WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Audi A8

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1325 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
A441336 2022563-2017-11-17. Service bulletin. SUSPENSION. Supersedes Technical Service Bulletin Group 44 number 13-35 dated January 18, 2013. Customer feels vibration from 55 - 80 mph (88 - 128 km/h) in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not result in any handling concerns or loss of vehicle control.
A011369 2028344-2017-11-17. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300°C (572°F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.
Dealer Letter -2017-11-17. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE. This communication is to inform you of Update 23L9. On Audi A8 TDI manufactured within a specific period of time the idle speed may cause vibrations. Update the ECM software to the latest level.
Fluid Capacity C2017-11-17. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This document contains the vehicle's fluid capacity chart
Update Bulletin2017-11-17. Service bulletin. ENGINE. On Audi A8 TDI manufactured within a specific period of time the idle speed may cause vibrations. This Update is in effect until removed. Procedure is valid only for vehicles that show the 23L9 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be in Federal Emissions Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. On Audi A8 TDI manufactured within a specific period of time the idle speed may cause vibrations.
A001348 2002047-2017-11-17. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
A011375 2033224-2017-11-17. Service bulletin. FUEL SYSTEM, DIESEL. If an Audi model year 2014 A8L TDI clean diesel (engine code CPNA) requires diagnosis or repair of the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue and emissions) systems, or transmission, a Repair Authorization is necessary prior to repair. This also applies to any messages related to AdBlue shown in the DIS. These procedures are mandatory until further notice. Routine maintenance, PDI, and repair of other systems do not require prior authorization or a TAC ticket. Any repairs related to the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue or emissions) systems, or transmission completed without Repair Authorization via a Technical Assistance Center (TAC) contact will not be reimbursed. In an effort to gain information on the systems listed above, we are asking that you contact TAC before replacing any parts. This will assist us in diagnosing any potential issues.
A191335 2025303-2017-11-17. Service bulletin. ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A551329 2031273-2017-11-17. Service bulletin. LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK. Supersedes Technical Service Bulletin Group 55 number 13-28 dated February 27, 2013. The movement-activated rear lid opening (also known as "Hands-free trunk release") sporadically is inoperative. This feature is installed on all A8 vehicles with Audi advanced key (PR No. 4I3) from CW 45/2011 production.
A571385 2017082-2017-11-17. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Supersedes Technical Service Bulletin Group 57 number 13-82 dated February 5, 2013. Central locking via remote control does not work either sporadically or permanently. The locks can still be operated manually. Missing synchronization between the remote control key and vehicle because the battery has been disconnected or the battery of the remote control has been replaced. If other senders operate in the same frequency range (mobile phones, TV stations, wireless headphones, baby monitors, other vehicle remote controls, etc.), the remote control key may have been temporarily switched off because a clear identification of the remote control key is not possible. This is necessary to prevent an unintentional unlocking of the vehicle by other unrelated senders.
A571386 2027368-2017-11-17. Service bulletin. STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Supersedes Technical Service Bulletin Group 57 number 12-73 dated September 24, 2012. The exterior door handle touch sensors (Advanced key) are inoperative on one or several doors. The key blade can be used mechanically (driver door or trunk) or remote electrically (key remote buttons) to unlock and lock the vehicle.
A911378 2033355-2017-11-17. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. Adaptive Cruise Control (ACC) does not work. The message "ACC and braking guard: unavailable at this time. No sensor vision" appears in the instrument cluster. DTC is logged in the distance regulation control module, J428 (address word 13).
AVT-13-062017-11-17. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL. VAS-PC Audi Brand DVD V19.48.00, (Technical Literature ordering number A48.5001.21.21) is being shipped to all Audi dealers. Hardware problems during the installation of new Brand DVDs are minimized if users regularly perform the Windows hard disc maintenance utility ?chkdsk?. If your device has never had hard disc maintenance performed via the Windows ?chkdsk? utility, please perform this maintenance prior to installation of this Brand update, and ensure that it be performed on a regular basis to ensure reliable software functions. Brand DVD V19.48.00 must only be installed on VAS-PC testers that were previously updated with Base V19.01.01. After installation of the Brand DVD, all stored Diagnosis Jobs are erased; therefore complete work beforehand if required. DO NOT install the Brand DVD V19.48.00 on VAS 5051A or 5052 testers.
AWA-13-022017-11-17. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. During the launch of the new Audi A8L TDI, authorized Audi dealers must participate in the Audi A8L TDI Launch Allowance Program. A Technical Assistance Center (TAC) ticket must be created prior to any repair related to the TDI engine, diesel fuel delivery, exhaust aftertreatment system, or transmission issues, and each ticket must include diagnostic logs and a detailed summary for each customer concern. The ticket must be activated by calling the TAC for further instructions; the case number assigned must be recorded on the repair order. The concern must be corrected after authorization. Findings must be reported to close the TAC ticket. Part(s) replaced under warranty must be sent to the Warranty Parts Return Center (WPRC) within 48 hours after completing the repair. (Use the Warranty Party Shipping Portal)
AWC-13-062017-11-17. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This document conveys general information on the VAS tester brand software V19.48.00. The benefit is that after updating the VAS tester with this software version, you will no longer need to follow the Service Information work around document AVT-13-05.
Email Mandatory2017-11-17. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This document contains the important email to all Audi dealership personnel in regards to the immediate madatory stop-sale order that is in effect to all vehicles from 20110-2015 that have a 2.0L TDI engine.
A961501 2019260-2017-11-17. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Supersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 model years 2005?2006 and A3 model year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer?s HomeLink® opener system is using an alternate code. The handheld transmitter?s programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
A911517 2042013-2017-11-17. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. While using Audi connect, the customer cannot access the online destination search and/or the Google Earth navigation view. ?This service is currently unavailable. Please try again later" message appears in the MMI. The customer may also see an error message in the myAudi portal indicating that one or multiple licenses are expired and must be renewed. Replacing the SIM card or MMI hardware or performing the SVM recovery activation will not remedy the concern.
A911516 2038927-2017-11-17. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Supersedes Technical Service Bulletin Group 91 number 14-70 dated November 6, 2014. The overhead view camera system or one of its cameras does not work. DTCs are logged in the rearview camera system control module. DTCS for the affected camera may also be logged. Incorrect component.
A871570 2041717-2017-11-17. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Supersedes Technical Service Bulletin Group 87 number 15-67 dated August 19, 2015. This bulletin applies to any repair that requires replacement of the air conditioning compressor. Any replacement of A/C compressors?regardless of the reason for failure?must include an ODIS GFF cooling performance test plan of the A/C system with documentation of the recovered refrigerant volume. This GFF test plan requirement is mandatory without exception.
A701547 2038029-2017-11-17. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. Supersedes Technical Service Bulletin Group 70 number 15-44 dated February 25, 2015. Various squeaks and/or rattles are heard from the roof area on vehicles equipped with a panoramic sunroof. These noises can be created by the points of contact between the sunroof cover trim frame and the clips that retain it to the headliner.
A191562 2025303-2017-11-17. Service bulletin. ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A171565 2038129-2017-11-17. Service bulletin. ENGINE. Supersedes Technical Service Bulletin Group 17 number 15-63 dated June 2, 2015. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
A011544 2041944-2017-11-17. Service bulletin. ELECTRICAL SYSTEM. The MIL is on and/or glow plug light on. DTCs are stored in the ECM. No relevant component or electrical problems are found when Guided Fault Finding (GFF) is run on the stored fault codes. Cars exhibiting the issue outlined in this TSB will also show a pattern in the DTC expanded ambient conditions under the P200200 fault code. Soot mass measured value above 40 g. Soot mass calculated value approximately 30 g. Kilometers since last regeneration value are above 500,000 m. The current ECM software does not accurately detect a momentary rise in DPF backpressure, resulting in a soot overload fault.
A011542 2041787-2017-11-17. Service bulletin. ELECTRICAL SYSTEM. DTCs are stored in the ECM. There may be soot buildup on the moveable elements of the pressure sensing glow plug (PSG).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.