Service bulletin T024
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11033925 |
| Published by NHTSA | 2026-06-17 |
| Manufacturer's number | T024 |
| Manufacturer's date | 2026-06-16 |
| NHTSA component | POWER TRAIN |
NHTSA's summary
"KW & PB: New software is available for download. The DAVIE4 cache must be cleared before attempting to reprogram a chassis that is experiencing problems to ensure the latest version of software is installed. Follow all steps in the attached procedures before submitting a TCS case."
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline
| KENWORTH T280 | 2025, 2026 |
|---|---|
| KENWORTH T380 | 2025, 2026 |
| KENWORTH T480 | 2025, 2026 |
| KENWORTH T680 | 2025, 2026 |
| KENWORTH T880 | 2025, 2026 |
| KENWORTH W990 | 2025, 2026 |
| PETERBILT 537 | 2025, 2026 |
| PETERBILT 548 | 2025, 2026 |
| PETERBILT 567 | 2025, 2026 |
| PETERBILT 579 | 2025, 2026 |
| PETERBILT 589 | 2025, 2026 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V903000 | 2024-12-02. POWER TRAIN:AXLE HUBS |
|---|---|
| 24V190000 | 2024-03-20. POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| T-024 | 2026-06-17. Service bulletin. The repair procedure has been updated to include diagnostic steps. |
|---|---|
| 27-012 | 2026-06-17. Service bulletin. The attachment for Eaton bulletin TAIB-1015 has been updated to the latest version to improve process flow. |
| 27-012 | 2026-06-03. Service bulletin. KW: A Transmission Control Module (TCM) software update is now available for certain T680, T880, and W990 chassis with Eaton Endurant transmissions, TCM software version R5.5 or later and an AT5 controller, where the TASPS fails. Please see the Eaton bulletin TAIB-1015 in the Attachments section for details. PB: A Transmission Control Module (TCM) software update is now available for certain Model 567, 579, and 589 chassis with Eaton Endurant transmissions, TCM software version R5.5 or later and an AT5 controller, where the TASPS fails. Please see the Eaton bulletin TAIB-1015 in the Attachments section for details. |
| T024 | 2026-06-03. Service bulletin. KW: A Transmission Control Module (TCM) software update is now available for certain T280, T380, T480, T680, T880, and W990 chassis with PACCAR TX-12 and TX-18 transmissions, TCM software version R5.5 or later and an AT5 controller, where the TASPS fails. PB: A Transmission Control Module (TCM) software update is now available for certain Model 537, 548, 567, 579, and 589 chassis with PACCAR TX-12 and TX-18 transmissions, TCM software version R5.5 or later and an AT5 controller, where the TASPS fails. |
| 24PBE_24KWE | 2026-02-05. Warranty extension. 24PBE_24KWE RH Shift Stalk Update Warranty section has been updated with revised verbiage for picture requirements. |
| 24PBE/KWE | 2026-01-06. Warranty extension. The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness connector. Loss of communication between the right-hand shift stalk and the vehicle may result in the vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning will appear on the dash display when communication is lost, including transmission or engine warnings, “!” next to DNR/DNRP indicator, “-“ in the DNR/DNRP indicator, and/or chimes, depending upon whether you are operating a diesel/gas or battery electric vehicle. |
| 27-011 | 2026-01-06. Service bulletin. A transmission control module (TCM) software update is now available for certain T680 / T880 / W900 / W990 chassis with Eaton Endurant transmissions running TCM software version 5516372, where the PTO fails to operate or engage. Please see the attached Eaton bulletin TAIB- 1021 in the Attachments section of this bulletin for complete details. |
| 24KWE | 2025-12-05. Service campaign. The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness connector. Loss of communication between the right-hand shift stalk and the vehicle may result in the vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning will appear on the dash display when communication is lost, including transmission or engine warnings, “!” next to DNR/DNRP indicator, “-“ in the DNR/DNRP indicator, and/or chimes, depending upon whether you are operating a diesel/gas or battery electric vehicle. |
| 24PBJ | 2025-08-05. Service bulletin. "Safety Recall Parts and repair procedures are now available. Certain Meritor 10-16K and 18-23K Front Steer Drive Axles may have insufficient wheel bearing grease. Insufficient lubrication in the wheel bearing may cause the wheel hub to overheat and become damaged, which may increase the risk of a crash or thermal event . The driver may hear noise, excessive steering play, and/or smoke from the front wheel. |
| 24KWJ | 2025-08-05. Service bulletin. Parts and repair procedures are now available. Certain Kenworth model T380 and T480 chassis equipped with a Meritor 10-16K or 18-23K Front Steer Drive Axle have been identified as possibly having insufficient wheel bearing grease. Insufficient lubrication in the wheel bearing may cause the wheel hub to overheat and become damaged, which may increase the risk of a thermal event. The driver may observe noise, excessive steering play, and/or smoke from the front wheel. |