WenmarOpen by Wenmar Pro

Service bulletin 22N15

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10249489
Published by NHTSA2024-02-01
Manufacturer's number22N15
Manufacturer's date2024-01-19
NHTSA componentELECTRICAL SYSTEM:BODY CONTROL MODULE:SOFTWARE; UNKNOWN OR OTHER

NHTSA's summary

Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Addinf owner letters. First part submitted 01/02/24

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Body control module

Vehicles listed
FORD BRONCO SPORT2021, 2022
FORD E-1502021 to 2022
FORD E-2502021 to 2022
FORD E-3502021, 2022
FORD E-4502021, 2022
FORD ESCAPE2020, 2021
FORD F-532020 to 2022
FORD F-592020 to 2022
FORD F-650 SD2021, 2022, 2023 (the catalog's model; the bulletin names a series or trim of it)
FORD F-750 SD2021, 2022, 2023 (the catalog's model; the bulletin names a series or trim of it)
LINCOLN CORSAIR2020, 2021

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
25V1580002025-03-14. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM
24V2670002024-04-12. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
20V6350002020-10-15. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SSM 523332024-03-20. Service bulletin. Many body control module C (BCMC) warranty return parts are coming back with no trouble found. To verify that the BCMC is at fault prior to replacing, perform the following. First, disconnect the battery then check all BCMC connectors for terminal pushout, pin damage, spread terminals, and corrosion. Refer to Workshop Manual Section 100-00 Wire Terminal Inspection and Replacement. If none found, reconnect the BCMC and battery terminals then recheck functionality. If concern still exists, proceed with BCMC replacement.
SSM 522132024-01-30. Service bulletin. Some 2022-2023 F-150 and 2023 F-Super Duty vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit a Please Contact Authorized Dealer For Service message in the center display screen with DTC P0A93:96 stored in the DCACA. This may be due to the software level of the DCACA and has no effect on vehicle operation. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, reprogram the DCACA to the latest software level using the latest version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19G317 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
23H072023-12-05. Service bulletin. Certain 2021-2023 Model Year F150, 2022 Model Year F53/F59 Stripped Chassis, 2022-2023 Model Year F650/F750, 2023 Model Year Ranger, 2024 Model Year Econoline - Body Control Module (BCM) Replacement
SSM 516752023-06-08. Service bulletin. Some 2023 F-Super Duty vehicles equipped with SYNC 4 may experience programming errors after a replacement of the body control module (BCM) for various concerns. After programmable module installation (PMI) of the new BCM, diagnostic trouble codes (DTC) U2100:00, U2101:00 and/or U211B:87 may be present. Download and run the Ford Diagnosis and Repair System (FDRS) application titled Trusted Real-Time Operation Network (TRON) Module Authentication, and perform the TRON Diagnosis and Repair and Reset ECU on CAN BUS routines. Once both TRON routines have been completed, re-run the BCM PMI application. Verify that all BCM DTCs have cleared. Service procedures are being updated to improve this process. Monitor OASIS for updates.
SSM 516642023-05-31. Service bulletin. Some 2023 F-Super Duty vehicles equipped with SYNC 4 may require a replacement of the body control module (BCM) for various concerns. After programmable module installation (PMI) of the new BCM, diagnostic trouble codes (DTC) U2100:00, U2101:00 and/or U211B:87 may be present. Download and run the Ford Diagnosis and Repair System (FDRS) application titled Trusted Real-Time Operation Network (TRON) Module Authentication, and perform the TRON Diagnosis and Repair and Reset ECU on CAN BUS routines. Once both TRON routines have been completed, re-run the BCM PMI application. Verify that all BCM DTCs have cleared. Service procedures are being updated to improve this process. Monitor OASIS for updates.
SSM 515782023-05-04. Service bulletin. Some 2023 F-Super Duty vehicles may set DTCs B109F:55, B1330:9A, U0252:87, U0198:87, U0184:87, U0155:87, U0256:87, and/or U0100:87 in the BCM when a diagnostic self-test is performed. This may be due to an incorrect sequence of an internal measurement unit during self-test causing a false history status DTC (0x48 or 0x08 status). The DTC matures to history status because the BCM detects nothing is wrong. Replacement or reprogramming of the BCM will not resolve this condition. B109F:55, B1330:9A, U0252:87, U0198:87, U0184:87, U0155:87, U0256:87, and/or U0100:87 should be ignored if: no other DTCs are present in the BCM, the malfunction indicator lamp (MIL) is not illuminated while the engine is running, and no drivability concerns are present. No further service action is required.
SSM 496922021-03-31. Service bulletin. Some 2021-2022 E-Series vehicles built on or before 09-Mar-2021 may exhibit a Service Advance Trac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperable. To correct the condition, reprogram the ABS module using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part number 2C215 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.