WenmarOpen by Wenmar Pro

Service bulletins for the 2012 Audi A6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1506 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
011384202773292022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). no leak in EVAP system. New software in the ECM addressed the condition.
011373203322312022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. Engine warning light on after engine replacement
011371202773282022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. New software in the engine control module, J623 (01) addressed the condition.
011366203145832022-10-31. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes.
011345203145842022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions (such short-distance, stop-and-go driving), high crankcase pressure can cause the DTCs to appear.
001463203357622022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION: OIL COOLER. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
001459202973722022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
0114682027732132022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. No leaks found in the EVAP system. Software update needed.
011463203363022022-09-26. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
011403203322332022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
0113992027732112022-09-26. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE:EVAPORATIVE EMISSIONS:CANISTER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). 01 MIL on, no leak in EVAP system (DTC P045600 in ECM. Software update needed.
0113852027732102022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); FUEL SYSTEM, GASOLINE:STORAGE:EVAPORATIVE EMISSIONS:CANISTER. no leak in EVAP system. New software in the ECM addressed the condition.
011384202773292022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). no leak in EVAP system. New software in the ECM addressed the condition.
011373203322312022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Engine warning light on after engine replacement
011371202773282022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. New software in the engine control module, J623 (01) addressed the condition.
011366203145832022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV); ELECTRICAL SYSTEM. Under extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes.
011345203145842022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions (such short-distance, stop-and-go driving), high crankcase pressure can cause the DTCs to appear.
011329203322322022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
011258203145812022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Under extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes. By changing the crankcase pressure valve to a lower operating pressure this condition can be improved and eliminate the mentioned possible DTC codes. Along with the crankcase pressure being lowered, a new ECM software level is required to compensate for new crankcase pressure.
001463203357622022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
001459202973722022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
1313203124542022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Under certain driving conditions, the linkage for the waste gate actuation can encounter excessive wear which leads to play at the waste gate flap. This leads to boost escaping through a loose flap, which sets DTC P0299 (Negative Pressure Deviation).
1312203124532022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Under certain driving conditions, the linkage for the waste gate actuation can encounter excessive wear which leads to play at the waste gate flap. This leads to boost escaping through a loose flap, which sets DTC P0299 (Negative Pressure Deviation).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.