Engine not running smoothly - Numerous DTC's. Customer statement/Workshop findings • Emission control warning light evident within the DIP • Engine not running/idling smoothly • High pitched whistle from the right and left hand side of the engine TIP: Refer to video within the Bentley Hub referencing TPI 2075922/- • A selection of DTC’s are evident (as per TPI Event memory entries)
2075792/12024-11-04. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Noises from Panoramic sun roof.
2073231/22024-11-02. Service bulletin. ELECTRICAL SYSTEM. Loading system message in the Infotainment screen (screen stuck). Customer statement / workshop findings: The Infotainment system is stuck on the loading screen • Loading system, please wait message is visible on the Infotainment screen
2061369/82024-11-01. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Engine overheating - Warning in the DIP (V8 Kovomo) Customer statement / workshop findings: One or a combination of the following symptoms are evident • Engine overheat warning in the DIP (Engine overheating) • Unusual cooling fan operation at high temperatures • P19F700: Low engine coolant temperature indicator lamp coolant too warm • Signs of coolant in the vacuum hoses for switch valve N649
2071131/22024-11-01. Service bulletin. ELECTRICAL SYSTEM. Measured values - Cycle recording instructions. Technical background The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis.
2075034/22024-11-01. Service bulletin. BACK OVER PREVENTION: WARNINGS; STRUCTURE:BODY; ELECTRICAL SYSTEM; SERVICE BRAKES; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING. EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Customer statement / workshop findings: One or a combination of the following is evident within the DIP • Electronic parking brake warning And/or • Drivers door power latch intermittent operation warning
2075331/12024-10-08. Service bulletin. ELECTRICAL SYSTEM; ENGINE. Engine light in the DIP - Various oxygen sensor / Fuel ratio DTC’s logged within the Engine Control Module(s). Customer statement / workshop findings: Engine light in the DIP - Various oxygen sensor / Fuel ratio DTC’s logged within the Engine Control Module(s).
2075318/12024-10-08. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Engine light in the DIP - Various Camshaft adjuster DTC’s logged within the Engine Control Module(s). Customer statement / workshop findings: Engine light in the DIP - Various Camshaft adjuster DTC’s logged within the Engine Control Module(s).
2075140/12024-10-04. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Engine cooling system over cooling - One or a combination of DTC's may be evident P218100 - P1BB400. Customer statement / workshop findings: • DTC P218100 - Cooling System Performance and / or DTC P1BB400 Cylinder head temperature too low is stored in the Engine Control Module (ECM). • Emission Control Lamp illuminated on the Driver Instrument Panel.
2070041/32024-10-04. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Engine coolant overheat warning in the DIP - One or a combination of DTC's may be evident P017B00 - P017C00 - P017E00. Customer statement: Engine coolant overheat warning within the DIP
2075018/22024-10-03. Service bulletin. ELECTRICAL SYSTEM. Issues with mobile phone wireless charging - Wireless charging does not work. The customer complains that the mobile device sometimes cannot be charged wirelessly.
2073967/22024-10-03. Service campaign. ELECTRICAL SYSTEM. Emergency call module and communication unit (0075) - Software update - Dongle removal (SC24/13)
2075035/12024-10-02. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM. DTC B200000 with symptom code 1049088 evident in the high voltage battery charger control module (Diagnostic address C6).
2075034/12024-09-10. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Technical background: The micro switch signal of the door lock is not recognised or is recognised briefly, a counter press of the door by the operative is required to clearly recognise the signal Insufficient back pressure of door (door closing loads / seal load) results in the pawl microswitch signal becoming too short. This short signal is then calculated as an error state by address 0003 -Brake electronics.
2075018/12024-09-10. Service bulletin. ELECTRICAL SYSTEM. Issues with wireless charging/wireless charging does not work. Customer statement / workshop findings: The customer complains that the mobile device sometimes cannot be charged wirelessly. One of the following three situations is described: • The phone gets very hot while charging and charging is cancelled. • The phone is not charged and the following message is shown on the MMI: “The device cannot be charged as there is another object in the charging cradle.” • The phone does not start charging after it has been placed in the charging cradle. • The phone or individual processes are switched off to protect the phone as a result of heat generation. The mobile device supports wireless charging or the customer uses a charging cover that enables wireless charging
2060205/72024-09-10. Service bulletin. ELECTRICAL SYSTEM; ENGINE. Engine Cooling System over cooling - DTC P218100 - V8 Kovomo. Technical background It is possible for the engine coolant Thermostat to corrode over time, this corrosion is due to an adverse reaction of the Thermostat material with the engine coolant. The corrosion and subsequent build-up of debris prevents the correct operation of the thermostat when closing, resulting in over cooling. The ECM triggers a DTC when the target engine temperature is outside of the specified parameter.
2074230/12024-08-07. Service bulletin. ELECTRICAL SYSTEM. Netflix and Google cast operation issues - Bring your own content - Over The Air (OTA) Update to software version 12.2.2. An Over The Air Update (OTA) is required for both of the Bring Your Own Content (BYOC) screens The update addresses the following issues: • Netflix browser compatibility issue • Google Cast airserver certificate issues
2068946/82024-07-06. Service bulletin. FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM. DTC P0B2500 logged within address 0021 (Battery Energy Control Module 2) - Dynamic ride system warning visible. Customer statement: Bentley dynamic ride system fault is displayed within the Drivers Instrument Panel (DIP) Workshop findings: DTC P0B2500 - Hybrid/EV Battery "A" Voltage low is stored within address 21- Battery Energy Control Module 2 Technical background: Possible internal fault with the super capacitor
2061757/32024-07-06. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY/WIPER. DTC B2000F2: Faulty control module (Symptom code 4102) and/or night vision warning light evident within the (DIP). Customer statement: Night vision warning lamp (Figure 1) is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 - Night vision control module.
2068946/72024-07-04. Service bulletin. SUSPENSION; ELECTRICAL SYSTEM. DTC P0B2500 logged within address 0021 (Battery Energy Control Module 2) - Dynamic ride system warning visible. Customer statement / workshop findings Customer statement: Bentley dynamic ride system fault is displayed within the Drivers Instrument Panel (DIP) Workshop findings: DTC P0B2500 - Hybrid/EV Battery "A" Voltage low is stored within address 21- Battery Energy Control Module 2 Technical background: Possible internal fault with the super capacitor
2073967/12024-07-02. Service campaign. ELECTRICAL SYSTEM. Emergency call module and communication unit (0075) - Software update - Dongle removal (SC24/13). Technical background: ODIS will automatically default to DoIP when the Bentley ODIS-S Brand version is 2.32.3 (Or later) • In the event the software update is conducted WITHOUT the use of DoIP (Diagnostics over Internet Protocol) failure may occur which can result in the replacement of the Emergency call module and communication unit - Diagnostic address 0075. Remedy: The software update within the Work section is required to apply the latest software to the Emergency call module and communication unit - Diagnostic address 0075
2073955/12024-06-04. Service bulletin. FUEL/PROPULSION SYSTEM; ENGINE; ELECTRICAL SYSTEM. New Flying Spur (Hybrid) and Bentayga (Hybrid) - DTC P019100: Fuel Rail Pressure Sensor "A" Circuit Range/Performance. Customer statement / workshop findings Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with a “Drive System Fault” warning, the following DTC listed below evident within Engine control module 1: • P019100 Fuel Rail pressure Sensor ‘A’ Circuit Range/Performance Technical background On engine restart after a drive (engine at operating temperature) the check engine lamp illuminates within the DIP with a “Drive System Fault” warning - DTC P019100 is logged
2071239/22024-06-04. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Coolant pump leaking (part number 07P 121 008C) - Low coolant warning - Engine overheating - DTC's evident. Customer statement / workshop findings: One or a combination of the following is evident: • Coolant leaking from the mechanical coolant pump • Coolant witness marks on the mechanical coolant pump although coolant is not leaking/dripping from the pump • Low coolant level warning displayed within the DIP Or • Engine overheating issues and/or DTC P218100: Cooling System Performance with symptom code 8113 or air in the coolant DTC’s (various) is evident, in this scenario the operative should also refer to TPI 2051893

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.